Visualization of Aircraft Longitudinal-Axis Motion

In this paper, the use of continuous mathematical models of an aircraft in an aircraft simulator is described. The models are of lower degree and less time-consuming for calculation. Computer implementation of the models capable to work faster and more accurately and efficiently is also described. The suggested approach allows to achieve the required precision at accelerated simulation speed using the continuous mathematical models of an aircraft. Frequency of the computation of continuous mathematical models of an aircraft is higher, reaching up to 200 times per second. The main focus of the paper is designing continuous mathematical models of an aircraft, their simulation and visualization in aircraft simulators. Current mathematical models of a control of objects motion are based on aircraft aerodynamics. In our approach, these models have impact on the quality and completeness of simulation process and are crucial for computer modeling and visualization of equations of the continuous mathematical models of an aircraft. In the paper, creating continuous mathematical models of an aircraft and the way of visualization of simulation results are described in detail. The main aim of computer simulation of continuous mathematical models of an aircraft is pilots training. Aircraft simulator plays a key role in the process of pilots training; it enables pilots to control the aircraft and its equipment. Standard computer with a graphic processing unit for the visualization results from continuous mathematical models of an aircraft can be utilized

A water tunnel flow visualization study of the vortex flow structures on the F/A-18 aircraft

The vortex flow structures occurring on the F/A-18 aircraft at high angles of attack were studied. A water tunnel was used to gather flow visualization data on the forebody vortex and the wing leading edge extension vortex. The longitudinal location of breakdown of the leading edge vortex was found to be consistently dependent on the angle of attack. Other parameters such as Reynolds number, model scale, and model fidelity had little influence on the overall behavior of the flow structures studied. The lateral location of the forebody vortex system was greatly influenced by changes in the angle of sideslip. Strong interactions can occur between the leading edge extension vortex and the forebody vortex. Close attention was paid to vortex induced flows on various airframe components of the F/A-18. Reynolds number and angle of attack greatly affected the swirling intensity, and therefore the strength of the studied vortices. Water tunnel results on the F/A-18 correlated well with those obtained in similar studies at both full and sub scale levels. The water tunnel can provide, under certain conditions, good simulations of realistic flows in full scale configurations

Simulation study of helicopter ship landing procedures incoporating measured flow data

The aim of this article is to investigate the use of inverse simulation to help identify those regions of a ship's flight deck which provide the safest locations for landing a rotorcraft in various atmospheric conditions. This requires appropriate information on the wind loading conditions around a ship deck and superstructure, and for the current work, these data were obtained from wind tunnel tests of a ship model representative of a typical helicopter carrier/assault ship. A series of wind tunnel tests were carried out on the model in the University of Glasgow's 2.65 × 2.04 m wind tunnel and three-axis measurements of wind speed were made at various locations on the ship deck. Measurements were made at four locations on the flight deck at three different heights. The choice of these locations was made on the basis of preliminary flow visualization tests which highlighted the areas where the most severe wind effects were most likely to occur. In addition, for the case where the wind was from 30 to starboard, measurements were made at three further locations to assess the extent of the wake of the superstructure. The generated wind profiles can then be imposed on the inverse simulation, allowing study of the vehicle and pilot response during a typical landing manoeuvre in these conditions. The power of the inverse simulation for this application is demonstrated by a series of simulations performed using configurational data representing two aircraft types, a Westland Lynx and a transport helicopter flying an approach and landing manoeuvre with the worst atmospheric conditions applied. It is shown from the results that attempting to land in the area aft of the superstructure in a 30° crosswind might lead to problems for the transport configuration due to upgusts in this area. Attempting to perform the landing manoeuvre in an aggressive manner is also shown to lead to diminished control margin in higher winds

Visualization of leading edge vortices on a series of flat plate delta wings

A summary of flow visualization data obtained as part of NASA Grant NAG2-258 is presented. During the course of this study, many still and high speed motion pictures were taken of the leading edge vortices on a series of flat plate delta wings at varying angles of attack. The purpose is to present a systematic collection of photographs showing the state of vortices as a function of the angle of attack for the four models tested

Flow visualization and flow field measurements of a 1/12 scale tilt rotor aircraft in hover

