303 research outputs found

    Türkiye'de reküren iskemik inme üzerine etkili risk faktörleri

    Get PDF
    Objectives: The aim of the study is to determine the risk factors for recurrent ischemic stroke. Patients and Methods: We compared the risk factors in 186 recurrent ischemic stroke patients (94 males, 92 females; mean age 66.85±11.21 years; range 20-95 years) with 300 first-ever stroke patients (control group) among 1150 ischemic stroke patients who had been treated in Neurology Department of Trakya University Medical Faculty over a period of three years. Results: The recurrence rate was 16.1%. Within the recurrent patients, 89.7% had hypertension, 32.3% had atrial fibrillation, 24.4% had diabetes mellitus, 15.6% had transient ischemic attack, and 57.5% had several types of heart diseases. The most frequent recurrence etiology was embolic according to TOAST criteria (35.5%). Transient ischemic attack (OR= 2.98; 95% CI 1.54-5.76), hypertension (OR= 1.96; 95% CI 1.11-2.64) and atrial fibrillation (OR= 1.74; 95% CI 1.44-2.66) were found as the independent risk factors. The mean of the modified Rankin scores of the study group at their last charge were significantly higher than that of the control group. Conclusion: Our findings emphasize the importance of the consistent anticoagulation therapy for patients with atrial fibrillation and close blood pressure control in patients with hypertension.Amaç: Bu çalışmada reküren iskemik inmede risk faktörleri belirlendi. Hastalar ve Yöntemler: Üç yıllık dönemde Trakya Üniversitesi Tıp Fakültesi Hastanesi Nöroloji Kliniği’ne başvuran toplam 1150 hasta içinden reküren inme geçiren 186 hasta (94 erkek, 92 kadın; ort. yaş 66.85±11.21; dağılım 20-95) ilk iskemik inmesini geçiren 300 hasta ile risk faktörleri açısından karşılaştırıldı. Bulgular: Reküren inme oranı %16.1 idi. Reküren inme grubunda hastaların %89.7’sinde hipertansiyon, %32.3’ünde atrial fibrilasyon, %24.4’ünde diabetes mellitus, %15.6’sında geçici iskemik atak ve %57.5’inde değişik kalp hastalıklarının olduğu gözlendi. Reküren inmenin en sık görülen etyolojik nedeni TOAST sınıflamasına göre kardiyoembolizmdi (%35.5). Geçici iskemik atak (OR= 2.98; %95 CI 1.54-5.76), hipertansiyon (OR= 1.96; %95 CI 1.11-2.64) ve atrial fibrilasyon (OR= 1.74; %95 CI 1.44-2.66) reküren inme için bağımsız risk faktörü olarak bulundu. Hasta grubu ile kontrol grubu modifiye Rankin skoru için karşılaştırıldığında hasta grubunda bu skorun daha kötü olduğu izlendi. Sonuç: Bizim bulgularımız hipertansif hastalarda kan basıncı kontrolünün, atriyal fibrilasyonlu hastalarda ise etkin antikoagülasyonun reküren inmeyi önlemede önemli olduğunu göstermiştir

    Minimal life “structures”: A studio experience

    Get PDF
    The necessity of the space to respond correctly to the user's wishes and needs is an unchanging phenomenon. Today, especially with the pandemic, differences in housing meaning are sought. With this current problem, minimal living spaces have been determined as the design studio subject of Ostim Technical University 2022-2023 Fall Semester. In this study, in the context of the suggestions developed by the students, the main motivation is to examine the meaning of the project designs and the residence; at the same time, it is aimed to discuss this studio experience. Within the scope of this study, the method, process, and end products of the studio are discussed. In this study, the changing meaning of the house and minimal living spaces were questioned by using the "document review" method, one of the qualitative research methods. The information obtained was analyzed by evaluating the results of the studio course. With this study, in which studio products with different user types and different functions are examined, it is concluded that the design of living spaces in small houses is very important for healthier solutions in comfort conditions, and it has been a very developing experience for the studio participants and executives

