67 research outputs found

    Study on the industrial control system based on can field-bus and its application

    Get PDF
    随着计算机技术、通信技术和控制技术的发展,传统的工业控制领域正经历着一场前所未有的变革,而工业控制的网络化,更拓展了工业控制领域的发展空间,带来新的发展机遇。基于嵌入式技术和现场总线技术的兴起和广泛应用,本文以工业现场和机电设备控制的需求为基础,研究开发基于嵌入式技术的能够完成多种控制任务和数据通信功能的多用途工业控制器,并以此为独立的智能控制节点构建一个基于现场总线的工业网络控制系统,以满足多种工业控制的要求。本文所设计的系统中作为个体的智能控制器可以独立实现控制任务,也可以通过现场网络进行联机工作,具有个体系统的独立性与网络化的联机性相结合的特点,对解决各种中小型生产设备的自动化程序控制和...With the development of computer,as well as communication and control technology, the traditional industrial control field is going through an unprecedented change,and industrial controlling network widens industrial control field ,brings about a new opportunity for development. Based on the boosting of embedded technology and Field-bus,to meet the requirements for control in industrial fields and...学位:工学硕士院系专业:物理与机电工程学院机电工程系_机械电子工程学号:20042902

    Design of Radar System for Backing a Car Based on a MCU

    Get PDF
    设计实现了一种倒车用超声波测距仪;系统以MC68HC908GP32型微控制器为核心进行模块化设计,采用4路探头进行超声波的发射和接收,通过通道选择电路对四路回波进行循环检测;回波信号经多重反馈带通滤波放大电路和过零比较电路后,触发定时器的输入捕捉中断,微控制器存储回波往返时间,经过温度校正和运算后送所测最短距离进行显示并报警;经调试该仪器能满足1.5m范围内的距离测距要求,测量“盲区”小于20cm,具有高的精确度和可靠性;适当改进后可用于其它短距离测距要求的相关系统中。An ultrasonic distance measurement system for backing a car is designed.It is mainly designed with the adoption of the MCU MC68HC908GP32 together with other circuit module.The system detects circularly the four channels which is composed of four probes of transmitting and receiving the ultrasonic wave through select circuit.The reflected signal is disposed by the magnified circuit of multiple feedback band-pass filter and zero-crossing comparative circuit.When the MCU detects the reflecting wave,interrupting of timer would be triggered,and the trip-back time is saved in memory cell.The shortest distance operated through temperature correction is displayed and the system will alarm when the distance is less than the fixed parameters.After debugged,system can meet actual demand within 1.5 meter.The blind distance is less than 20cm and the system is of high precision and reliability.It can also be applied to other relative systems after properly improved

    大亚湾及周边海区潮流和余流的季节变化特征

    Get PDF
    通过对大亚湾及其周边海区冬、夏两季和大潮、小潮多站位的海流观测,分析了调查海区潮流、余流的分布特征和季节变化。结果显示:大亚湾及周边海区较小的潮差导致冬季和夏季整体实测海流较弱,夏季潮差和潮流略大于冬季。大潮期间部分站位表现出明显的潮流涨、落的特征,但小潮期间在余流和其他因素的掩盖下涨潮流和落潮流不明显。该海区潮流振幅最强的分潮为M2分潮,而K1、O1、S2分潮振幅较弱,所有站位的潮流性质基本上都表现为不正规半日潮流,大多数站位的潮流运动形式主要表现为往复流。冬季大亚湾湾内的余流虽然流速较弱,但余流的流向体现出的反气旋结构明显且稳定。大亚湾湾口和惠东以东沿岸海区的余流受季节和天气过程影响显著,夏季期间台风或其他因素造成的天气过程可以使余流整体转向。国家自然科学基金(41776027);;\n惠州市海洋渔业资源环境调查项目(F2017-01-1);;\n厦门大学校长基金(20720180103

    海域使用管理的若干问题探讨

    Get PDF
    文章对海域使用管理中遇到的若干问题进行探讨,包括海洋功能区划符合性判别、海域使用论证及用海确权、岸线认定、填海项目竣工海域使用验收等方面内容,以期为海域使用精细化管理提供参考依据。海洋公益性行业科研专项经费资助(200905004

    Drag reduction using riblets downstream of a high Reynolds number inclined forward step flow

    Get PDF
    Micro-riblet is an efficient passive method for controlling turbulent boundary layers, with the potential to reduce frictional drag. In various applications within the transportation industry, flow separation is a prevalent flow phenomenon. However, the precise drag reduction performance of riblets in the presence of flow separation remains unclear. To address this, an inclined forward step model is proposed to investigate the interaction between riblet and upstream flow separation. The large eddy simulation (LES) method is applied to simulate the flow over geometries with different step angles and riblet positions. The results show riblets still reduce wall frictional resistance when subjected to the upstream flow separation. Remarkably, as the angle of the step increases from 0 degrees to 30 degrees, the drag reduction experiences an increment from 9.5% to 12.6%. From a turbulence statistics standpoint, riblets act to suppress the Reynold stress in the near-wall region and dampen ejection motions, thus weakening momentum exchange. Quadrant analysis reveals that with the augmentation of flow separation, the Q2 motion within the flow field intensifies, subsequently enhancing the riblet-induced drag reduction. Moreover, the position of the rib lets has a significant impact on the pressure drag. Riblets close to the point of separation enhance flow separation, altering the surface pressure distribution and thus increasing the resistance. The results reveal that when the riblets are positioned approximately 160 riblet heights away from the step, their effect on the upstream flow separation becomes negligible. The precise performance of riblets under complex flow conditions is important for their practical engineering application