The results are given of flow visualization studies and inflow velocity field measurements performed on a 1/12 scale model of the XV-15 tilt rotor aircraft in the hover mode. The complex recirculating flow due to the rotor-wake-body interactions characteristic of tilt rotors was studied visually using neutrally buoyant soap bubbles and quantitatively using hot wire anemometry. Still and video photography were used to record the flow patterns. Analysis of the photos and video provided information on the physical dimensions of the recirculating fountain flow and on details of the flow including the relative unsteadiness and turbulence characteristics of the flow. Recirculating flows were also observed along the length of the fuselage. Hot wire anemometry results indicate that the wing under the rotor acts to obstruct the inflow causing a deficit in the inflow velocities over the inboard region of the model. Hot wire anemometry also shows that the turbulence intensities in the inflow are much higher in the recirculating fountain reingestion zone

Experimental study of the flight envelope and research of safety requirements for hang-gliders

The flight mechanic computations were computed, providing both the flight envelopes with all sorts of limits and a fairly precise idea of the influence of several parameters, such as pilot's weight, wing settings, aeroelasticity, etc... The particular problem of luffing dives was thoroughly analyzed, and two kinds of causes were exhibited in both the rules of luffing and aeroelastic effects. The general analysis of longitudinal stability showed a strong link with fabric tension, as expected through Nielsen's and Twaites' theory. Fabric tension strongly depending upon aeroelasticity, that parameter was found to be the most effective design one for positive stability. Lateral stability was found to be very similar in all gliders except perhaps the cylindro-conical. The loss of stability happens in roll at low angle of attack, whereas it happens in yaw at high angle. Turning performance was a bit suprising, with a common maximum value of approximately 55 deg of bank angle for a steady turn

In-flight flow visualization characteristics of the NASA F-18 high alpha research vehicle at high angles of attack

Surface and off-surface flow visualization techniques were used to visualize the 3-D separated flows on the NASA F-18 high alpha research vehicle at high angles of attack. Results near the alpha = 25 to 26 deg and alpha = 45 to 49 deg are presented. Both the forebody and leading edge extension (LEX) vortex cores and breakdown locations were visualized using smoke. Forebody and LEX vortex separation lines on the surface were defined using an emitted fluid technique. A laminar separation bubble was also detected on the nose cone using the emitted fluid technique and was similar to that observed in the wind tunnel test, but not as extensive. Regions of attached, separated, and vortical flow were noted on the wing and the leading edge flap using tufts and flow cones, and compared well with limited wind tunnel results

Vortical Flows Research Program of the Fluid Dynamics Research Branch

The research interests of the staff of the Fluid Dynamics Research Branch in the general area of vortex flows are summarized. A major factor in the development of enchanced maneuverability and reduced drag by aerodynamic means is the use of effective vortex control devices. The key to control is the use of emerging computational tools for predicting viscous fluid flow in close coordination with fundamental experiments. In fact, the extremely complex flow fields resulting from numerical solutions to boundary value problems based on the Navier-Stokes equations requires an intimate relationship between computation and experiment. The field of vortex flows is important in so many practical areas that a concerted effort in this area is justified. A brief background of the research activity undertaken is presented, including a proposed classification of the research areas. The classification makes a distinction between issues related to vortex formation and structure, and work on vortex interactions and evolution. Examples of current research results are provided, along with references where available. Based upon the current status of research and planning, speculation on future research directions of the group is also given

The F-18 High Alpha Research Vehicle: A High-Angle-of-Attack Testbed Aircraft

The F-18 High Alpha Research Vehicle is the first thrust-vectoring testbed aircraft used to study the aerodynamics and maneuvering available in the poststall flight regime and to provide the data for validating ground prediction techniques. The aircraft includes a flexible research flight control system and full research instrumentation. The capability to control the vehicle at angles of attack up to 70 degrees is also included. This aircraft was modified by adding a pitch and yaw thrust-vectoring system. No significant problems occurred during the envelope expansion phase of the program. This aircraft has demonstrated excellent control in the wing rock region and increased rolling performance at high angles of attack. Initial pilot reports indicate that the increased capability is desirable although some difficulty in judging the size and timing of control inputs was observed. The aircraft, preflight ground testing and envelope expansion flight tests are described

Computational Study of a Generic T-tail Transport

This paper presents a computational study on the static and dynamic stability characteristics of a generic transport T-tail configuration under a NASA research program to improve stall models for civil transports. The NASA Tetrahedral Unstructured Software System (TetrUSS) was used to obtain both static and periodic dynamic solutions at low speed conditions for three Reynolds number conditions up to 60 deg angle of attack. The computational results are compared to experimental data. The dominant effects of Reynolds number for the static conditions were found to occur in the stall region. The pitch and roll damping coefficients compared well to experimental results up to up to 40 deg angle of attack whereas yaw damping coefficient agreed only up to 20 deg angle of attack