    Drying of Drilling Sludge: Conventional and Microwave Drying

    Get PDF
    Drilling sludge (DS) is one of the most important waste generated during drilling activitiesand management of drilling sludge (DS) is highly complicated because of its highmoisture content, complex constituents and chemical characteristics. Treatment, transportationand disposal costs of DS are important issues about the management of DS.Restrictive environmental legislation has led to the optimization of solid–liquid separation.Drying process can be defined as an effective solution to reduce sludge mass and thus toreduce management cost.In this study, conventional and microwave drying of DS were compared in terms ofprocess efficiency. Microwave power levels, drying temperature, drying times, moisturecontent of the DS and energy consumption of drying processes were defined as controlparameters. Microwave power levels of 120 and 700 W and 60 and 80 oC were performedto dry the DS sample for microwave and conventional drying, respectively. The resultsshowed that the microwave drying was more effective than conventional method in theview of drying times and energy consumption

    Effect of Saliva Contamination on Microleakage of Open Sandwich Restorations

    Get PDF
    Svrha istraživanja: Željela se procijeniti mikropropusnost konvencionalnih staklenih ionomera, smolom modificiranih staklenih ionomera i hibridnih staklenih ionomera u otvorenim restauracijama II. razreda kontaminiranih slinom ili nekontamitiranih slinom. Materijal i metode: Korišteno je 60 ekstrahiranih zdravih ljudskih kutnjaka i preparirano je 120 kaviteta II. razreda na mezijalnim i distalnim plohama. Rubovi gingive nalazili su se 1 mm ispod caklinsko-cementnog spojišta. Svi uzorci nasumično su podijeljeni u četiri skupine (n = 15): skupina I – visoko viskozni stakleni ionomer (Fuji IX GP); skupina II – smolom modificirani stakleni ionomer (Fuji II LC); skupina III – hibridni stakleni ionomer (Equia-fil Forte); skupina IV – kompozitna smola (G’aenial Posterior). U skupini s otvorenim sen-dvič-restauracijama staklenoionomerni materijali postavljeni su na gingivno dno u debljini od 1 mm, a ostatak kaviteta ispunjen je kompozitnim materijalom. Nakon izrade restauracije na mezijalnim plohama, distalni kaviteti restaurirani su prema istom protokolu nakon kontaminacije slinom. Uzorci su podvrgnuti termocikliranju od 10 000 ciklusa na temperaturi od 5 °C do 55 °C i uronjeni tijekom 24 sata u otopinu metilenskog modrila (% 0,5). Zatim su se prerezani dijamantnom pilom, uz vodeno hlađenje, vertikalno kroz središte restauracije od mezijalne plohe prema distalnoj na debljinu od 1 mm. Nakon toga je prodiranje boje procjenjivano softverom za analizu slika. Podatci su statistički analizirani (p 0,05). Uz to, nije bilo statistički značajne razlike između skupina kontaminiranih slinom i nekontaminiranih slinom, neovisno o testiranim dentalnim materijalima (p > 0,05). Zaključak: Uzimajući u obzir ograničenja ovog istraživanja, u otvorenim sendvič-restauracijama kontaminacija slinom nije štetno utjecala na mikropropuštanje, bez obzira na testirane dentalne materijale. Hibridni stakleni ionomeri i stakleni ionomeri modificirani smolom pokazali su lošije rezultate u mikropropusnosti na gingivnim rubovima u odnosu prema visokoviskoznim staklenoionomernim materijaloma u skupini bez kontaminacije.Objectives: The purpose of the present study was to evaluate the microleakage of conventional glass-ionomer, resin modified glass-ionomer and glass hybrid ionomer Class II open sandwich restorations with or without saliva contamination. Material and methods: Sixty extracted sound human molar teeth were used and 120 class II slot cavities were prepared in mesial and distal surfaces. The gingival margins were located 1 mm below the cementoenamel junction. All specimens were randomly divided in 4 groups (n=15): Group I: High-Viscous Glass Ionomer (Fuji IX GP) Group II: Resin Modified Glass Ion-omer (Fuji II LC) Group III: Glass Hybrid Ionomer (Equia-fil Forte), Group IV: Composite Resin (G’aenial Posterior). In open sandwich restoration groups, glass ionomer materials were placed to gingival floor in 1 mm thickness and rest of the cavity was filled with resin composite. After the restorations in mesial surfaces had been performed, distal cavities were restored with the same protocol after saliva contamination. The specimens were thermocycled for 10000 cycles at 5 0 C to 55 0 C and immersed in methylene blue dye solution (% 0,5) for 24 hours. Then, they were sectioned vertically through the center of the restorations from mesial to distal surface with a water-cooled diamond saw with 1mm thickness. Subsequently, the dye penetration was evaluated with image analysis software. Data were statistically analyzed (p0.05). Additionally, there was not a statistically significant difference between the no contamination and saliva contaminated groups regardless of dental materials tested (p>0.05). Conclusion: Within the limitations of this study, in open sandwich restorations, saliva contamination did not show an adverse effect on microleakage irrespective of dental materials tested. Glass hybrid ionomers and resin modified glass ionomers showed lower microleakage scores in gingival margins compared to high-viscous glass ionomer material in no contamination groups

