Center for Aeronautics and Space Information Sciences

This report summarizes the research done during 1991/92 under the Center for Aeronautics and Space Information Science (CASIS) program. The topics covered are computer architecture, networking, and neural nets

Fault and Defect Tolerant Computer Architectures: Reliable Computing With Unreliable Devices

This research addresses design of a reliable computer from unreliable device technologies. A system architecture is developed for a fault and defect tolerant (FDT) computer. Trade-offs between different techniques are studied and yield and hardware cost models are developed. Fault and defect tolerant designs are created for the processor and the cache memory. Simulation results for the content-addressable memory (CAM)-based cache show 90% yield with device failure probabilities of 3 x 10(-6), three orders of magnitude better than non fault tolerant caches of the same size. The entire processor achieves 70% yield with device failure probabilities exceeding 10(-6). The required hardware redundancy is approximately 15 times that of a non-fault tolerant design. While larger than current FT designs, this architecture allows the use of devices much more likely to fail than silicon CMOS. As part of model development, an improved model is derived for NAND Multiplexing. The model is the first accurate model for small and medium amounts of redundancy. Previous models are extended to account for dependence between the inputs and produce more accurate results

Modeling and optimization of high-performance many-core systems for energy-efficient and reliable computing

Thesis (Ph.D.)--Boston UniversityMany-core systems, ranging from small-scale many-core processors to large-scale high performance computing (HPC) data centers, have become the main trend in computing system design owing to their potential to deliver higher throughput per watt. However, power densities and temperatures increase following the growth in the performance capacity, and bring major challenges in energy efficiency, cooling costs, and reliability. These challenges require a joint assessment of performance, power, and temperature tradeoffs as well as the design of runtime optimization techniques that monitor and manage the interplay among them. This thesis proposes novel modeling and runtime management techniques that evaluate and optimize the performance, energy, and reliability of many-core systems. We first address the energy and thermal challenges in 3D-stacked many-core processors. 3D processors with stacked DRAM have the potential to dramatically improve performance owing to lower memory access latency and higher bandwidth. However, the performance increase may cause 3D systems to exceed the power budgets or create thermal hot spots. In order to provide an accurate analysis and enable the design of efficient management policies, this thesis introduces a simulation framework to jointly analyze performance, power, and temperature for 3D systems. We then propose a runtime optimization policy that maximizes the system performance by characterizing the application behavior and predicting the operating points that satisfy the power and thermal constraints. Our policy reduces the energy-delay product (EDP) by up to 61.9% compared to existing strategies. Performance, cooling energy, and reliability are also critical aspects in HPC data centers. In addition to causing reliability degradation, high temperatures increase the required cooling energy. Communication cost, on the other hand, has a significant impact on system performance in HPC data centers. This thesis proposes a topology-aware technique that maximizes system reliability by selecting between workload clustering and balancing. Our policy improves the system reliability by up to 123.3% compared to existing temperature balancing approaches. We also introduce a job allocation methodology to simultaneously optimize the communication cost and the cooling energy in a data center. Our policy reduces the cooling cost by 40% compared to cooling-aware and performance-aware policies, while achieving comparable performance to performance-aware policy

Joint Hardware-Software Leakage Minimization Approach for the Register File of VLIW Embedded Architectures

New applications demand very high processing power when run on embedded systems. Very Long Instruction Word (VLIW) architectures have emerged as a promising alternative to provide such processing capabilities under the given energy budget. However, in this new VLIW-based architectures, the register file is a very critical contributor to the overall power consumption and new approaches have to be proposed to reduce its power while preserving system performance. In this paper, we propose a novel joint hardware–software approach that reduces the leakage energy in the register files of these embedded VLIW architectures. This approach relies upon an energy-aware register assignment method and a hardware support that creates sub-banks in the global register file that can be switched on/off at run time. Our results indicate energy savings in the register file, after considering the overhead of the added extra hardware, up to 50% for modern multimedia embedded applications without performance degradation. We illustrate this approach using real-life applications running on these processors. We also illustrate the tradeoff between the area overhead vs. the gains in the leakage energy for the different strategies

