Algorithms for advance bandwidth reservation in media production networks

Media production generally requires many geographically distributed actors (e.g., production houses, broadcasters, advertisers) to exchange huge amounts of raw video and audio data. Traditional distribution techniques, such as dedicated point-to-point optical links, are highly inefficient in terms of installation time and cost. To improve efficiency, shared media production networks that connect all involved actors over a large geographical area, are currently being deployed. The traffic in such networks is often predictable, as the timing and bandwidth requirements of data transfers are generally known hours or even days in advance. As such, the use of advance bandwidth reservation (AR) can greatly increase resource utilization and cost efficiency. In this paper, we propose an Integer Linear Programming formulation of the bandwidth scheduling problem, which takes into account the specific characteristics of media production networks, is presented. Two novel optimization algorithms based on this model are thoroughly evaluated and compared by means of in-depth simulation results

OpenEPC Integration within 5GTN as an NFV proof of concept

Abstract. Gone are the days, when a hardware is changed on every malfunctioning and the whole operation either stays down or load on the replacing hardware becomes too much which ultimately compromises the QoS. The IT industry is mature enough to tackle problems regarding scalability, space utilization, energy consumption, cost, agility and low availability. The expected throughput and network latency with 5G in the cellular Telecommunication Networks seems to be unachievable with the existing architecture and resources. Network Function Virtualization promises to merge IT and Telecommunications in such an efficient way that the expected results could be achieved no longer but sooner. The thesis work examines the compatibility and flexibility of a 3GPP virtual core network in a virtualization platform. The testbed is established on an LTE (Long Term Evolution) based network being already deployed and OpenEPC is added as virtual core network on it. The integration of OpenEPC in 5GTN (5TH Generation Test Network) is discussed in details in the thesis which will give an account of the possibility of implementing such a simulated vEPC (Virtual Evolved Packet Core) in a real network platform. The deployed setup is tested to check its feasibility and flexibility for a platform which could be used for NFV deployment in future. The monitoring of OpenEPC’s individual components while utilizing the major resources within them, forms the primary performance test. The CPU Load and Memory Utilization is tested on different CPU stress levels having a constant data traffic from actual UEs. At the completion of the thesis work, a consensus is built up based on the test results that the test setup can hold number of subscribers to a certain amount without any performance degradation. Moreover, the virtual core network throughput and network latency is also compared to the commercial LTE networks and theoretical maximum values on similar resources to check performance consistency OpenEPC must offer

Elastic Highly Available Cloud Computing

High availability and elasticity are two the cloud computing services technical features. Elasticity is a key feature of cloud computing where provisioning of resources is closely tied to the runtime demand. High availability assure that cloud applications are resilient to failures. Existing cloud solutions focus on providing both features at the level of the virtual resource through virtual machines by managing their restart, addition, and removal as needed. These existing solutions map applications to a specific design, which is not suitable for many applications especially virtualized telecommunication applications that are required to meet carrier grade standards. Carrier grade applications typically rely on the underlying platform to manage their availability by monitoring heartbeats, executing recoveries, and attempting repairs to bring the system back to normal. Migrating such applications to the cloud can be particularly challenging, especially if the elasticity policies target the application only, without considering the underlying platform contributing to its high availability (HA). In this thesis, a Network Function Virtualization (NFV) framework is introduced; the challenges and requirements of its use in mobile networks are discussed. In particular, an architecture for NFV framework entities in the virtual environment is proposed. In order to reduce signaling traffic congestion and achieve better performance, a criterion to bundle multiple functions of virtualized evolved packet-core in a single physical device or a group of adjacent devices is proposed. The analysis shows that the proposed grouping can reduce the network control traffic by 70 percent. Moreover, a comprehensive framework for the elasticity of highly available applications that considers the elastic deployment of the platform and the HA placement of the application’s components is proposed. The approach is applied to an internet protocol multimedia subsystem (IMS) application and demonstrate how, within a matter of seconds, the IMS application can be scaled up while maintaining its HA status

A software-defined architecture for next-generation cellular networks

In the recent years, mobile cellular networks are undergoing fundamental changes and many established concepts are being revisited. New emerging paradigms, such as Software-Defined Networking (SDN), Mobile Cloud Computing (MCC), Network Function Virtualization (NFV), Internet of Things (IoT),and Mobile Social Networking (MSN), bring challenges in the design of cellular networks architectures. Current Long-Term Evolution (LTE) networks are not able to accommodate these new trends in a scalable and efficient way. In this paper, first we discuss the limitations of the current LTE architecture. Second, driven by the new communication needs and by the advances in aforementioned areas, we propose a new architecture for next generation cellular networks. Some of its characteristics include support for distributed content routing, Heterogeneous Networks(HetNets) and multiple Radio Access Technologies (RATs). Finally, we present simulation results which show that significant backhaul traffic savings can be achieved by implementing caching and routing functions at the network edge

Opaque Service Virtualisation: A Practical Tool for Emulating Endpoint Systems

Large enterprise software systems make many complex interactions with other services in their environment. Developing and testing for production-like conditions is therefore a very challenging task. Current approaches include emulation of dependent services using either explicit modelling or record-and-replay approaches. Models require deep knowledge of the target services while record-and-replay is limited in accuracy. Both face developmental and scaling issues. We present a new technique that improves the accuracy of record-and-replay approaches, without requiring prior knowledge of the service protocols. The approach uses Multiple Sequence Alignment to derive message prototypes from recorded system interactions and a scheme to match incoming request messages against prototypes to generate response messages. We use a modified Needleman-Wunsch algorithm for distance calculation during message matching. Our approach has shown greater than 99% accuracy for four evaluated enterprise system messaging protocols. The approach has been successfully integrated into the CA Service Virtualization commercial product to complement its existing techniques.Comment: In Proceedings of the 38th International Conference on Software Engineering Companion (pp. 202-211). arXiv admin note: text overlap with arXiv:1510.0142

