Wideband receive spatial modulation with time domain pre-equalizer for large MIMO systems

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksReceive spatial modulation (RSM) schemes are promising for massive multiple-input-multiple-output (MIMO) systems at millimeter wave (mmWave) bands because they require reduced complexity and low consumption hardware at the user terminal and exploit the receive spatial dimension to attain high spectral efficiency. To the best of our knowledge, these schemes have been developed for narrowband transmission. In this paper, we adapt RSM schemes for outdoor wideband mmWave massive MIMO systems. We consider the downlink of a single user system operating with single carrier RSM and design a low complexity time-domain finite impulse response pre-equalizer to combat the intersymbol interference caused by the wideband transmission, assuming imperfect channel knowledge. We show that receive antenna selection (RAS) is necessary for attaining high spectral efficiency and we suggest fast and efficient RAS algorithm. Simulation results show that the proposed RSM scheme achieves comparable spectral efficiency to the fully digital orthogonal frequency division multiplexing MIMO system with superior energy efficiency.Peer ReviewedPostprint (author's final draft

Spatial modulation schemes and modem architectures for millimeter wave radio systems

The rapid growth of wireless industry opens the door to several use cases such as internet of things and device-to-device communications, which require boosting the reliability and the spectral efficiency of the wireless access network, while reducing the energy consumption at the terminals. The vast spectrum available in millimeter-wave (mmWave) frequency band is one of the most promising candidates to achieve high-speed communications. However, the propagation of the radio signals at high carrier frequencies suffers from severe path-loss which reduces the coverage area. Fortunately, the small wavelengths of the mmWave signals allow packing a large number of antennas not only at the base station (BS) but also at the user terminal (UT). These massive antenna arrays can be exploited to attain high beamforming and combining gains and overcome the path-loss associated with the mmWave propagation. In conventional (fully digital) multiple-input-multiple-output (MIMO) transceivers, each antenna is connected to a specific radio-frequency (RF) chain and high resolution analog-to-digital-converter. Unfortunately, these devices are expensive and power hungry especially at mmWave frequency band and when operating in large bandwidths. Having this in mind, several MIMO transceiver architectures have been proposed with the purpose of reducing the hardware cost and the energy consumption. Fully connected hybrid analog and digital precoding schemes were proposed in with the aim of replacing some of the conventional RF chains by energy efficient analog devices. These fully connected mapping requires many analog devices that leads to non-negligible energy consumption. Partially connected hybrid architectures have been proposed to improve the energy efficiency of the fully connected transceivers by reducing the number of analog devices. Simplifying the transceiver’s architecture to reduce the power consumption results in a degradation of the attained spectral efficiency. In this PhD dissertation, we propose novel modulation schemes and massive MIMO transceiver design to combat the challenges at the mmWave cellular systems. The structure of the doctoral manuscript can be expressed as In Chapter 1, we introduce the transceiver design challenges at mmWave cellular communications. Then, we illustrate several state of the art architectures and highlight their limitations. After that, we propose scheme that attains high-energy efficiency and spectrum efficiency. In chapter 2, first, we mathematically describe the state of the art of the SM and highlight the main challenges with these schemes when applied at mmWave frequency band. In order to combat these challenges (for example, high cost and high power consumption), we propose novel SM schemes specifically designed for mmWave massive MIMO systems. After that, we explain how these schemes can be exploited in attaining energy efficient UT architecture. Finally, we present the channel model, systems assumptions and the transceiver devices power consumption models. In chapter 3, we consider single user SM system. First, we propose downlink (DL) receive SM (RSM) scheme where the UT can be implemented with single or multiple radio-frequency chains and the BS can be fully digital or hybrid architecture. Moreover, we consider different precoders at the BS and propose low complexity and efficient antenna selection schemes for narrowband and wideband transmissions. After that, we propose joint uplink-downlink SM scheme where we consider RSM in the DL and transmit SM (TSM) in the UL based on energy efficient hybrid UT architecture. In chapter 4, we extend the SM system to the multi-user case. Specifically, we develop joint multi-user power allocation, user selection and antenna selection algorithms for the broadcast and the multiple access channels. Chapter 5 is presented for concluding the thesis and proposing future research directions.Considerando los altos requerimientos de los servicios de nueva generación, las infraestructuras de red actual se han visto obligadas a evolucionar en la forma de manejar los diferentes recursos de red y computación. Con este fin, nuevas tecnologías han surgido para soportar las funcionalidades necesarias para esta evolución, significando también un gran cambio de paradigma en el diseño de arquitecturas para la futura implementación de redes.En este sentido, este documento de tesis doctoral presenta un análisis sobre estas tecnologías, enfocado en el caso de redes inter/intra Data Centre. Por consiguiente, la introducción de tecnologías basadas en redes ópticas ha sido estudiada, con el fin de identificar problemas actuales que puedan llegar a ser solucionados mediante el diseño y aplicación de nuevas técnicas, asimismo como a través del desarrollo o la extensión de los componentes de arquitectura de red.Con este propósito, se han definido una serie de propuestas relacionadas con aspectos cruciales, así como el control de dispositivos ópticos por SDN para habilitar el manejo de redes híbridas, la necesidad de definir un mecanismo de descubrimiento de topologías ópticas capaz de exponer información precisa, y el analizar las brechas existentes para la definición de una arquitectura común en fin de soportar las comunicaciones 5G.Para validar estas propuestas, se han presentado una serie de validaciones experimentales por medio de escenarios de prueba específicos, demostrando los avances en control, orquestación, virtualización y manejo de recursos con el fin de optimizar su utilización. Los resultados expuestos, además de corroborar la correcta operación de los métodos y componentes propuestos, abre el camino hacia nuevas formas de adaptar los actuales despliegues de red respecto a los desafíos definidos en el inicio de una nueva era de las telecomunicaciones.Postprint (published version

