The effect of the color filter array layout choice on state-of-the-art demosaicing

Interpolation from a Color Filter Array (CFA) is the most common method for obtaining full color image data. Its success relies on the smart combination of a CFA and a demosaicing algorithm. Demosaicing on the one hand has been extensively studied. Algorithmic development in the past 20 years ranges from simple linear interpolation to modern neural-network-based (NN) approaches that encode the prior knowledge of millions of training images to fill in missing data in an inconspicious way. CFA design, on the other hand, is less well studied, although still recognized to strongly impact demosaicing performance. This is because demosaicing algorithms are typically limited to one particular CFA pattern, impeding straightforward CFA comparison. This is starting to change with newer classes of demosaicing that may be considered generic or CFA-agnostic. In this study, by comparing performance of two state-of-the-art generic algorithms, we evaluate the potential of modern CFA-demosaicing. We test the hypothesis that, with the increasing power of NN-based demosaicing, the influence of optimal CFA design on system performance decreases. This hypothesis is supported with the experimental results. Such a finding would herald the possibility of relaxing CFA requirements, providing more freedom in the CFA design choice and producing high-quality cameras

Improvement of BM3D Algorithm and Employment to Satellite and CFA Images Denoising

This paper proposes a new procedure in order to improve the performance of block matching and 3-D filtering (BM3D) image denoising algorithm. It is demonstrated that it is possible to achieve a better performance than that of BM3D algorithm in a variety of noise levels. This method changes BM3D algorithm parameter values according to noise level, removes prefiltering, which is used in high noise level; therefore Peak Signal-to-Noise Ratio (PSNR) and visual quality get improved, and BM3D complexities and processing time are reduced. This improved BM3D algorithm is extended and used to denoise satellite and color filter array (CFA) images. Output results show that the performance has upgraded in comparison with current methods of denoising satellite and CFA images. In this regard this algorithm is compared with Adaptive PCA algorithm, that has led to superior performance for denoising CFA images, on the subject of PSNR and visual quality. Also the processing time has decreased significantly.Comment: 11 pages, 7 figur

Color-decoupled photo response non-uniformity for digital image forensics

The last few years have seen the use of photo response non-uniformity noise (PRNU), a unique fingerprint of imaging sensors, in various digital forensic applications such as source device identification, content integrity verification and authentication. However, the use of a colour filter array for capturing only one of the three colour components per pixel introduces colour interpolation noise, while the existing methods for extracting PRNU provide no effective means for addressing this issue. Because the artificial colours obtained through the colour interpolation process is not directly acquired from the scene by physical hardware, we expect that the PRNU extracted from the physical components, which are free from interpolation noise, should be more reliable than that from the artificial channels, which carry interpolation noise. Based on this assumption we propose a Couple-Decoupled PRNU (CD-PRNU) extraction method, which first decomposes each colour channel into 4 sub-images and then extracts the PRNU noise from each sub-image. The PRNU noise patterns of the sub-images are then assembled to get the CD-PRNU. This new method can prevent the interpolation noise from propagating into the physical components, thus improving the accuracy of device identification and image content integrity verification

Color Filter Array Image Analysis for Joint Denoising and Demosaicking

Noise is among the worst artifacts that affect the perceptual quality of the output from a digital camera. While cost-effective and popular, single-sensor solutions to camera architectures are not adept at noise suppression. In this scheme, data are typically obtained via a spatial subsampling procedure implemented as a color filter array (CFA), a physical construction whereby each pixel location measures the intensity of the light corresponding to only a single color. Aside from undersampling, observations made under noisy conditions typically deteriorate the estimates of the full-color image in the reconstruction process commonly referred to as demosaicking or CFA interpolation in the literature. A typical CFA scheme involves the canonical color triples (i.e., red, green, blue), and the most prevalent arrangement is called Bayer pattern. As the general trend of increased image resolution continues due to prevalence of multimedia, the importance of interpolation is de-emphasized while the concerns for computational efficiency, noise, and color fidelity play an increasingly prominent role in the decision making of a digital camera architect. For instance, the interpolation artifacts become less noticeable as the size of the pixel shrinks with respect to the image features, while the decreased dimensionality of the pixel sensors on the complementary metal oxide semiconductor (CMOS) and charge coupled device (CCD) sensors make the pixels more susceptible to noise. Photon-limited influences are also evident in low-light photography, ranging from a specialty camera for precision measurement to indoor consumer photography. Sensor data, which can be interpreted as subsampled or incomplete image data, undergo a series of image processing procedures in order to produce a digital photograph. However, these same steps may amplify noise introduced during image acquisition. Specifically, the demosaicking step is a major source of conflict between the image processing pipeline and image sensor noise characterization because the interpolation methods give high priority to preserving the sharpness of edges and textures. In the presence of noise, noise patterns may form false edge structures; therefore, the distortions at the output are typically correlated with the signal in a complicated manner that makes noise modelling mathematically intractable. Thus, it is natural to conceive of a rigorous tradeoff between demosaicking and image denoising