    One-pot synthesis of oxazolidinones and five-membered cyclic carbonates from epoxides and chlorosulfonyl isocyanate: theoretical evidence for an asynchronous concerted pathway

    Get PDF
    The one-pot reaction of chlorosulfonyl isocyanate (CSI) with epoxides having phenyl, benzyl and fused cyclic alkyl groups in different solvents under mild reaction conditions without additives and catalysts was studied. Oxazolidinones and five-membered cyclic carbonates were obtained in ratios close to 1:1 in the cyclization reactions. The best yields of these compounds were obtained in dichloromethane (DCM). Together with 16 known compounds, two novel oxazolidinone derivatives and two novel cyclic carbonates were synthesized with an efficient and straightforward method. Compared to the existing methods, the synthetic approach presented here provides the following distinct advantageous: being a one- pot reaction with metal-free reagent, having shorter reaction times, good yields and a very simple purification method. Moreover, using the density functional theory (DFT) method at the M06-2X/6-31+G(d,p) level of theory the mechanism of the cycloaddition reactions has been elucidated. The further investigation of the potential energy surfaces associated with two possible channels leading to oxazolidinones and five-membered cyclic carbonates disclosed that the cycloaddition reaction proceeds via an asynchronous concerted mechanism in gas phase and in DCM

    Pigeon in Konya province folklore: 1. diseases and their treatments

    Get PDF
    Bu çalışma ile Konya ili güvercin yetiştiriciliğinde hastalıklar ve tedavilerine yönelik folklorik niteliği olan sözlü, yazılı ve görsel verilerin literatüre kazandırılarak Türk kültür mirasına katkı sağlanması ve veteriner bilimleri alanı çalışmalarına ışık tutulması amaçlandı. Çalışmanın materyalini, çeşitli kaynaklardan yararlanılarak konuya özel olarak hazırlanan “Bilgi Derleme Formu” aracılığıyla Konya ilinde güvercin yetiştiricilerinden oluşan 28 kaynak kişiden elde edilen bilgiler oluşturdu. Çalışmanın bulguları dış ve iç hastalıklar, paraziter hastalıklar ve salgın hastalıklar başlıkları altında verildi. Çalışmanın verilerinin, gerçekleştirilen literatür taramaları ile elde edilen verilere benzerlik gösterdiği, örneğin; “mantarlı bölgeye yağ sürülmesi, siğil olan derinin bıçak ile kesilmesi” gibi uygulamalar Konya ili folklorik veteriner hekimliğinde yer etmiş rasyonel yöntemler, “felçli güvercinin paçalarının yolunarak, kafa ve paçalarına kesik atılması” gibi uygulamalar ise ampirik tedavi yöntemleri olarak belirlendi. Konya ilinde gerçekleştirilen folklorik nitelikli bu çalışmada uygulanan bazı yöntemlerin bilimsel veriler ile genel olarak uyumlu ve rasyonel olduğu, ancak halk kültüründe varlığını koruyan bir takım ampirik yöntemlerin de halen varlığını devam ettirdiği ve güvercin hastalıkları ve tedavilerine yönelik veteriner bilimleri açısından araştırılmaya muhtaç alanlar olduğu söylenebilir.With this study, it was aimed to bring verbal, written and visual data, which have folkloric characteristics for diseases and treatments of