Space-time-frequency methods for interference-limited communication systems

textTraditionally, noise in communication systems has been modeled as an additive, white Gaussian noise process with independent, identically distributed samples. Although this model accurately reflects thermal noise present in communication system electronics, it fails to capture the statistics of interference and other sources of noise, e.g. in unlicensed communication bands. Modern communication system designers must take into account interference and non-Gaussian noise to maximize efficiencies and capacities of current and future communication networks. In this work, I develop new multi-dimensional signal processing methods to improve performance of communication systems in three applications areas: (i) underwater acoustic, (ii) powerline, and (iii) multi-antenna cellular. In underwater acoustic communications, I address impairments caused by strong, time-varying and Doppler-spread reverberations (self-interference) using adaptive space-time signal processing methods. I apply these methods to array receivers with a large number of elements. In powerline communications, I address impairments caused by non-Gaussian noise arising from devices sharing the powerline. I develop and apply a cyclic adaptive modulation and coding scheme and a factor-graph-based impulsive noise mitigation method to improve signal quality and boost link throughput and robustness. In cellular communications, I develop a low-latency, high-throughput space-time-frequency processing framework used for large scale (up to 128 antenna) MIMO. This framework is used in the world's first 100-antenna MIMO system and processes up to 492 Gbps raw baseband samples in the uplink and downlink directions. My methods prove that multi-dimensional processing methods can be applied to increase communication system performance without sacrificing real-time requirements.Electrical and Computer Engineerin

