Framework for waveband switching in multigranular optical networks: part I-multigranular cross-connect architectures

Optical networks using wavelength-division multiplexing (WDM) are the foremost solution to the ever-increasing traffic in the Internet backbone. Rapid advances in WDM technology will enable each fiber to carry hundreds or even a thousand wavelengths (using dense-WDM, or DWDM, and ultra-DWDM) of traffic. This, coupled with worldwide fiber deployment, will bring about a tremendous increase in the size of the optical cross-connects, i.e., the number of ports of the wavelength switching elements. Waveband switching (WBS), wherein wavelengths are grouped into bands and switched as a single entity, can reduce the cost and control complexity of switching nodes by minimizing the port count. This paper presents a detailed study on recent advances and open research issues in WBS networks. In this study, we investigate in detail the architecture for various WBS cross-connects and compare them in terms of the number of ports and complexity and also in terms of how flexible they are in adjusting to dynamic traffic. We outline various techniques for grouping wavelengths into bands for the purpose of WBS and show how traditional wavelength routing is different from waveband routing and why techniques developed for wavelength-routed networks (WRNs) cannot be simply applied to WBS networks. We also outline how traffic grooming of subwavelength traffic can be done in WBS networks. In part II of this study [Cao , submitted to J. Opt. Netw.], we study the effect of wavelength conversion on the performance of WBS networks with reconfigurable MG-OXCs. We present an algorithm for waveband grouping in wavelength-convertible networks and evaluate its performance. We also investigate issues related to survivability in WBS networks and show how waveband and wavelength conversion can be used to recover from failures in WBS networks

A STUDY ON WAVEBAND ROUTING OPTICAL NETWORKS EMPLOYING WAVEBAND SELECTIVE SWITCH-BASED CROSS-CONNECTS

A waveband cross-connect architecture is proposed, utilizing small-scale wavebandselective switches to make the best use of present optical switch technologies and exploit opticalwaveband switching for creating cost-effective large capacity optical path networks. Anappropriate network design algorithm is then developed for the waveband routing opticalnetworks employing the waveband cross-connect architecture. Numerical experiments prove thatapplying the small-scale waveband selective switch-based node architecture offers a significantswitch scale reduction. The effect of the waveband capacity selection on the overall switch scalereduction was also investigated

Optimization Methods for Optical Long-Haul and Access Networks

Optical communications based on fiber optics and the associated technologies have seen remarkable progress over the past two decades. Widespread deployment of optical fiber has been witnessed in backbone and metro networks as well as access segments connecting to customer premises and homes. Designing and developing a reliable, robust and efficient end-to-end optical communication system have thus emerged as topics of utmost importance both to researchers and network operators. To fulfill these requirements, various problems have surfaced and received attention, such as network planning, capacity placement, traffic grooming, traffic scheduling, and bandwidth allocation. The optimal network design aims at addressing (one or more of) these problems based on some optimization objectives. In this thesis, we consider two of the most important problems in optical networks; namely the survivability in optical long-haul networks and the problem of bandwidth allocation and scheduling in optical access networks. For the former, we present efficient and accurate models for availability-aware design and service provisioning in p-cycle based survivable networks. We also derive optimization models for survivable network design based on p-trail, a more general protection structure, and compare its performance with p-cycles. Indeed, major cost savings can be obtained when the optical access and long-haul subnetworks become closer to each other by means of consolidation of access and metro networks. As this distance between long-haul and access networks reduces, and the need and expectations from passive optical access networks (PONs) soar, it becomes crucial to efficiently manage bandwidth in the access while providing the desired level of service availability in the long-haul backbone. We therefore address in this thesis the problem of bandwidth management and scheduling in passive optical networks; we design efficient joint and non-joint scheduling and bandwidth allocation methods for multichannel PON as well as next generation 10Gbps Ethernet PON (10G-EPON) while addressing the problem of coexistence between 10G-EPONs and multichannel PONs