pigeon breeding in Konya into the literatüre, and contribute to the Turkish cultural heritage and to shed light on veterinary science studies. The material of the study was composed of the information obtained from 28 sources, consisting of pigeon breeders in Konya, through the “Information Collection Form”. The findings of the study were given under the headlines of external and internal diseases, parasitic diseases and epidemics. It was determined that, the data of the study shows similarities to the data obtained through the literature reviews; For example; “applying oil to the trichophytic area, cutting the papilloma skin with the help of a knife” were determined as rational methods, and “removing the leg feathers of the paralyzed pigeon and making cuts in the head and legs” were determined as empirical methods. It can be said that some methods applied in this study carried out in Konya are generally compatible with scientific data and rational, but some empirical methods still exist in folk culture, and there are areas in need of research in terms of veterinary science for pigeon diseases and treatments

    Pigeon in Konya province folklore: 2. breeding

    Get PDF
    Bu çalışmada, Konya ili güvercin yetiştiriciliğine yönelik folklorik niteliği olan sözlü, yazılı ve görsel verilerin literatüre kazandırılarak Türk folkloruna katkı sağlanması amaçlandı. Çalışmanın materyalini, “Bilgi Derleme Formu” aracılığıyla Konya ilinde güvercin yetiştiricilerinden oluşan 28 kaynak kişiden elde edilen bilgiler oluşturdu. Çalışmanın bulguları güvercinlerde barınma ve bakım, besleme ve üreme başlıkları altında verildi. Çalışma verilerinin, gerçekleştirilen literatür taramaları ile elde edilen verilere benzerlik gösterdiği, “badanas”, “guğurmak”, “toslamak”, “cılk”, “damarlı”, “hamurlama” ve “tüleme” kelimelerinin Konya’da hala aynı anlamlarda kullanıldığı ve bazı yetiştirme uygulamalarının rasyonel nitelik taşıdığı belirlendi. Sonuç olarak, çalışmada elde edilen folklorik bilgilerin bilimsel veriler ile genel olarak uyumlu ve rasyonel nitelik taşıdığı söylenebilir.In this study, it was aimed to verbal, written and visual data, which are folkloric characteristics of pigeon breeding in Konya, by bringing it into the literature and contribute to the Turkish folklore. The material of the study was composed of the information obtained from 28 source persons, consisting of pigeon breeders in Konya province, through the “Information Collection Form”. The findings of the study are given under the headings of sheltering and care, feeding and breeding. It was determined that, the data of the study are similar to the data obtained through the literature reviews, the words “badanas”, “guğurmak”, “toslamak”, “cılk”, “damarlı”, “hamurlama” and “tüleme” are still used in Konya with the same meanings and some of the breeding practices were rational. As a result, it can be said that the folkloric information obtained in the study is generally compatible and rational with scientific data

    Sınıf V Kavitelerde Kendinden Bağlanabilen Akışkan Kompozitlerin Mikrosızıntılarının Karşılaştırılması

