Recycled Synthetic Polymer-Based Electrospun Membranes for Filtering Applications

Synthetic polymers have been widely applied in various commercial and household applications owing to their fascinating properties of low-cost, lightweight, and processability. However, increasing population and living standards and rising demand for non-biodegradable polymers have led to the accumulation of plastic pollution resulting in the current environmental crisis. Current waste management methods such as landfilling or incineration do not solve these environmental issues. On the other hand, recycling plastic waste is the most valuable strategy for dealing with waste as raw material for high-value products. One of such products is filter membranes. Polymer fiber membranes as masks in pandemics have been one of the most sought-after products in recent years. Some types of plastic waste became a material source for the development of filter materials, which could contribute to the protection of human health. Utilizing the simple, cheap, and industrially available technological solution is also needed. Given the number of advantages, electrospinning is such a beneficial solution. The electrospun polymer waste-based membranes show excellent filtration performance and can carry many other functionalities. Therefore, this review article presents a brief overview of electrospun nanofibrous membranes based on synthetic plastic waste and summarizes the filtration performance of such membranes. This review will discuss the future perspectives of electrospun membranes as well

Biodegradable active packaging enriched with essential oils for enhancing the shelf life of strawberries

The strawberry (Fragaria ananassa) is a nutrient-rich fruit with high content of healthbeneficial compounds. However, strawberries are susceptible to mechanical damage and microbiological contamination which can cause changes in fruit sensory properties. These changes consequently effect on ripening and shelf life of the strawberry. In recent years, essential oils (EOs) have been famous for their antimicrobial and antioxidant properties and are promising ecological alternatives to chemical antimicrobial substances. Nowadays, active packaging is one of several techniques developed for slowing down the metabolic processes of fresh fruits. Poly(lactic acid) (PLA) is one of the several polymers suitable for encapsulation EOs, whereas at the same time represent non-toxic, biodegradable, and compostable polymer derived from renewable resources. Suitable packaging prolongs the shelf life of fruit, keeps the products at the highest possible nutrition level, improves quality, and attracts customer attention. In the current study, we encapsulated EOs (lemongrass and oregano) into a PLA and poly(3-hydroxybutyrate) (PHB) packaging film and explored their antimicrobial and antioxidant properties. Moreover, biochemical and quality parameters for strawberry preservation and shelf-life extension were also assessed. Our tested active packaging film with EOs was proven to be useful for postharvest quality maintenance and shelf-life extension of strawberries, with PLA/PHB/ATBC + 5% lemongrass EO being slightly better than PLA/PHB/ATBC + 5% oregano EO.Project APVV-18-0420; Projects 2/0082/22 and 2/0137/23; European Regional Development Fund project: 313011V578info:eu-repo/semantics/publishedVersio

Circulatory Management of Polymer Waste: Recycling into Fine Fibers and Their Applications

In modern society, it is impossible to imagine life without polymeric materials. However, managing the waste composed of these materials is one of the most significant environmental issues confronting us in the present day. Recycling polymeric waste is the most important action currently available to reduce environmental impacts worldwide and is one of the most dynamic areas in industry today. Utilizing this waste could not only benefit the environment but also promote sustainable development and circular economy management. In its program statement, the European Union has committed to support the use of sorted polymeric waste. This study reviews recent attempts to recycle this waste and convert it by alternative technologies into fine, nano-, and microscale fibers using electrospinning, blowing, melt, or centrifugal spinning. This review provides information regarding applying reprocessed fine fibers in various areas and a concrete approach to mitigate the threat of pollution caused by polymeric materials

Electrospun Poly(ethylene Terephthalate)/Silk Fibroin Composite for Filtration Application

In this study, fibrous membranes from recycled-poly(ethylene terephthalate)/silk fibroin (r-PSF) were prepared by electrospinning for filtration applications. The effect of silk fibroin on morphology, fibers diameters, pores size, wettability, chemical structure, thermo-mechanical properties, filtration efficiency, filtration performance, and comfort properties such as air and water vapor permeability was investigated. The filtration efficiency (FE) and quality factor (Qf), which represents filtration performance, were calculated from penetration through the membranes using aerosol particles ranging from 120 nm to 2.46 μm. The fiber diameter influenced both FE and Qf. However, the basis weight of the membranes has an effect, especially on the FE. The prepared membranes were classified according to EN149, and the most effective was assigned to the class FFP1 and according to EN1822 to the class H13. The impact of silk fibroin on the air permeability was assessed. Furthermore, the antibacterial activity against bacteria S. aureus and E. coli and biocompatibility were evaluated. It is discussed that antibacterial activity depends not only on the type of used materials but also on fibrous membranes’ surface wettability. In vitro biocompatibility of the selected samples was studied, and it was proven to be of the non-cytotoxic effect of the keratinocytes (HaCaT) after 48 h of incubation