Exploring Processor and Memory Architectures for Multimedia

Multimedia has become one of the cornerstones of our 21st century society and, when combined with mobility, has enabled a tremendous evolution of our society. However, joining these two concepts introduces many technical challenges. These range from having sufficient performance for handling multimedia content to having the battery stamina for acceptable mobile usage. When taking a projection of where we are heading, we see these issues becoming ever more challenging by increased mobility as well as advancements in multimedia content, such as introduction of stereoscopic 3D and augmented reality. The increased performance needs for handling multimedia come not only from an ongoing step-up in resolution going from QVGA (320x240) to Full HD (1920x1080) a 27x increase in less than half a decade. On top of this, there is also codec evolution (MPEG-2 to H.264 AVC) that adds to the computational load increase. To meet these performance challenges there has been processing and memory architecture advances (SIMD, out-of-order superscalarity, multicore processing and heterogeneous multilevel memories) in the mobile domain, in conjunction with ever increasing operating frequencies (200MHz to 2GHz) and on-chip memory sizes (128KB to 2-3MB). At the same time there is an increase in requirements for mobility, placing higher demands on battery-powered systems despite the steady increase in battery capacity (500 to 2000mAh). This leaves negative net result in-terms of battery capacity versus performance advances. In order to make optimal use of these architectural advances and to meet the power limitations in mobile systems, there is a need for taking an overall approach on how to best utilize these systems. The right trade-off between performance and power is crucial. On top of these constraints, the flexibility aspects of the system need to be addressed. All this makes it very important to reach the right architectural balance in the system. The first goal for this thesis is to examine multimedia applications and propose a flexible solution that can meet the architectural requirements in a mobile system. Secondly, propose an automated methodology of optimally mapping multimedia data and instructions to a heterogeneous multilevel memory subsystem. The proposed methodology uses constraint programming for solving a multidimensional optimization problem. Results from this work indicate that using today’s most advanced mobile processor technology together with a multi-level heterogeneous on-chip memory subsystem can meet the performance requirements for handling multimedia. By utilizing the automated optimal memory mapping method presented in this thesis lower total power consumption can be achieved, whilst performance for multimedia applications is improved, by employing enhanced memory management. This is achieved through reduced external accesses and better reuse of memory objects. This automatic method shows high accuracy, up to 90%, for predicting multimedia memory accesses for a given architecture

DeSyRe: on-Demand System Reliability

The DeSyRe project builds on-demand adaptive and reliable Systems-on-Chips (SoCs). As fabrication technology scales down, chips are becoming less reliable, thereby incurring increased power and performance costs for fault tolerance. To make matters worse, power density is becoming a significant limiting factor in SoC design, in general. In the face of such changes in the technological landscape, current solutions for fault tolerance are expected to introduce excessive overheads in future systems. Moreover, attempting to design and manufacture a totally defect and fault-free system, would impact heavily, even prohibitively, the design, manufacturing, and testing costs, as well as the system performance and power consumption. In this context, DeSyRe delivers a new generation of systems that are reliable by design at well-balanced power, performance, and design costs. In our attempt to reduce the overheads of fault-tolerance, only a small fraction of the chip is built to be fault-free. This fault-free part is then employed to manage the remaining fault-prone resources of the SoC. The DeSyRe framework is applied to two medical systems with high safety requirements (measured using the IEC 61508 functional safety standard) and tight power and performance constraints

Dynamic Systolization for Developing Multiprocessor Supercomputers

A dynamic network approach is introduced for developing reconfigurable, systolic arrays or wavefront processors; This allows one to design very powerful and flexible processors to be used in a general-purpose, reconfigurable, and fault-tolerant, multiprocessor computer system. The concepts of macro-dataflow and multitasking can be integrated to handle variable-resolution granularities in computationally intensive algorithms. A multiprocessor architecture, Remps, is proposed based on these design methodologies. The Remps architecture is generalized from the Cedar, HEP, Cray X- MP, Trac, NYU ultracomputer, S-l, Pumps, Chip, and SAM projects. Our goal is to provide a multiprocessor research model for developing design methodologies, multiprocessing and multitasking supports, dynamic systolic/wavefront array processors, interconnection networks, reconfiguration techniques, and performance analysis tools. These system design and operational techniques should be useful to those who are developing or evaluating multiprocessor supercomputers

