4 research outputs found
์คํธ๋ฆฝ ์ ๊ทน์ ์ด์ฉํ ๋ฐฉ์ ๊ฐ๊ณต
ํ์๋
ผ๋ฌธ (๋ฐ์ฌ)-- ์์ธ๋ํ๊ต ๋ํ์ : ๊ธฐ๊ณํญ๊ณต๊ณตํ๋ถ, 2013. 2. ์ฃผ์ข
๋จ.In this research, a strip-electrode system was developed to overcome the problem of electrode wear in electrical discharge machining (EDM). In general EDM, electrode wear causes shape errors to the workpiece. High production costs must be incurred to resolve such errors. Strip EDM makes efficient use of the electrode, eliminating the need for additional machining processes or methods to resolve shape errors. The strip electrode moves continuously along the electrode guide, creating the same conditions found in wire EDM, where the worn electrode is immediately replaced with a new one. The strip slides along the surface of an electrode guide in the strip EDM system. During the actual machining process, the entire guide system moves along the tool path. The electrode guide acts like a block electrode in general EDM and the strip acts like the surface of an electrode. This effectively eliminates concern about tool electrode wear during machining. Using the machining system developed, three major applications were tested in this study: milling, turning, and V-grooving. When the strip machining system was applied to ED-milling, grooves and curved structures were fabricated without having to compensate for electrode wear. Strip EDM was applied to turning and the results promise excellent accuracy at a high machining speed. V-grooving to make several types of cutting angles was also investigated and the strip-EDM method was successfully used to cut various shapes from a stainless steel workpiece.Abstract
Contents
List of Figure
List of Table
1. Introduction
2. Electrical Discharge Machining
2.1 Principles of EDM
2.1.1 Die-sinking EDM
2.1.2 ED-drilling
2.1.3 Wire EDM
2.2 Principles of electrode wear in the EDM process
2.3 Electrode wears according to types of EDM
2.4 General method for reducing electrode wear problems 2.4.1 Compensative tool path
2.4.2 Finish cut process with a new electrode
2.4.3 Long pulse-on time in kerosene
3. Development of the Strip-EDM System
3.1 Development of the strip-EDM electrode system
3.2 Machining system used in this study
4. Strip EDM for the Milling Process
4.1 Milling procedure
4.2 Machining conditions in strip ED-milling
4.3 Effect of electrode material
4.3.1 Material removal rate
4.3.2 Surface quality
4.4 Effect of strip feed speed
4.5 Effect of machining area
4.5.1 Principle of area effect
4.5.2 Area effect of strip ED-milling
4.6 Comparison block electrode
4.6.1 Use of block electrode
4.6.2 Use of wire electrode
4.7 Applications of strip ED-milling
4.7.1 Normal milling
4.7.2 V-grooving
5. Strip EDM for the Turning Process
5.1 Turning procedure
5.1.1 Machining process
5.1.2 Turning system
5.2 Machining conditions in strip ED-turning
5.3 Machining results
5.4 Comparison to wire ED-turning
5.5 Application machining using strip ED-turning
6. Adjustable V-grooving
6.1 Adjustable V-grooving procedure
6.1.1 Machining process
6.1.2 Machining system
6.2 Machining conditions of adjustable V-grooving
6.3 Machining results
7. Conclusion
ReferencesDocto
(์ฃผ)์์ด๋ฆฌ๋ฒ : World Class ๋ธ๋๋๋ฅผ ์งํฅํ๋ค
(์ฃผ)์์ด๋ฆฌ๋ฒ(iRiver)์ 2002๋
๋งค์ถ์ก์ 640์ต ์์ด๊ณ ๋งค์ถ์ด์ด์ต์ 171์ต ์์ด๋ค. ๊ทธ๋ฆฌ๊ณ ์์ด
๋ฆฌ๋ฒ์ ์ฃผ์์ ์ฅ์ธ์์ฅ์์ 1์ฃผ๋น 5๋ง 6์ฒ์์ ๊ฑฐ๋๋๊ณ ์๋ค. ์์ด๋ฆฌ๋ฒ์ ์ง์๋ค์ ์์ ์ด ๋ชธ๋ด
๊ณ ์๋ ํ์ฌ์ ์ฑ๊ณต์ ๊ธฐ๋ถ์ด ๋ค๋ ์๋ค. ๊ทธ๋ฌ๋ ์์ด๋ฆฌ๋ฒ ์๋์ค ์ฌ์ฅ์ ๋จธ๋ฆฟ์์ ๋ณต์กํ๋ค. 2003
๋
9์ 3์ผ ํ๋งํ ์ธ๊ณ ์ต๋ AV์ ์ํ์ธIFA2003์์ ํ๋ฆฝ์ค(Phillips), ํ๋์๋(Panasonic),
ํฐ์จ(Thomson)๊ณผ ๊ฐ์ ์ ๋ช
๊ธฐ์
๋ค์ด MP3ํ๋ ์ด์ด๋ฅผ ์ ๋ณด์๊ธฐ ๋๋ฌธ์ด๋ค. ๋ช ๋
์ ๋ถํฐ MP3 ์
์ฅ์ ๋ฐ์ด๋ ์๋(SONY)๋ ์ค๊ตญ์ ์์ฐ๊ฑฐ์ ์ ํ๋ณดํ์ฌ ๊ฐ๊ฒฉ๊ฒฝ์๋ ฅ๋ ๊ฐ์ถ๊ณ ์๋ค. ๊ตญ๋ด์์ฅ์
์๋ ๋์งํธ์จ์ด, ๊ฑฐ์์์คํ
, ํ์๊ณผ ๊ฐ์ ๊ธฐ์
์ด ์์ด๋ฆฌ๋ฒ๋ฅผ ๊ฑฐ์ธ๊ฒ ์ถ๊ฒฉํด ์ค๊ณ ์๋ค. ์ ์ฌ์ฅ
์ ๋ง์์ ๋์ฑ ๋ฌด๊ฒ๊ฒ ํ๋ ๊ฒ์ MP3์ ๋ค๋ฅธ ๊ธฐ๋ฅ์ด ์ตยท๋ณตํฉ๋ ์ ํ์ด ํ๋๋์ฉ ์์ฅ์ ์ ๋ณด์ด
๊ณ ์๋ค๋ ๊ฒ์ด๋ค. ์ด๋ฒ ์ ์ํ์ ์๊ฐ๋ MP3์ ์ฌ์ง, ๋์์ ๋ฑ์ ๋์์ ๊ธฐ๋กํ๊ณ ๊ฐ์ํ ์ ์
๋ ํ๋์๋์ SV-20๊ณผ ๊ตญ๋ด ํธ๋ํฐ ์์ฅ์์ ๋งค์ถ์ ๋๋ฆฌ๊ณ ์๋ SKํ
๋ ํ
์ MP3 ๊ฒธ์ฉ ํธ๋ํฐ
์ด ๋ํ์ ์ธ ์ ํ์ด๋ค. ์ ์ฌ์ฅ์ ์ง๊ธ๊ณผ๋ ๋ค๋ฅธ ์ ๋ต์ด ํ์ํ๋ค๋ ๊ฒ์ ํผ๋ถ๋ก ๋๋ผ๊ณ ์๋ค.
๊ณผ์ฐ ์ด๋ป๊ฒ ํด์ผ ์์ด๋ฆฌ๋ฒ์ ์ฑ๊ณต์ ์ด์ด๊ฐ ์ ์์๊น? ์ ์ฌ์ฅ์ ๋์ธ๊ฒ ๊ธฐํ์ด์ฌ๋ฅผ ๋ถ๋ ๋ค..