    Get PDF
    Amaç: Bu in vitro çalışmanın amacı; sınıf V kavitelere uygulanan kendinden bağlanabilen akışkan kompozitler ile üç farklı adeziv sistemle (etch & rinse, iki aşamalı self-etch ve tek aşamalı self-etch) birlikte uygulanan akışkan kompozitlerin mikrosızıntı değerlerinin karşılaştırılmasıdır.Gereç-Yöntem: Çürüksüz insan molar dişlerinin bukkal ve lingual/palatinal yüzeylerinde yetmiş beş adet standart sınıf V kavite hazırlandı. Kavitelerin oklüzal kenarları minede gingival kenarları dişeti kenarından mine-sement birleşiminin 1 mm altında olacak şekilde yer aldı. Preperasyonu tamamlanan örnekler, rastgele 5 alt gruba ayrıldı: (1) self-adeziv [Fusio Liquid Dentin (FLD)], (2) self-adeziv [Vertise Flow (VF)], (3) adeziv (etch & rinse) [Gel Etchant/Optibond FL/Clearfil Majesty Flowable] (3ER-AK), (4) adeziv (iki aşamalı self-etch) [Clearfil SE Bond/Clearfil Majesty Flowable] (2SE-AK), (5) adeziv (tek aşama self-etch) [Clearfil S3 Bond Plus/Clearfil Majesty Flowable] (1SE-AK). Termal siklüs ve %0.5’lik bazik fuksin boya uygulamasından sonra, örneklerden kesitler alındı ve stereomikroskop altında boya penetrasyon dereceleri skorlandı (n=30). Sonuçlar istatiksel olarak Kruskal-Wallis, Mann-Whitney U ve Wilcoxon Signed Ranks testleri uygulanarak değerlendirildi.Bulgular: Kavitelerin mine yüzeyinde; VF, FLD, 3ER-AK grupları arasında istatistiksel olarak anlamlı bir fark göstermezken, 2SE-AK ve 1SE-AK grupları istatistiksel olarak anlamlı derecede daha yüksek mikrosızıntı değerleri gösterdi (p < 0.05). Kavitelerin dentin yüzeyinde ise 3ER-AK ve 2SE-AK grupları, VF, FLD ve 1SE-AK gruplarından istatistiksel olarak anlamlı derecede düşük mikrosızıntı değerleri gösterdi (p< 0.05). 2SE-AK ve 1SE-AK grupları mine yüzeyinde daha yüksek mikrosızıntı değerleri gösterirken, VF ve FLD grupları dentin yüzeyinde daha fazla mikrosızıntı değeri gösterdi (p<0.05).Sonuç: Kendiden bağlanabilen akışkan kompozitlerin her ikisi de mine yüzeyinde etch & rinse adeziv/akışkan kompozitle benzer mikrosızıntı değerleri göstermiştir. Dentin yüzeyinde ise kendiden bağlanabilen akışkan kompozitler, etch & rinse adeziv/akışkan kompozit ve iki aşamalı self-etch adeziv/akışkan kompozit gruplarına göre daha fazla mikrosızıntı oluşturmuştur

    Supporting novice mathematics teachers: The impact of an e- mentoring and video-based professional development program on teachers? noticing skills

    Get PDF
    Karadeniz Technical University Scientific Research Foundation [7178]The study was supported by Karadeniz Technical University Scientific Research Foundation with the project number 7178.This paper focuses on e-mentoring of novice mathematics teachers as professional development, and reports findings of the e-mentoring practices enriched with videos to improve noticing skills of novice teachers. A single group pre- and post-test study was conducted with the participation of 17 mentees, novice middle school mathematics teachers. Participants' noticing skills were assessed through a whole-class teaching video shown to them before and after the intervention. The responses of the teachers to the video assessment were analyzed considering attending, interpreting and decision-making dimensions of noticing. The results revealed that the ementoring program improved the novice mathematics teachers' noticing skills significantly in all dimensions.WOS:000978797700007Emerging Sources Citation IndexarticleUluslararası işbirliği ile yapılmayan - HAYIRMayıs2023YÖK - 2022-2
    corecore