    重组毕赤酵母高密度发酵表达H5N1禽流感病毒糖蛋白

    Get PDF
    在10L发酵罐中,对高致病性禽流感病毒H5N1糖蛋白HA1在重组毕赤酵母中的表达发酵工艺进行了研究。通过分批补料培养方法探讨不同培养温度、诱导温度、补料方式、微量元素等因素对菌体的生长以及重组蛋白表达和活性的影响。结果表明,菌种培养和诱导温度均为25oC时,菌体的生长、分泌表达量和与广谱中和抗体的反应活性较好;微量元素是影响重组HA1蛋白生物活性的重要因素;通过优化高密度发酵工艺,H5N1病毒糖蛋白HA1在发酵罐中的表达量比摇瓶培养提高10.5倍,达到约120mg/L,为大规模制备高致病性禽流感病毒的HA1蛋白奠定了基础

    中国物理海洋学研究70年:发展历程、学术成就概览

    Get PDF
    本文概略评述新中国成立70年来物理海洋学各分支研究领域的发展历程和若干学术成就。中国物理海洋学研究起步于海浪、潮汐、近海环流与水团,以及以风暴潮为主的海洋气象灾害的研究。随着国力的增强,研究领域不断拓展,涌现了大量具有广泛影响力的研究成果,其中包括:提出了被国际广泛采用的"普遍风浪谱"和"涌浪谱",发展了第三代海浪数值模式;提出了"准调和分析方法"和"潮汐潮流永久预报"等潮汐潮流的分析和预报方法;发现并命名了"棉兰老潜流",揭示了东海黑潮的多核结构及其多尺度变异机理等,系统描述了太平洋西边界流系;提出了印度尼西亚贯穿流的南海分支(或称南海贯穿流);不断完善了中国近海陆架环流系统,在南海环流、黑潮及其分支、台湾暖流、闽浙沿岸流、黄海冷水团环流、黄海暖流、渤海环流,以及陆架波方面均取得了深刻的认识;从大气桥和海洋桥两个方面对太平洋–印度洋–大西洋洋际相互作用进行了系统的总结;发展了浅海水团的研究方法,基本摸清了中国近海水团的分布和消长特征与机制,在大洋和极地水团分布及运动研究方面也做出了重要贡献;阐明了南海中尺度涡的宏观特征和生成机制,揭示了中尺度涡的三维结构,定量评估了其全球物质与能量输运能力;基本摸清了中国近海海洋锋的空间分布和季节变化特征,提出了地形、正压不稳定和斜压不稳定等锋面动力学机制;构建了"南海内波潜标观测网",实现了对内波生成–演变–消亡全过程机理的系统认识;发展了湍流的剪切不稳定理论,提出了海流"边缘不稳定"的概念,开发了海洋湍流模式,提出了湍流混合参数化的新方法等;在海洋内部混合机制和能量来源方面取得了新的认识,并阐述了混合对海洋深层环流、营养物质输运等过程的影响;研发了全球浪–潮–流耦合模式,推出一系列海洋与气候模式;发展了可同化主要海洋观测数据的海洋数据同化系统和用于ENSO预报的耦合同化系统;建立了达到国际水准的非地转(水槽/水池)和地转(旋转平台)物理模型实验平台;发展了ENSO预报的误差分析方法,建立了海洋和气候系统年代际变化的理论体系,揭示了中深层海洋对全球气候变化的响应;初步建成了中国近海海洋观测网;持续开展南北极调查研究;建立了台风、风暴潮、巨浪和海啸的业务化预报系统,为中国气象减灾提供保障;突破了国外的海洋技术封锁,研发了万米水深的深水水听器和海洋光学特性系列测量仪器;建立了溢油、危险化学品漂移扩散等预测模型,为伴随海洋资源开发所带来的风险事故的应急处理和预警预报提供科学支撑。文中引用的大量学术成果文献(每位第一作者优选不超过3篇)显示,经过70年的发展,中国物理海洋学研究培养了一支实力雄厚的科研队伍,这是最宝贵的成果。这支队伍必将成为中国物理海洋学研究攀登新高峰的主力军

    Study on the University Freshmen's Mal-adaptation and Self-adjustment

    No full text
    大学新生在步入大学校园后,面对全新的生活环境和角色转换,常会产生各种适应不良情况。现阶段大学新生存在的适应问题表现在心理状态、发展目标、学习过程和生活方式四个纬度。有鉴于此,大学新生应从四个方面进行自我调适:心理状态实现由依赖变为独立,发展目标实现由高考应试转为能力培养,学习方式实现从被动转向主动,生活方式从他律转入自律。Mal-adaptation for university freshmen when facing new campus life is a hot issue currently.The psychological state,development goals,learning process and the way of life are the four main dimensions of mal-adaptation among freshmen.The corresponding self-adjustment may help freshmen adapt to the new environment and the role changed on campus.The following are the suggestions:the change of mental state from dependence to independence,the change development target from the college entrance examination to training ability,the change of learning from passive to initiative and the change of lifestyle from heteronomy to autonomy

    生物分子在Ni纳米膜表面吸附的力学特性:分子动力学模拟

    No full text
    采用COMPASS力场,通过分子动力学模拟,研究了Ni纳米薄膜的弹性模量的尺寸效应,以及生物分子吸附在Ni表面对其力学性能的影响.计算结果表明,随着厚度的增大,吸附强度也在增强;Ni纳米薄膜的弹性模量随着膜厚的减小而减小.氨基酸在Ni表面的吸附能够提高其弹性模量1~2 GPa,并且表明分子的取向是重要的影响因素
    corecore