71 research outputs found
Multiple-inlet BIPV/T Modeling: Wind Effects and Fan Induced Suction
AbstractBuilding Integrated Photovoltaic/Thermal (BIPV/T) collectors take up the role of energy and heat production, while acting as a rain-screen cladding. A multiple inlet BIPV/T system counters the effect of high temperature stratification on the PV layer, by enhancing the convection inside the air channel with the introduction of more than one openings for the intake of fresh air that break up the surface boundary layer. To investigate the uniformity of heat extraction from the PV panels, the fluid mechanics of the system are studied separately from the thermal effects. A numerical flow distribution model, which incorporates wind effects, is introduced for the optimal design of multiple inlet systems so as to have flow rates through each inlet that maximize the heat extracted from the PV panels
Multiple-inlet Building Integrated Photovoltaic/Thermal system modelling under varying wind and temperature conditions
Multi-objective optimal design of a near net zero energy solar house
This paper presents a multi-objective redesign case study of an archetype solar house based on a near net zero energy (NZE) demonstration home located in Eastman, Quebec. Using optimization techniques, pathways are identified from the original design to both cost and energy optimal designs. An evolutionary algorithm is used to optimize trade-offs between passive solar gains and active solar generation, using two objective functions: net-energy consumption and life-cycle cost over a thirty-year life cycle. In addition, this paper explores different pathways to net zero energy based on economic incentives, such as feed-in tariffs for on-site electricity production from renewables. The main objective is to identify pathways to net zero energy that will facilitate the future systematic design of similar homes based on the concept of the archetype that combines passive solar design; energy-efficiency measures, including a geothermal heat pump; and a building-integrated photovoltaic system. Results from this paper can be utilized as follows: (1) systematic design improvements and applications of lessons learned from a proven NZE home design concept, (2) use of a methodology to understand pathways to cost and energy optimal building designs, and (3) to aid in policy development on economic incentives that can positively influence optimized home design
Design of Predictive Control Strategies for Active BITIES Systems Using Frequency Domain Models
Active building-integrated thermal energy
storage (BITES) systems, such as ventilated concrete
slabs, are able to effectively store and release
abundant of thermal energy to assist space
conditioning. Since active BITES systems are
strongly thermal-coupled to the rest of the room, the
desires for comfortable room temperature and
utilization of renewable thermal energy, together with
BITES' large thermal inertia place challenges in the
operation of active BITES systems. With desired
room temperature profiles and corresponding thermal
loads, frequency domain models can readily provide
predictive operation information for the active BITES
systems. This paper will demonstrate the concept,
methodology, and techniques in using frequency
domain models to conduct predictive operations of
active BITES systems. Using frequency domain
models in optimizing the design of active BITES
systems will also be discussed
An information driven hybrid evolutionary algorithm for optimal design of a Net Zero Energy House
Building Performance Simulation (BPS) is a powerful tool to estimate and reduce building energy consumption at the design stage. However, the true potential of BPS remains unrealized if trial and error simulation methods are practiced to identify combinations of parameters to reduce energy use of design alternatives. Optimization algorithms coupled with BPS is a process-orientated tool which identifies optimal building configurations using conflicting performance indicators. However, the application of optimization approaches to building design is not common practice due to time and computation requirements. This paper proposes a hybrid evolutionary algorithm which uses information gained during previous simulations to expedite and improve algorithm convergence using targeted deterministic searches. This technique is applied to a net-zero energy home case study to optimize trade-offs in passive solar gains and active solar generation using a cost constraint
Mortars with incorporation of phase change materials (PCM): physical and mechanical properties and durability
O despertar da consciência ambiental pela sociedade, tem levantado problemas até então ignorados tais como os consumos energéticos. Numa sociedade com um elevado ritmo de crescimento e padrões de conforto cada vez maiores, surge a necessidade de minimizar os elevados consumos energéticos, tirando partido de fontes de energia renováveis. As argamassas com incorporação de materiais de mudança de fase (PCM) possuem a capacidade de regular a temperatura no interior dos edifícios, contribuindo desta forma para o aumento do nível de conforto térmico e diminuição do recurso a equipamentos de climatização, apenas com recurso à energia solar. Contudo, a incorporação de materiais de mudança de fase em argamassas modifica algumas das suas principais características. Portanto, o principal objetivo deste estudo consistiu na caracterização física e mecânica de argamassas aditivadas com PCM, assim como na avaliação da sua durabilidade. Para tal foram desenvolvidas 12 composições distintas, à base de diferentes ligantes e dopadas com 40% de PCM. Tendo sido possível observar que a incorporação de PCM provoca diferenças significativas em propriedades tais como a trabalhabilidade, resistência à compressão, resistência à flexão, aderência, absorção de água por capilaridade, absorção de água por imersão e resistência a ações de