Network Function Virtualization: Mitigating the Impact of VoLTE on the Policy and the Charging System, Journal of Telecommunications and Information Technology, 2016, nr 2

Needless to say that telecommunications’ operators are showing increasing interests toward solving the dilemma of optimizing network resources while offering state-of-the-art quality of service. Recently, operators have shown an increasing interest to investigate solutions for better control on network utilization, service usage and monetization. They also noticed a significant growth in Diameter signaling and more specifically in signaling related to policy management. A massive introduction of Voice over LTE (VoLTE) service will have a significant impact on the systems handling policy signaling, as VoLTE will reshape the landscape of Long Term Evolution (LTE) policies and completely change the way policy management works. However, this massive approach is meant to provide significant competitive advantages for operators offering LTE services and still require circuit-switched network to provide voice service. The biggest challenge for those operators is to find an appropriate solution, scalable enough to handle the unpredictable growth of Diameter signaling. In this paper, a model, based on Network Function Virtualization (NFV) technology is proposed, able to address the challenges of massively introducing VoLTE, without impacting existing services and without jeopardizing current revenues. In presented approach, the standard VoLTE call flows, referenced user’s behavior and latest experiments’ results on NFV technology are used

A Latency-driven Availability Assessment for Multi-Tenant Service Chains

Nowadays, most telecommunication services adhere to the Service Function Chain (SFC) paradigm, where network functions are implemented via software. In particular, container virtualization is becoming a popular approach to deploy network functions and to enable resource slicing among several tenants. The resulting infrastructure is a complex system composed by a huge amount of containers implementing different SFC functionalities, along with different tenants sharing the same chain. The complexity of such a scenario lead us to evaluate two critical metrics: the steady-state availability (the probability that a system is functioning in long runs) and the latency (the time between a service request and the pertinent response). Consequently, we propose a latency-driven availability assessment for multi-tenant service chains implemented via Containerized Network Functions (CNFs). We adopt a multi-state system to model single CNFs and the queueing formalism to characterize the service latency. To efficiently compute the availability, we develop a modified version of the Multidimensional Universal Generating Function (MUGF) technique. Finally, we solve an optimization problem to minimize the SFC cost under an availability constraint. As a relevant example of SFC, we consider a containerized version of IP Multimedia Subsystem, whose parameters have been estimated through fault injection techniques and load tests

Towards a Cyber-Physical Manufacturing Cloud through Operable Digital Twins and Virtual Production Lines

In last decade, the paradigm of Cyber-Physical Systems (CPS) has integrated industrial manufacturing systems with Cloud Computing technologies for Cloud Manufacturing. Up to 2015, there were many CPS-based manufacturing systems that collected real-time machining data to perform remote monitoring, prognostics and health management, and predictive maintenance. However, these CPS-integrated and network ready machines were not directly connected to the elements of Cloud Manufacturing and required human-in-the-loop. Addressing this gap, we introduced a new paradigm of Cyber-Physical Manufacturing Cloud (CPMC) that bridges a gap between physical machines and virtual space in 2017. CPMC virtualizes machine tools in cloud through web services for direct monitoring and operations through Internet. Fundamentally, CPMC differs with contemporary modern manufacturing paradigms. For instance, CPMC virtualizes machining tools in cloud using remote services and establish direct Internet-based communication, which is overlooked in existing Cloud Manufacturing systems. Another contemporary, namely cyber-physical production systems enable networked access to machining tools. Nevertheless, CPMC virtualizes manufacturing resources in cloud and monitor and operate them over the Internet. This dissertation defines the fundamental concepts of CPMC and expands its horizon in different aspects of cloud-based virtual manufacturing such as Digital Twins and Virtual Production Lines. Digital Twin (DT) is another evolving concept since 2002 that creates as-is replicas of machining tools in cyber space. Up to 2018, many researchers proposed state-of-the-art DTs, which only focused on monitoring production lifecycle management through simulations and data driven analytics. But they overlooked executing manufacturing processes through DTs from virtual space. This dissertation identifies that DTs can be made more productive if they engage directly in direct execution of manufacturing operations besides monitoring. Towards this novel approach, this dissertation proposes a new operable DT model of CPMC that inherits the features of direct monitoring and operations from cloud. This research envisages and opens the door for future manufacturing systems where resources are developed as cloud-based DTs for remote and distributed manufacturing. Proposed concepts and visions of DTs have spawned the following fundamental researches. This dissertation proposes a novel concept of DT based Virtual Production Lines (VPL) in CPMC in 2019. It presents a design of a service-oriented architecture of DTs that virtualizes physical manufacturing resources in CPMC. Proposed DT architecture offers a more compact and integral service-oriented virtual representations of manufacturing resources. To re-configure a VPL, one requirement is to establish DT-to-DT collaborations in manufacturing clouds, which replicates to concurrent resource-to-resource collaborations in shop floors. Satisfying the above requirements, this research designs a novel framework to easily re-configure, monitor and operate VPLs using DTs of CPMC. CPMC publishes individual web services for machining tools, which is a traditional approach in the domain of service computing. But this approach overcrowds service registry databases. This dissertation introduces a novel fundamental service publication and discovery approach in 2020, OpenDT, which publishes DTs with collections of services. Experimental results show easier discovery and remote access of DTs while re-configuring VPLs. Proposed researches in this dissertation have received numerous citations both from industry and academia, clearly proving impacts of research contributions