Discrete wavelet transform based multispectral filter array demosaicking

International audienceThe idea of colour filter array may be adapted to multi-spectral image acquisition by integrating more filter types into the array, and developing associated demosaicking algorithms. Several methods employing discrete wavelet transform (DWT) have been proposed for CFA demosaicking. In this work, we put forward an extended use of DWT for mul-tispectral filter array demosaicking. The extension seemed straightforward, however we observed striking results. This work contributes to better understanding of the issue by demonstrating that spectral correlation and spatial resolution of the images exerts a crucial influence on the performance of DWT based demosaicking

Color reproduction from noisy CFA data of single sensor digital cameras

2007-2008 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Evaluation of the Colorimetric Performance of Single-Sensor Image Acquisition Systems Employing Colour and Multispectral Filter Array

International audienceSingle-sensor colour imaging systems mostly employ a colour filter array (CFA). This enables the acquisition of a colour image by a single sensor at one exposure at the cost of reduced spatial resolution. The idea of CFA fit itself well with multispectral purposes by incorporating more than three types of filters into the array which results in multispectral filter array (MSFA). In comparison with a CFA, an MSFA trades spatial resolution for spectral resolution. A simulation was performed to evaluate the colorimetric performance of such CFA/MSFA imaging systems and investigate the trade-off between spatial resolution and spectral resolution by comparing CFA and MSFA systems utilising various filter characteristics and demosaicking methods including intra-and inter-channel bilinear interpolation as well as discrete wavelet transformed based techniques. In general, 4-band and 8-band MSFAs provide better or comparable performance than the CFA setup in terms of CIEDE2000 and S-CIELAB colour difference. This indicates that MSFA would be favourable for colorimetric purposes

Bayesian demosaicing using Gaussian scale mixture priors with local adaptivity in the dual tree complex wavelet packet transform domain

In digital cameras and mobile phones, there is an ongoing trend to increase the image resolution, decrease the sensor size and to use lower exposure times. Because smaller sensors inherently lead to more noise and a worse spatial resolution, digital post-processing techniques are required to resolve many of the artifacts. Color filter arrays (CFAs), which use alternating patterns of color filters, are very popular because of price and power consumption reasons. However, color filter arrays require the use of a post-processing technique such as demosaicing to recover full resolution RGB images. Recently, there has been some interest in techniques that jointly perform the demosaicing and denoising. This has the advantage that the demosaicing and denoising can be performed optimally (e.g. in the MSE sense) for the considered noise model, while avoiding artifacts introduced when using demosaicing and denoising sequentially. ABSTRACT In this paper, we will continue the research line of the wavelet-based demosaicing techniques. These approaches are computationally simple and very suited for combination with denoising. Therefore, we will derive Bayesian Minimum Squared Error (MMSE) joint demosaicing and denoising rules in the complex wavelet packet domain, taking local adaptivity into account. As an image model, we will use Gaussian Scale Mixtures, thereby taking advantage of the directionality of the complex wavelets. Our results show that this technique is well capable of reconstructing fine details in the image, while removing all of the noise, at a relatively low computational cost. In particular, the complete reconstruction (including color correction, white balancing etc) of a 12 megapixel RAW image takes 3.5 sec on a recent mid-range GPU