End-to-end provisioning in multi-domain/multi-layer networks

The last decade has seen many advances in high-speed networking technologies. At the Layer 1 fiber-optic level, dense wavelength division multiplexing (DWDM) has seen fast growth in long-haul backbone/metro sectors. At the Layer 1.5 level, revamped next-generation SONET/SDH (NGS) has gained strong traction in the metro space, as a highly flexible sub-rate\u27 aggregation and grooming solution. Meanwhile, ubiquitous Ethernet (Layer 2) and IP (Layer 3) technologies have also seen the introduction of new quality of service (QoS) paradigms via the differentiated services (Diff-Serv) and integrated services (Intserv) frameworks. In recent years, various control provisioning standards have also been developed to provision these new networks, e.g., via efforts within the IETF, ITU-T, and OIF organizations. As these networks technologies gain traction, there is an increasing need to internetwork multiple domains operating at different technology layers, e.g., IP, Ethernet, SONET, DWDM. However, most existing studies have only looked at single domain networks or multiple domains operating at the same technology layer. As a result, there is now a growing level of interest in developing expanded control solutions for multi-domain/multi-layer networks, i.e., IP-SONET-DWDM. Now given the increase in the number of inter-connected domains, it is difficult for a single entity to maintain complete \u27global\u27 information across all domains. Hence, related solutions must pursue a distributed approach to handling multi-domain/multi-layer problem. Namely, key provisions are needed in the area of inter- domain routing, path computation, and signaling. The work in this thesis addresses these very challenges. Namely, a hierarchical routing framework is first developed to incorporate the multiple link types/granularities encountered in different network domains. Commensurate topology abstraction algorithms and update strategies are then introduced to help condense domain level state and propagate global views. Finally, distributed path computation and signaling setup schemes are developed to leverage the condensed global state information and make intelligent connection routing decisions. The work leverages heavily from graph theory concepts and also addresses the inherent distributed grooming dimension of multi-layer networks. The performance of the proposed framework and algorithms is studied using discrete event simulation techniques. Specifically, a range of multi-domain/multi-layer network topologies are designed and tested. Findings show that the propagation of inter-domain tunneled link state has a huge impact on connection blocking performance, lowering inter-domain connection blocking rates by a notable amount. More importantly, these gains are achieved without any notable increase in inter-domain routing loads. Furthermore, the results also show that topology abstraction is most beneficial at lower network load settings, and when used in conjunction with load-balancing routing.\u2

Schemes for building an efficient all-optical virtual private network.

by Tam Scott Kin Lun.Thesis submitted in: October 2005.Thesis (M.Phil.)--Chinese University of Hong Kong, 2006.Includes bibliographical references (leaves 58-64).Abstracts in English and Chinese.Chapter 1. --- Introduction --- p.1Chapter 1.1. --- Optical Networks --- p.1Chapter 1.1.1. --- IP over Optical Networks --- p.1Chapter 1.1.2. --- Challenges in Optical Networks --- p.4Chapter 1.2. --- Virtual Private Networks (VPN) --- p.5Chapter 1.2.1. --- CE Based VPN --- p.6Chapter 1.2.2. --- Network Based VPN --- p.7Chapter 1.2.2.1. --- MPLS Layer 2 VPN --- p.8Chapter 1.2.2.2. --- MPLS Layer 3 VPN --- p.9Chapter 1.2.3. --- Optical VPN --- p.9Chapter 1.2.4. --- Challenges in VPN Technologies --- p.11Chapter 1.3. --- Objective of this Thesis --- p.11Chapter 1.4. --- Outline of this Thesis --- p.12Chapter 2. --- Architecture of an All-Optical VPN --- p.13Chapter 2.1. --- Introduction --- p.13Chapter 2.2. --- Networking Vendor Activities --- p.13Chapter 2.3. --- Service Provider Activities --- p.15Chapter 2.4. --- Standard Bodies Activities --- p.16Chapter 2.5. --- Requirements for All-Optical VPN --- p.17Chapter 2.6. --- Reconfigurability of an All-Optical VPN --- p.19Chapter 2.7. --- Switching Methods in All-Optical VPN --- p.20Chapter 2.8. --- Survivability of an All-Optical VPN --- p.23Chapter 3. --- Maximizing the Utilization Of A Survivable Multi-Ring WDM Network --- p.25Chapter 3.1. --- Introduction --- p.25Chapter 3.2. --- Background --- p.25Chapter 3.3. --- Method --- p.26Chapter 3.3.1. --- Effect on packet based services --- p.28Chapter 3.3.2. --- Effect on optical circuit based services --- p.28Chapter 3.4. --- Simulation results --- p.29Chapter 3.5. --- Chapter Summary --- p.36Chapter 4. --- Design of an All-Optical VPN Processing Engine --- p.37Chapter 4.1. --- Introduction --- p.37Chapter 4.2. --- Concepts of Optical Processors --- p.38Chapter 4.3. --- Design Principles of the All-Optical VPN Processing Engine --- p.40Chapter 4.3.1. --- Systolic System --- p.41Chapter 4.3.2. --- Design Considerations of an Optical Processing Cell --- p.42Chapter 4.3.2.1. --- Mach-Zehnder Structures --- p.43Chapter 4.3.2.2. --- Vertical Cavity Semiconductor Optical Amplifier --- p.43Chapter 4.3.2.3. --- The Optical Processing Cell --- p.44Chapter 4.3.3. --- All-Optical VPN Processing Engine --- p.47Chapter 4.4. --- Design Evaluation --- p.49Chapter 4.5. --- Application Example --- p.50Chapter 4.6. --- Chapter Summary --- p.54Chapter 5. --- Conclusion --- p.55Chapter 5.1. --- Summary of the Thesis --- p.55Chapter 5.2. --- Future Works --- p.56Chapter 6. --- References --- p.5

