Wideband digital instrumentation for the Italian radio telescopes

Italy has a key role in the radio astronomical international context thanks to large collaborations like the VLBI (Very Long Baseline Interferometry) in which all three radio telescopes (Sardinia,Medicina, Noto) are deeply involved. However, also the single dish activity represents a great opportunity to understand the fundamental laws of nature in the Universe. Usually, in the past, ad-hoc digital backends were developed for each particular scientific goal; however, although highly optimised, they very often do not keep upwith the times. In addition to the absent versatility even if based on reconfigurable FPGA-based hardware, the major issue why digital backends are often obsolete - even before they can be fully exploited - is the very long time necessary to make them integrated into the software controlling the radio telescope. In this thesis, a different approach - both regarding hardware and software - has been developed to overcome aforementioned drawbacks and is described here. The unprecedented achieved scientific results are presented in different fields (imaging, polarimetry, spectroscopy, pulsars), and confirm the forcefulness of the adopted solution. The versatility of the proposed infrastructure also allows us the development of innovative spectrometers, which are able to meet the main requirements astronomers asking us: wide-bandwidth, high-spectral resolution and an uniform passband response (namely, no spectral “holes”). Finally, we describe an innovative infrastructure for the SETI (Search for ExtraTerrestrial Intelligence) international program. In particular, the KLT (Kahrunen-Loeve Transform) has been investigated togetherwith the FFT approach usually adopted

An International Survey of Front-End Receivers and Observing Performance of Telescopes for Radio Astronomy

This paper presents a survey of microwave front-end receivers installed at radio telescopes throughout the World. This unprecedented analysis was conducted as part of a review of front-end developments for Italian radio telescopes, initiated by the Italian National Institute for Astrophysics in 2016. Fifteen international radio telescopes have been selected to be representative of the instrumentation used for radio astronomical observations in the frequency domain from 300 MHz to 116 GHz. A comprehensive description of the existing receivers is presented and their characteristics are compared and discussed. The observing performances of the complete receiving chains are also presented. An overview of on-going developments illustrates and anticipates future trends in front-end projects to meet the most ambitious scientific research goals.Comment: 34 pages, 13 figures, accepted to PAS

MeerTime - the MeerKAT Key Science Program on Pulsar Timing

The MeerKAT telescope represents an outstanding opportunity for radio pulsar timing science with its unique combination of a large collecting area and aperture efficiency (effective area $\sim$7500 m$^2$), system temperature ($T<20$K), high slew speeds (1-2 deg/s), large bandwidths (770 MHz at 20cm wavelengths), southern hemisphere location (latitude $\sim -30^\circ$) and ability to form up to four sub-arrays. The MeerTime project is a five-year program on the MeerKAT array by an international consortium that will regularly time over 1000 radio pulsars to perform tests of relativistic gravity, search for the gravitational wave signature induced by supermassive black hole binaries in the timing residuals of millisecond pulsars, explore the interiors of neutron stars through a pulsar glitch monitoring programme, explore the origin and evolution of binary pulsars, monitor the swarms of pulsars that inhabit globular clusters and monitor radio magnetars. In addition to these primary programmes, over 1000 pulsars will have their arrival times monitored and the data made immediately public. The MeerTime pulsar backend comprises two server-class machines each of which possess four Graphics Processing Units. Up to four pulsars can be coherently dedispersed simultaneously up to dispersion measures of over 1000 pc cm$^{-3}$. All data will be provided in psrfits format. The MeerTime backend will be capable of producing coherently dedispersed filterbank data for timing multiple pulsars in the cores of globular clusters that is useful for pulsar searches of tied array beams. All MeerTime data will ultimately be made available for public use, and any published results will include the arrival times and profiles used in the results.Comment: 15 pages, MeerKAT Science: On the Pathway to the SKA, 25-27 May, 2016, Stellenbosch, South Africa, available at: https://pos.sissa.it/277/011/pd

Towards coordinated site monitoring and common strategies for mitigation of Radio Frequency Interference at the Italian radio telescopes

We present a project to implement a national common strategy for the mitigation of the steadily deteriorating Radio Frequency Interference (RFI) situation at the Italian radio telescopes. The project involves the Medicina, Noto, and Sardinia dish antennas and comprised the definition of a coordinated plan for site monitoring as well as the implementation of state-of-the-art hardware and software tools for RFI mitigation. Coordinated monitoring of frequency bands up to 40 GHz has been performed by means of continuous observations and dedicated measurement campaigns with fixed stations and mobile laboratories. Measurements were executed on the frequency bands allocated to the radio astronomy and space research service for shared or exclusive use and on the wider ones employed by the current and under-development receivers at the telescopes. Results of the monitoring campaigns provide a reference scenario useful to evaluate the evolution of the interference situation at the telescopes sites and a case series to test and improve the hardware and software tools we conceived to counteract radio frequency interference. We developed a multi-purpose digital backend for high spectral and time resolution observations over large bandwidths. Observational results demonstrate that the spectrometer robustness and sensitivity enable the efficient detection and analysis of interfering signals in radio astronomical data. A prototype off-line software tool for interference detection and flagging has been also implemented. This package is capable to handle the huge amount of data delivered by the most modern instrumentation on board of the Italian radio telecsopes, like dense focal plane arrays, and its modularity easen the integration of new algorithms and the re-usability in different contexts or telescopes.Comment: 39 pages, 10 Figures and 7 Tables. INAF Technical Report n. 149 (2022). http://hdl.handle.net/20.500.12386/3208

