Acoustical evaluation of the NASA Langley full-scale wind tunnel

Determining types of acoustical measurements suitable for test section of NASA Langley wind tunne

Noise Impacts from Professional Dog Grooming Forced-Air Dryers

This study was designed to measure the sound output of four commonly used brands of forced-air dryers used by dog groomers in the United States. Many dog groomers have questions about the effect of this exposure on their hearing, as well as on the hearing of the dogs that are being groomed. Readings taken from each dryer at 1 meter (the likely distance of the dryer from the groomer and the dog) showed average levels ranging from 105.5 to 108.3 dB SPL or 94.8 to 108.0 dBA. Using the 90 dBA criterion required by the US Occupational Safety and Health Administration, dog groomers/bathers are at risk if exposure to the lowest intensity dryer (94.8 dBA) exceeds 4 hours per day. If the more stringent 85 dBA criterion and 3 dB tradeoff is applied, less than one hour of exposure is permissible in an 8 hour day. Cautions are recommended for any persons exposed to noise from forced-air dryers

Remote sensing operations (multispectral scanner and photographic) in the New York Bight, 22 September 1975

Ocean dumping of waste materials is a significant environmental concern in the New York Bight. One of these waste materials, sewage sludge, was monitored in an experiment conducted in the New York Bight on September 22, 1975. Remote sensing over controlled sewage sludge dumping included an 11-band multispectral scanner, fiver multispectral cameras and one mapping camera. Concurrent in situ water samples were taken and acoustical measurements were made of the sewage sludge plumes. Data were obtained for sewage sludge plumes resulting from line (moving barge) and spot (stationary barge) dumps. Multiple aircraft overpasses were made to evaluate temporal effects on the plume signature

Acoustical Evaluation of the NASA Langley V/STOL Wind Tunnel

The results are presented of the acoustical measurements made to supply NASA Langley operating personnel with the acoustical characteristics of the tunnel test section needed for the planning of acoustical measurements and to identify the major noise sources. The results of the preliminary measurements of the spatial distribution of the sound field in the closed tunnel configuration indicate that the total sound power output of an unknown sound source placed in the test section could most probably be evaluated by measuring the sound pressure in two properly chosen locations in the duct - one upstream and one downstream of the test section. However, it is recommended that the practicability of this method of sound power output measurements be further investigated, preferably in a small scale model of the V/STOL Tunnel

3D ear shape as an estimator of hrtf notch frequency

This paper makes use of a new dataset of Head-Related Transfer Functions (HRTFs) containing high resolution median-plane acoustical measurements of a KEMAR mannequin with 20 different left pinna models as well as 3D scans of the same pinna models. This allows for an investigation of the relationship between 3D ear features and the first pinna notch present in the HRTFs, with the final aim of developing an accurate and handy procedure for predicting the individual HRTF from non-acoustical measurements. We propose a method that takes the 3D pinna mesh and generates a dataset of depth maps of the pinna viewed from various median-plane elevation angles, each having an associated pinna notch frequency value as identified in the HRTF measurements. A multiple linear regression model is then fit to the depth maps, aiming to predict the corresponding first pinna notch. The results of the regression model show moderate improvement to similar previous work built on global and elevation-dependent anthropometric pinna features extracted from 2D images

Meteorological effects on long-range outdoor sound propagation

Measurements of sound propagation over distances up to 1000 m were carried out with an impulse sound source offering reproducible, short time signals. Temperature and wind speed at several heights were monitored simultaneously; the meteorological data are used to determine the sound speed gradients according to the Monin-Obukhov similarity theory. The sound speed profile is compared to a corresponding prediction, gained through the measured travel time difference between direct and ground reflected pulse (which depends on the sound speed gradient). Positive sound speed gradients cause bending of the sound rays towards the ground yielding enhanced sound pressure levels. The measured meteorological effects on sound propagation are discussed and illustrated by ray tracing methods