26,723 research outputs found
Evaluation of the onset time and intubation conditions of rocuronium bromide in children
Publisher's copy made available with the permission of the publisher © 1997 Australian Society of AnaesthetistsWe have assessed, in children aged three to eight years, the intubating conditions after administration of rocuronium 0.6 mg/kg at 50 or 60 seconds, in groups of 15 patients. Intubating conditions were excellent in 11, good in 3 and fair in 1 patient at 50 seconds and excellent in 12 and good in 3 patients at 60 seconds. The mean onset time, for all patients, to when the first twitch of the train of four (T1), measured at the adductor pollicis, was depressed to less than 30% and 5% of control was 50 (SD 11.4) seconds and 94 (SD 31.7) seconds respectively. Depression of T1 to less than 30% of control, measured at the adductor pollicis in children, appears to indicate that intubating conditions will be clinically acceptable when using rocuronium.P.F. McDonald, D.A. Sainsbury, R.J. Lain
Development of a three-dimensional turbulent duct flow analysis
A method for computing three-dimensional turbulent subsonic flow in curved ducts is described. An approximate set of governing equations is given for viscous flows which have a primary flow direction. The derivation is coordinate invariant, and the resulting equations are expressed in terms of tensors. General tube-like coordinates were developed for a general class of geometries applicable to many internal flow problems. The coordinates are then particularized to pipes having superelliptic cross sections whose shape can vary continuously between a circle and a near rectangle. The analysis is applied to a series of relevant aerodynamic problems including transition from nearly square to round pipes and flow through a pipe with an S-shaped bend
Same traits, different variance : Item-Level Variation Within Personality Measures
© 2014 the Author(s). This article has been published under the terms of the Creative Commons Attribution License. Without requesting permission from the Author or SAGE, you may further copy, distribute, transmit, and adapt the article, with the condition that the Author and SAGE Open are in each case credited as the source of the article. The version of record, Jamie S. Churcyard, Karen J. Pine, Shivani Sharma, Ben (C) Fletcher, ' Same Traits, Difference Variance: Item-Level Variation Within Personality Measures', SAGE Open, 2014, is available online via doi: 10.1177/2158244014522634Personality trait questionnaires are regularly used in individual differences research to examine personality scores between participants, although trait researchers tend to place little value on intra-individual variation in item ratings within a measured trait. The few studies that examine variability indices have not considered how they are related to a selection of psychological outcomes, so we recruited 160 participants (age M = 24.16, SD = 9.54) who completed the IPIP-HEXACO personality questionnaire and several outcome measures. Heterogenous within-subject differences in item ratings were found for every trait/facet measured, with measurement error that remained stable across the questionnaire. Within-subject standard deviations, calculated as measures of individual variation in specific item ratings within a trait/facet, were related to outcomes including life satisfaction and depression. This suggests these indices represent valid constructs of variability, and that researchers administering behavior statement trait questionnaires with outcome measures should also apply item-level variability indices.Peer reviewedFinal Published versio
Turbofan forced mixer-nozzle internal flowfield. Volume 3: A computer code for 3-D mixing in axisymmetric nozzles
A finite difference method is developed for making detailed predictions of three dimensional subsonic turbulent flow in turbofan lobe mixers. The governing equations are solved by a forward-marching solution procedure which corrects an inviscid potential flow solution for viscous and thermal effects, secondary flows, total pressure distortion and losses, internal flow blockage and pressure drop. Test calculations for a turbulent coaxial jet flow verify that the turbulence model performs satisfactorily for this relatively simple flow. Lobe mixer flows are presented for two geometries typical of current mixer design. These calculations included both hot and cold flow conditions, and both matched and mismatched Mach number and total pressure in the fan and turbine streams
Prolonging thermal barrier coated specimen life by thermal cycle management
Measurements were made of the rate of increase in temperature of a ZrO2-8Y2O3 thermal barrier coated (TBC) specimen for various values of fuel/air (F/A) ratios when the specimen is exposed to a 0.3 Mach burner flame. For rod specimens in a carousel, the heating rates increased with (F/A) ratio and were higher at the inward facing surface for a given (F/A). Plate specimens were more sensitive to burner variations. Calculated results are given for the radial stress in the coated rod specimens for variations in (F/A) ratios from 0.04 to 0.065. Over this range, the radial stress varies from 4.3 to 5.3 MPa. The results indicate that controlling the heating rate of a TBC by controlling the (F/A) ratio offers a potential method to prolong TBC cyclic life; uncontrolled (F/A) ratios will produce scatter in experimental results. Geometric arrangement can have an equivalent effect, but is usually fixed by design
The Kids are Alt-Right: A Review of Authoritarian Attitudes in Young Adults
The aim of this literature review will attempt to identify and establish a series of research avenues from the existing publications related to the study of authoritarianism that could be used to prepare the reader and researchers to identify the causal pathways that have led to the resurgence of latent racist attitudes among young white men in recent years. The first section of this paper will explore the historical origins of the study of authoritarian personality types through the work of Adorno, while paying close attention to the development of authoritarian attitudes rooted in early childhood experiences. The second section of this review will examine the evolution of the study of authoritarian personality types, and the newly established measures of right-wing authoritarianism and social dominance orientation crafted by Altemeyer, along with Sidanius and Pratto. This section will closely examine recent discoveries that have connected the central tenets of RWA and SDO to racial prejudice and anti-egalitarian attitudes, and how a combination of these measures can be reliably operationalized for the purposes of identifying authoritarian attitudes among young men today. The third portion of this review will explore the role of racialization in American policy decision-making, and the overlap between racist attitudes, RWA and SDO through the works of Huddy and Feldman, Tesler, and Hetherington and Weiler
Prediction of laminar and turbulent primary and secondary flows in strongly curved ducts
The analysis is based on a primary secondary velocity decomposition in a given coordinate system, and leads to approximate governing equations which correct an a priori inviscid solution for viscous effects, secondary flows, total pressure distortion, heat transfer, and internal flow blockage and losses. Solution of the correction equations is accomplished as an initial value problem in space using an implicit forward marching technique. The overall solution procedure requires significantly less computational effort than Navier-Stokes algorithms. The solution procedure is effective even with the extreme local mesh resolution which is necessary to solve near wall sublayer regions in turbulent flow calculations. Computed solutions for both laminar and turbulent flow compared very favorably with available analytical and experimental results. The overall method appears very promising as an economical procedure for making detailed predictions of viscous primary and secondary flows in highly curved passages
Development of a three-dimensional supersonic inlet flow analysis
A method for computing three dimensional flow in supersonic inlets is described. An approximate set of governing equations is given for viscous flows which have a primary flow direction. The governing equations are written in general orthogonal coordinates. These equations are modified in the subsonic region of the flow to prevent the phenomenon of branching. Results are presented for the two sample cases: a Mach number equals 2.5 flow in a square duct, and a Mach number equals 3.0 flow in a research jet engine inlet. In the latter case the computed results are compared with the experimental data. A users' manual is included
- …