First M87 Event Horizon Telescope Results. II. Array and Instrumentation

The Event Horizon Telescope (EHT) is a very long baseline interferometry (VLBI) array that comprises millimeter- and submillimeter-wavelength telescopes separated by distances comparable to the diameter of the Earth. At a nominal operating wavelength of ~1.3 mm, EHT angular resolution (λ/D) is ~25 μas, which is sufficient to resolve nearby supermassive black hole candidates on spatial and temporal scales that correspond to their event horizons. With this capability, the EHT scientific goals are to probe general relativistic effects in the strong-field regime and to study accretion and relativistic jet formation near the black hole boundary. In this Letter we describe the system design of the EHT, detail the technology and instrumentation that enable observations, and provide measures of its performance. Meeting the EHT science objectives has required several key developments that have facilitated the robust extension of the VLBI technique to EHT observing wavelengths and the production of instrumentation that can be deployed on a heterogeneous array of existing telescopes and facilities. To meet sensitivity requirements, high-bandwidth digital systems were developed that process data at rates of 64 gigabit s^(−1), exceeding those of currently operating cm-wavelength VLBI arrays by more than an order of magnitude. Associated improvements include the development of phasing systems at array facilities, new receiver installation at several sites, and the deployment of hydrogen maser frequency standards to ensure coherent data capture across the array. These efforts led to the coordination and execution of the first Global EHT observations in 2017 April, and to event-horizon-scale imaging of the supermassive black hole candidate in M87

A digital beamformer for the PHAROS2 phased array feed

PHased Arrays for Re°ector Observing Systems (PHAROS) is a C-band (4–8 GHz) Phased Array Feed (PAF) receiver designed to operate from the primary focus of a large single-dish radio astronomy antenna. It consists of an array of 220-element Vivaldi antennas (10 11 2 polarization), cryogenically cooled at roughly 20K along with low noise ampli¯ers (LNAs), and of analogue beamformers cryogenically cooled at roughly 80 K. PHAROS2, the upgrade of PHAROS, is a PAF demonstrator developed in the framework of the Square Kilometer Array Advanced Instrumentation Program (SKA AIP) with the goal of investigating the potential of the PAF technologies at high frequencies in view of their possible application on the SKA dish telescopes. The PHAROS2 design includes new cryogenically cooled LNAs with state-of-the-art performance, a digital beamformer capable of synthesizing four beams from a sub-array of 24 single-polarization antenna elements, and a C-band multi-channel Warm Section receiver capable of analogue ¯ltering and down-converting the signals from the antennas to a suitable frequency range at the input of the digital backend, providing an instantaneous bandwidth of 275MHz for each signal. In this paper, we describe the design and performance of the PHAROS2 digital backend/beamformer, based on the Italian Tile Processing Module (ITPM) hardware, which was initially developed for the SKA Low Frequency Aperture Array (LFAA). The backend was adapted to perform the beamforming for our PAF application. We describe the implementation of the beamformer on the Field Programmable Gate Arrays (FPGAs) of the ITPM and how the backend was successfully used to synthesize four independent beams, both in the laboratory (across the entire 275MHz instantaneous bandwidth) and during on-¯eld observations at the BEST-2 array (across 16MHz instantaneous bandwidth), which is a subset of the Northern Cross Radio Telescope (located in the district of Bologna, Italy). The beamformer design allows re-scaling to a greater number of beams and wider bandwidths.peer-reviewe

Dish Washer: a Software Tool for RFI Mitigation in Single-dish Radio Astronomical Observations

Radio Frequency Interference is one of the most pressing problems in cm-wavelength world-wide radio astronomy, in particular for single-dish telescope observations. Due to both the increasing abundance of man-made interfering signals and the improved performance of the telescope instrumentation, the impact of RFI at the Italian radio telescope sites is now a major concern, thus strategies for its mitigation are to be applied. Dish Washer is a new software tool for the detection and flagging of RFI in signals collected by single-dish radio telescopes. It implements both interactive flagging and some level of automatic detection of RFI through dedicated algorithms. Its first public release is foreseen as free software under the GNU General Public License