Diclofenac Embedded in Silk Fibroin Fibers as a Drug Delivery System

Silk fibroin is a biocompatible, non-toxic, mechanically robust protein, and it is commonly used and studied as a material for biomedical applications. Silk fibroin also gained particular interest as a drug carrier vehicle, and numerous silk formats have been investigated for this purpose. Herein, we have prepared electrospun nanofibers from pure silk fibroin and blended silk fibroin/casein, followed by the incorporation of an anti-inflammatory drug, diclofenac. Casein serves as an excipient in pharmaceutical products and has a positive effect on the gradual release of drugs. The characteristics of the investigated composites were estimated by scanning electron microscope, transmission electron microscope, thermogravimetric analysis, and a lifetime of diclofenac by electron paramagnetic resonance analysis. The cumulative release in vitro of diclofenac sodium salt, together with the antiproliferative effect of diclofenac sodium salt-loaded silk nanofibers against the growth of two cancer cell lines, are presented and discussed

Properties and Degradation of Novel Fully Biodegradable PLA/PHB Blends Filled with Keratin

The utilization of keratin waste in new materials formulations can prevent its environmental disposal problem. Here, novel composites based on biodegradable blends consisting of poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB), and filled with hydrolyzed keratin with loading from 1 to 20 wt % were prepared and their properties were investigated. Mechanical and viscoelastic properties were characterized by tensile test, dynamic mechanical thermal analysis (DMTA) and rheology measurements. The addition of acetyltributyl citrate (ATBC) significantly affected the mechanical properties of the materials. It was found that the filled PLA/PHB/ATBC composite at the highest keratin loading exhibited similar shear moduli compared to the un-plasticized blend as a result of the much stronger interactions between the keratin and polymer matrix compared to composites with lower keratin content. The differences in dynamic moduli for PLA/PHB/ATBC blend filled with keratin depended extensively on the keratin content while loss the factor values progressively decreased with keratin loading. Softening interactions between the keratin and polymer matrix resulted in lower glass transitions temperature and reduced polymer chain mobility. The addition of keratin did not affect the extent of degradation of the PLA/PHB blend during melt blending. Fast hydrolysis at 60 °C was observed for composites with all keratin loadings. The developed keratin-based composites possess properties comparable to commonly used thermoplastics applicable for example as packaging materials

Antibacterial filtration membranes based on PVDF-co-HFP nanofibers with the addition of medium-chain 1-monoacylglycerols

The efficiency of filtration membranes is substantially lowered by bacterial attachments and potential fouling processes, which reduce their durability and lifecycle. The antibacterial and antifouling properties exhibited by the added materials play a substantial role in their application. We tested a material poly(vinylidene fluoride)-co-hexafluoropropylene (PDVF-co-HFP) based on an electrospun copolymer, where an agent was incorporated with a small amount of ester of glycerol consecutively with caprylic, capric, and lauric acids. Each of these three materials differing in the esters (1-monoacylglycerol, 1-MAG) used was prepared with three weighted concentrations of 1-MAG (1, 2, and 3 wt %). The presence of 1-MAG with an amphiphilic structure resulted in the hydrophilic character of the prepared materials that contributed to the filtration performance. The tested materials (membranes) were characterized with rheological, optical (scanning electron microscopy, SEM), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and other methods to evaluate antibacterial and antifouling activities. The pure water flux was 6 times higher than that of the neat PVDF-co-HFP membrane when the added 1-MAG attained only 1 wt %. It was experimentally shown that the PVDF-co-HFP/1-MAG membrane with high wettability improved antibacterial activity and antifouling ability. This membrane is highly promising for water treatment due to the safety of antibacterial 1-MAG additives. © 2021 American Chemical Society.program INTER-EXCELLENCE, a subprogram of INTER-COST by the Ministry of Education, Youth and Sports CR [LTC19034]; Czech Academy of Sciences, Czech Republic [RVO: 67985874]; TACR [TJ04000226]; [VEGA 2/0168/21]; [APVV 18-0420]Technology Agency of the Czech Republic, TACR: TJ04000226; Ministerstvo Školství, Mládeže a Tělovýchovy, MŠMT: LTC19034; Akademie Věd České Republiky, AV ČR: 67985874; Vedecká Grantová Agentúra MŠVVaŠ SR a SAV, VEGA: 2/0168/21, APVV 18-042