Computing with Spintronics: Circuits and architectures

This thesis makes the following contributions towards the design of computing platforms with spintronic devices. 1) It explores the use of spintronic memories in the design of a domain-specific processor for an emerging class of data-intensive applications, namely recognition, mining and synthesis (RMS). Two different spintronic memory technologies — Domain Wall Memory (DWM) and STT-MRAM — are utilized to realize the different levels in the memory hierarchy of the domain-specific processor, based on their respective access characteristics. Architectural tradeoffs created by the use of spintronic memories are analyzed. The proposed design achieves 1.5X-4X improvements in energy-delay product compared to a CMOS baseline. 2) It describes the first attempt to use DWM in the cache hierarchy of general-purpose processors. DWM promises unparalleled density by packing several bits of data into each bit-cell. TapeCache, the proposed DWM-based cache architecture, utilizes suitable circuit and architectural optimizations to address two key challenges (i) the high energy and latency requirement of write operations and (ii) the need for shift operations to access the data stored in each DWM bit-cell. At the circuit level, DWM bit-cells that are tailored to the distinct design requirements of different levels in the cache hierarchy are proposed. At the architecture level, TapeCache proposes suitable cache organization and management policies to alleviate the performance impact of shift operations required to access data stored in DWM bit-cells. TapeCache achieves more than 7X improvements in both cache area and energy with virtually identical performance compared to an SRAM-based cache hierarchy. 3) It investigates the design of the on-chip memory hierarchy of general-purpose graphics processing units (GPGPUs)—massively parallel processors that are optimized for data-intensive high-throughput workloads—using DWM. STAG, a high density, energy-efficient Spintronic- Tape Architecture for GPGPU cache hierarchies is described. STAG utilizes different DWM bit-cells to realize different memory arrays in the GPGPU cache hierarchy. To address the challenge of high access latencies due to shifts, STAG predicts upcoming cache accesses by leveraging unique characteristics of GPGPU architectures and workloads, and prefetches data that are both likely to be accessed and require large numbers of shift operations. STAG achieves 3.3X energy reduction and 12.1% performance improvement over CMOS SRAM under iso-area conditions. 4) While the potential of spintronic devices for memories is widely recognized, their utility in realizing logic is much less clear. The thesis presents Spintastic, a new paradigm that utilizes Stochastic Computing (SC) to realize spintronic logic. In SC, data is encoded in the form of pseudo-random bitstreams, such that the probability of a \u271\u27 in a bitstream corresponds to the numerical value that it represents. SC can enable compact, low-complexity logic implementations of various arithmetic functions. Spintastic establishes the synergy between stochastic computing and spin-based logic by demonstrating that they mutually alleviate each other\u27s limitations. On the one hand, various building blocks of SC, which incur significant overheads in CMOS implementations, can be efficiently realized by exploiting the physical characteristics of spin devices. On the other hand, the reduced logic complexity and low logic depth of SC circuits alleviates the shortcomings of spintronic logic. Based on this insight, the design of spin-based stochastic arithmetic circuits, bitstream generators, bitstream permuters and stochastic-to-binary converter circuits are presented. Spintastic achieves 7.1X energy reduction over CMOS implementations for a wide range of benchmarks from the image processing, signal processing, and RMS application domains. 5) In order to evaluate the proposed spintronic designs, the thesis describes various device-to-architecture modeling frameworks. Starting with devices models that are calibrated to measurements, the characteristics of spintronic devices are successively abstracted into circuit-level and architectural models, which are incorporated into suitable simulation frameworks. (Abstract shortened by UMI.