Time reversal transmission approach for ultra wideband communications

[no abstract

Equalizador híbrido na banda das ondas milimétricas para sistemas GFDM

Wireless communication using very-large multiple-input multiple-output (MIMO) antennas has been regarded as one of the enabling technologies for the future mobile communication. It refers to the idea of equipping cellular base stations (BSs) with a very large number of antennas giving the possibility to focusing the transmitted signal energy into very short-range areas, which will provide huge improvements in the capacity, in addition to the spectral and energy efficiency. Concurrently, this demand for high data rates and capacity led to the necessity of exploiting the enormous amount of spectrum in the millimeter wave (mmWave) bands. However, the combination of millimeter-wave communications arrays with a massive number of antennas has the potential to dramatically enhance the features of wireless communication. This combination implies high cost and power consumption in the conventional full digital architecture, where each RF chain is dedicated to one antenna. The solution is the use of a hybrid architecture, where a small number of RF chains are connected to a large number of antennas through a network of phase shifters. On the other hand, another important factor that affect the transmission quality is the modulation technique, which plays an important role in the performance of the transmission process, for instance, GFDM is a flexible non-orthogonal multicarrier modulation concept, that introduces additional degrees of freedom when compared to other multicarrier techniques. This flexibility makes GFDM a promising solution for the future cellular generations, because it can achieve different requirements, such as higher spectrum efficiency, better control of out-of-band (OOB) emissions, as well as achieving low peak to average power ratio (PAPR). In this work, we present an analog-digital transmitter and receiver structures. Considering a GFDM modulation technique to be implemented in the digital part, while in the analog part, we propose a full connected hybrid multiuser linear equalizer, combined with low complexity hybrid precoder for wideband millimeter-wave massive MIMO systems. The hybrid equalizer is optimized by minimizing the mean square error between the hybrid approach and the full digital counterpart. The results show that the performance of the proposed hybrid scheme is very close to the full digital counterpart and the gap reduces as the number of RF chains increases.O uso de um número elevado de antenas, também designado por MIMO massivo, tem sido considerada uma das tecnologias mais promissoras para os futuros sistemas de comunicação sem fios. Esta tecnologia, refere-se à ideia de equipar as estações base (BSs) com um número muito grande de antenas, dando a possibilidade de focar a energia do sinal transmitido em áreas de alcance muito restritas, o que proporcionará grandes melhorias na capacidade, além das espectrais e eficiência energética. Simultaneamente, a exigência por taxas de dados elevadas e capacidade levou à necessidade de explorar uma enorme quantidade de espectro nas bandas de ondas milimétricas (mmWave). A combinação de comunicação na banda das ondas milimétricas com terminais equipados com um grande número de antenas tem o potencial de melhorar drasticamente os recursos da comunicação sem fios. Considerando no entanto uma arquitetura digital, usada em sistemas MIMO convencionais, em que cada cadeia de RF é dedicada a uma antena, implica um custo e um consumo de energia elevados. A solução é o uso de uma arquitetura híbrida, na qual um pequeno número de cadeias de RF é conectado a um grande número de antenas através de um conjunto de deslocadores de fase. Outro fator importante que afeta a qualidade da transmissão é a técnica de modulação usada, que desempenha um papel importante no desempenho do processo de transmissão. O GFDM é um conceito de modulação de portadora múltipla, não ortogonal e flexível, que introduz graus de liberdade adicionais, quando comparado a outras técnicas de portadora múltipla, como o OFDM. Essa flexibilidade faz do GFDM uma solução promissora para as futuras gerações celulares, pois pode atender a diferentes requisitos, como maior eficiência de espectro, melhor controle das emissões fora de banda (OOB), além de atingir baixo rácio de potência média / pico ( PAPR). Neste trabalho, é assumido uma arquitetura hibrida no transmissor e recetor. Considera-se uma técnica de modulação GFDM a ser implementada na parte digital, enquanto na parte analógica, é proposto um equalizador linear híbrido multiutilizador totalmente conectado, i.e., cada cadeia RF está ligada a todas as antenas, combinado com um pré-codificador híbrido, de baixa complexidade para sistemas MIMO massivo de banda larga. O equalizador híbrido é otimizado, minimizando o erro quadrático médio entre a abordagem híbrida e a contraparte totalmente digital. Os resultados mostram que o desempenho do esquema híbrido proposto está muito próximo do equivalente digital, à medida que o número de cadeias de RF aumenta.Mestrado em Engenharia Eletrónica e Telecomunicaçõe

Deep Learning-aided TR-UWB MIMO System

This paper presents a novel deep learning-aided scheme dubbed PRρ-net for improving the bit error rate (BER) of the Time Reversal (TR) Ultra-Wideband (UWB) Multiple Input Multiple Output (MIMO) system with imperfect Channel State Information (CSI). The designed system employs Frequency Division Duplexing (FDD) with explicit feedback in a scenario where the CSI is subject to estimation and quantization errors. Imperfect CSI causes a drastic increase in BER of the FDD-based TR-UWB MIMO system, and we tackle this problem by proposing a novel neural network-aided design for the conventional precoder at the transmitter and equalizer at the receiver. A closed-form expression for the initial estimation of the channel correlation is derived by utilizing transmitted data in time-varying channel conditions modeled as a Markov process. Subsequently, a neural network-aided design is proposed to improve the initial estimate of channel correlation. An adaptive pilot transmission strategy for a more efficient data transmission is proposed that uses channel correlation information. The theoretical analysis of the model under the Gaussian assumptions is presented, and the results agree with the Monte-Carlo simulations. The simulation results indicate high performance gains when the suggested neural networks are used to combat the effect of channel imperfections

Equalization of MIMO Channels in LTE-Advanced

LTE-Advanced is one of the most evolving and competing standards that target the high speed 4G wireless communications. In order to meet the target of this new cellular technology developed under auspices of the 3GPP standardization bodies, it is necessary to ensure that this technology is able to provide the headline requirements recommended for the terrestrial components of the IMT-Advanced radio interface for 4G broadband mobile communications. One of the key radio technologies that will enable LTE-Advanced to achieve the high data throughput rates is the use of MIMO antennas that play an important role as the conventional communications like using more bandwidths and higher modulation types are limited. Together with this are the downlink OFDMA and the uplink SC-FDMA techniques that are employed to improve the system architecture burdened with the data rates rising pretty well above what was previously in use. The combination of these technologies will help LTE-Advanced keep pace with other wireless technologies that may be competing to offer very high data rates and high level of mobility. But achieving the high data rate up to 1 Gbits/s in 4G mobile networks over wide frequency bandwidths and recovering the original information without being corrupted and downgraded has been a daunting task for engineers. Thus, this paper will briefly discuss the performances of MIMO equalization techniques such as MMSE, ZF and ZF-SIC equalizers in a Rayleigh multichannel fading.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format