gelo-degelo. Contudo, foi possível concluir que a incorporação de PCM nas argamassas pode ser realizada com sucesso. Sendo que, as alterações verificadas nas argamassas podem ser contornadas através da incorporação de uma maior dosagem de ligante, superplastificante e até mesmo a inclusão de fibras. Apesar dos resultados desta investigação serem promissores é importante referir que outras investigações devem ser realizadas com o intuito de observar a influência do PCM em argamassas constituídas por outros materiais.The awakening of environmental awareness by society has raised issues previously ignored such as energy consumption. In a society with a high growth rate and increased standards of comfort arises the need to minimize the currently high energy consumption by taking advantage of renewable energy sources. The mortars with incorporation of phase change materials (PCM) have the ability to regulate the temperature inside buildings, contributing to the thermal comfort and reduction of the use of heating and cooling equipment, using only the energy supplied by the sun. However, the incorporation of phase change materials in mortars modifies its characteristics. The main purpose of this study was the physical and mechanical characterization, as well the evaluation of the durability. Twelve compositions were developed, based in different binders and doped with 40% of PCM. It was possible to observe that the incorporation of PCM in mortars caused significant differences in properties, such as workability, compression strength, flexural strength, adhesion, water absorption by capillarity, water absorption by immersion and degradation after freeze-thaw cycles. However, it was concluded that the incorporation of PCM in mortars can be performed successfully. Being that the changes in mortars can be solved by incorporating a higher content of binder, superplasticizer and the inclusion of fibers. Although the results of this investigation are promising it is important to note that further investigations should be performed aiming to observe the influence of PCM in mortars composed by other materials.Fundação para a Ciência e Tecnologia pelo financiamento deste trabalho de investigação desenvolvido no âmbito do projeto “ Contribuição de Argamassas Térmicas Ativas para a Eficiência Energética dos Edifícios” (PTDC/ECM/102154/2008) e à atribuição da bolsa individual de doutoramento com referência SFRH/BD/95611/2013
Simulation-based assessment of the energy savings benefits of integrated control in office buildings
From the Sum of Near-Zero Energy Buildings to the Whole of a Near-Zero Energy Housing Settlement: The Role of Communal Spaces in Performance-Driven Design
Almost a century ago Modernism challenged the structure of the city and reshaped its physical space in order to, amongst other things, accommodate new transportation infrastructure and road networks proclaiming the,nowadays much-debated ‘scientificated’ pursuit of efficiency for the city. This transformation has had a great impact on the way humans still design, move in, occupy and experience the city. Today major cities in Europe, such as Paris
and London, are considering banning vehicles from their historic centers. In parallel, significant effort is currently underway internationally by designers,
architects, and engineers to integrate innovative technologies and sophisticated solutions for energy production, management, and storage, as well as for
efficient energy consumption, into the architecture of buildings. In general, this effort seeks for new technologies and design methods (e.g., DesignBuilder
with EnergyPlus simulation engine; Rhicoceros3D with Grasshopper plugin and Ecotect, Radiance and EnergyPlus tools) that would enable a holistic approach to the spatial design of Near-Zero Energy buildings, so that their
ecological benefits are an added value to the architectural design and a building’s visual, and material, impact on its surrounding space. The paper inquires how the integration of such technological infrastructure and performance-orientated interfaces changes yet again the structure and form of cities, and to what extent it safeguards social rights and enables equal access to common
resources. Drawing from preliminary results and initial considerations of ongoing research that involve the construction of four innovative NZE settlements
across Europe, in the context of the EU-funded ZERO-PLUS project, this paper discusses the integration of novel infrastructure in communal spaces of these settlements. In doing so, it contributes to the debate about smart communities and their role in the sustainable management of housing developments and settlements that are designed and developed with the concept of smart territories
Thermal and electrical modelling of a double-skin façades integrating bifacial photovoltaics: energy and economic performance assessment
Conclusion, research needs, and future directions
This is the conclusory chapter of the book which presents the state-of-the-art in terms of modeling, simulation, and design of net-zero energy buildings (Net ZEBs), including a combination of modeling fundamentals and theory, a review of selected technologies, and four in-depth case studies of actual near-net-zero to positive energy buildings in four different climatic regions covering both the residential and commercial/institutional sectors. These case studies have clearly identified that the pathways to reach the net-zero energy target are numerous and diverse, but should be carefully customized for the particular building type, its intended function and operation, and climate. The book reveals the importance of choosing the right approach and model resolution at different stages of the design. It identifies important gaps in building simulation and design tools as well as methodologies. The book explains modeling and design issues for the common and appropriate technologies, systems, and strategies for Net ZEBs
- …