HFR Networks: New concepts and technologies

To study the main trends which drive the merging of fiber and wireless technologies in access networks. As the hybrid radio networks constitute a new and emerging field of knowledge it is difficult to get a clear picture of their main building blocks and basic technologies and concepts. Due to the lack of reference texts with a basic entry level, in this PFC we aim at carrying out a thorough study of the related literature in order to establish a clear classification of systems and techniques, to clarify the basic terms and to study the specific transmission characteristics of hybrid radio links, both from a point to point as well as from a networks management perspective. • Steaming from the above, the main physical effects and phenomena around optical and wireless technologies will be reviewed and the basic analytical as well as computer and simulation tools will be presented along with some simulation examples showing relevant fiber-radio transmission effects and techniques. • The main driver will be to help newcomers to the field to get a fast understanding of the basic related ideas and analysis techniques for hybrid fiber-radio networks. • In this regard the key building blocks to implement the HFR's networks will be identified. These should include underlying concepts such as working frequencies, general structure for the coexistence of wireless and fiber technologies, the network components and topologies proposed, as well as the hybrid link's features, characterizing parameters and main impairments that degrade the quality of transmission

Investigation of performance issues affecting optical circuit and packet switched WDM networks

Optical switching represents the next step in the evolution of optical networks. This thesis describes work that was carried out to examine performance issues which can occur in two distinct varieties of optical switching networks. Slow optical switching in which lightpaths are requested, provisioned and torn down when no longer required is known as optical circuit switching (OCS). Services enabled by OCS include wavelength routing, dynamic bandwidth allocation and protection switching. With network elements such as reconfigurable optical add/drop multiplexers (ROADMs) and optical cross connects (OXCs) now being deployed along with the generalized multiprotocol label switching (GMPLS) control plane this represents the current state of the art in commercial networks. These networks often employ erbium doped fiber amplifiers (EDFAs) to boost the optical signal to noise ratio of the WDM channels and as channel configurations change, wavelength dependent gain variations in the EDFAs can lead to channel power divergence that can result in significant performance degradation. This issue is examined in detail using a reconfigurable wavelength division multiplexed (WDM) network testbed and results show the severe impact that channel reconfiguration can have on transmission performance. Following the slow switching work the focus shifts to one of the key enabling technologies for fast optical switching, namely the tunable laser. Tunable lasers which can switch on the nanosecond timescale will be required in the transmitters and wavelength converters of optical packet switching networks. The switching times and frequency drifts, both of commercially available lasers, and of novel devices are investigated and performance issues which can arise due to this frequency drift are examined. An optical packet switching transmitter based on a novel label switching technique and employing one of the fast tunable lasers is designed and employed in a dual channel WDM packet switching system. In depth performance evaluations of this labelling scheme and packet switching system show the detrimental impact that wavelength drift can have on such systems

Journal of Telecommunications and Information Technology, 2018, nr 1

kwartalni