Performance enhancement for LTE and beyond systems

A thesis submitted to the University of Bedfordshire, in partial fulfilment of the requirements for the degree of Doctor of PhilosophyWireless communication systems have undergone fast development in recent years. Based on GSM/EDGE and UMTS/HSPA, the 3rd Generation Partnership Project (3GPP) specified the Long Term Evolution (LTE) standard to cope with rapidly increasing demands, including capacity, coverage, and data rate. To achieve this goal, several key techniques have been adopted by LTE, such as Multiple-Input and Multiple-Output (MIMO), Orthogonal Frequency-Division Multiplexing (OFDM), and heterogeneous network (HetNet). However, there are some inherent drawbacks regarding these techniques. Direct conversion architecture is adopted to provide a simple, low cost transmitter solution. The problem of I/Q imbalance arises due to the imperfection of circuit components; the orthogonality of OFDM is vulnerable to carrier frequency offset (CFO) and sampling frequency offset (SFO). The doubly selective channel can also severely deteriorate the receiver performance. In addition, the deployment of Heterogeneous Network (HetNet), which permits the co-existence of macro and pico cells, incurs inter-cell interference for cell edge users. The impact of these factors then results in significant degradation in relation to system performance. This dissertation aims to investigate the key techniques which can be used to mitigate the above problems. First, I/Q imbalance for the wideband transmitter is studied and a self-IQ-demodulation based compensation scheme for frequencydependent (FD) I/Q imbalance is proposed. This combats the FD I/Q imbalance by using the internal diode of the transmitter and a specially designed test signal without any external calibration instruments or internal low-IF feedback path. The instrument test results show that the proposed scheme can enhance signal quality by 10 dB in terms of image rejection ratio (IRR). In addition to the I/Q imbalance, the system suffers from CFO, SFO and frequency-time selective channel. To mitigate this, a hybrid optimum OFDM receiver with decision feedback equalizer (DFE) to cope with the CFO, SFO and doubly selective channel. The algorithm firstly estimates the CFO and channel frequency response (CFR) in the coarse estimation, with the help of hybrid classical timing and frequency synchronization algorithms. Afterwards, a pilot-aided polynomial interpolation channel estimation, combined with a low complexity DFE scheme, based on minimum mean squared error (MMSE) criteria, is developed to alleviate the impact of the residual SFO, CFO, and Doppler effect. A subspace-based signal-to-noise ratio (SNR) estimation algorithm is proposed to estimate the SNR in the doubly selective channel. This provides prior knowledge for MMSE-DFE and automatic modulation and coding (AMC). Simulation results show that this proposed estimation algorithm significantly improves the system performance. In order to speed up algorithm verification process, an FPGA based co-simulation is developed. Inter-cell interference caused by the co-existence of macro and pico cells has a big impact on system performance. Although an almost blank subframe (ABS) is proposed to mitigate this problem, the residual control signal in the ABS still inevitably causes interference. Hence, a cell-specific reference signal (CRS) interference cancellation algorithm, utilizing the information in the ABS, is proposed. First, the timing and carrier frequency offset of the interference signal is compensated by utilizing the cross-correlation properties of the synchronization signal. Afterwards, the reference signal is generated locally and channel response is estimated by making use of channel statistics. Then, the interference signal is reconstructed based on the previous estimate of the channel, timing and carrier frequency offset. The interference is mitigated by subtracting the estimation of the interference signal and LLR puncturing. The block error rate (BLER) performance of the signal is notably improved by this algorithm, according to the simulation results of different channel scenarios. The proposed techniques provide low cost, low complexity solutions for LTE and beyond systems. The simulation and measurements show good overall system performance can be achieved

SGD Frequency-Domain Space-Frequency Semiblind Multiuser Receiver with an Adaptive Optimal Mixing Parameter

A novel stochastic gradient descent frequency-domain (FD) space-frequency (SF) semiblind multiuser receiver with an adaptive optimal mixing parameter is proposed to improve performance of FD semiblind multiuser receivers with a fixed mixing parameters and reduces computational complexity of suboptimal FD semiblind multiuser receivers in SFBC downlink MIMO MC-CDMA systems where various numbers of users exist. The receiver exploits an adaptive mixing parameter to mix information ratio between the training-based mode and the blind-based mode. Analytical results prove that the optimal mixing parameter value relies on power and number of active loaded users existing in the system. Computer simulation results show that when the mixing parameter is adapted closely to the optimal mixing parameter value, the performance of the receiver outperforms existing FD SF adaptive step-size (AS) LMS semiblind based with a fixed mixing parameter and conventional FD SF AS-LMS training-based multiuser receivers in the MSE, SER and signal to interference plus noise ratio in both static and dynamic environments

Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems

Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER