14,213 research outputs found
Biped robot walking control on inclined planes with fuzzy parameter adaptation
The bipedal structure is suitable for a robot functioning in the human environment, and assuming assistive roles. However, the bipedal walk is a poses a difficult control problem. Walking on even floor is not satisfactory for the applicability of a humanoid robot. This paper presents a study on bipedal walk on inclined planes. A Zero Moment Point (ZMP) based reference generation technique is employed. The orientation of the upper body is adjusted online by a fuzzy logic system to adapt to different walking surface slopes. This system uses a sampling time larger than the one of the joint space position controllers. A newly defined measure of the oscillatory behavior of the body pitch angle and the average value of the pelvis pitch angle are used as inputs to the fuzzy adaptation system. A 12-degrees-of-freedom (DOF) biped robot model is used in the full-dynamics 3-D simulations. Simulations are carried out on even floor and inclined planes with different slopes. The results indicate that the fuzzy adaptation algorithms presented are successful in enabling the robot to climb slopes of 5.6 degrees (10 percent)
Real-time evolution of an embedded controller for an autonomous helicopter
In this paper we evolve the parameters of a proportional, integral, and derivative (PID) controller for an unstable, complex and nonlinear system. The individuals of the applied genetic algorithm (GA) are evaluated on the actual system rather than on a simulation of it, thus avoiding the ldquoreality gaprdquo. This makes implicit a formal model identification for the implementation of a simulator. This also calls for the GA to be approached in an unusual way, where we need to consider new aspects not normally present in the usual situations using an unnaturally consistent simulator for fitness evaluation. Although elitism is used in the GAs, no monotonic increase in fitness is exhibited by the algorithm. Instead, we show that the GApsilas individuals converge towards more robust solutions
A reusable iterative optimization software library to solve combinatorial problems with approximate reasoning
Real world combinatorial optimization problems such as scheduling are
typically too complex to solve with exact methods. Additionally, the problems
often have to observe vaguely specified constraints of different importance,
the available data may be uncertain, and compromises between antagonistic
criteria may be necessary. We present a combination of approximate reasoning
based constraints and iterative optimization based heuristics that help to
model and solve such problems in a framework of C++ software libraries called
StarFLIP++. While initially developed to schedule continuous caster units in
steel plants, we present in this paper results from reusing the library
components in a shift scheduling system for the workforce of an industrial
production plant.Comment: 33 pages, 9 figures; for a project overview see
http://www.dbai.tuwien.ac.at/proj/StarFLIP
The application of a new PID autotuning method for the steam/water loop in large scale ships
In large scale ships, the most used controllers for the steam/water loop are still the proportional-integral-derivative (PID) controllers. However, the tuning rules for the PID parameters are based on empirical knowledge and the performance for the loops is not satisfying. In order to improve the control performance of the steam/water loop, the application of a recently developed PID autotuning method is studied. Firstly, a 'forbidden region' on the Nyquist plane can be obtained based on user-defined performance requirements such as robustness or gain margin and phase margin. Secondly, the dynamic of the system can be obtained with a sine test around the operation point. Finally, the PID controller's parameters can be obtained by locating the frequency response of the controlled system at the edge of the 'forbidden region'. To verify the effectiveness of the new PID autotuning method, comparisons are presented with other PID autotuning methods, as well as the model predictive control. The results show the superiority of the new PID autotuning method
Recommended from our members
Artificial Immune Systems - Models, algorithms and applications
Copyright © 2010 Academic Research Publishing Agency.This article has been made available through the Brunel Open Access Publishing Fund.Artificial Immune Systems (AIS) are computational paradigms that belong to the computational intelligence family and are inspired by the biological immune system. During the past decade, they have attracted a lot of interest from researchers aiming to develop immune-based models and techniques to solve complex computational or engineering problems. This work presents a survey of existing AIS models and algorithms with a focus on the last five years.This article is available through the Brunel Open Access Publishing Fun
An Incremental Construction of Deep Neuro Fuzzy System for Continual Learning of Non-stationary Data Streams
Existing FNNs are mostly developed under a shallow network configuration
having lower generalization power than those of deep structures. This paper
proposes a novel self-organizing deep FNN, namely DEVFNN. Fuzzy rules can be
automatically extracted from data streams or removed if they play limited role
during their lifespan. The structure of the network can be deepened on demand
by stacking additional layers using a drift detection method which not only
detects the covariate drift, variations of input space, but also accurately
identifies the real drift, dynamic changes of both feature space and target
space. DEVFNN is developed under the stacked generalization principle via the
feature augmentation concept where a recently developed algorithm, namely
gClass, drives the hidden layer. It is equipped by an automatic feature
selection method which controls activation and deactivation of input attributes
to induce varying subsets of input features. A deep network simplification
procedure is put forward using the concept of hidden layer merging to prevent
uncontrollable growth of dimensionality of input space due to the nature of
feature augmentation approach in building a deep network structure. DEVFNN
works in the sample-wise fashion and is compatible for data stream
applications. The efficacy of DEVFNN has been thoroughly evaluated using seven
datasets with non-stationary properties under the prequential test-then-train
protocol. It has been compared with four popular continual learning algorithms
and its shallow counterpart where DEVFNN demonstrates improvement of
classification accuracy. Moreover, it is also shown that the concept drift
detection method is an effective tool to control the depth of network structure
while the hidden layer merging scenario is capable of simplifying the network
complexity of a deep network with negligible compromise of generalization
performance.Comment: This paper has been published in IEEE Transactions on Fuzzy System
Fuzzy Controlled THD Reduction and Performance Improvement of a PMBLDC Motor Using MMLI
In this study, an improved chopper is implemented for current extraction, enhanced solar power generation control, and increased voltage. A simplified space vector control technique is applied to operate the permanent-magnet brushless DC drive (PMBLDC) by controlling the inverter operation. This is used as a special electrical machine with reliable operation and maintenance control. This system uses the Perturb and observer (P&O) algorithm which maximises the PV-system output power and reduces the overall cost. A fuzzy logic controller (FLC) is used to control the duty cycle and increase the PV voltage. The modified multilevel inverter (MMLI) reduces harmonic distortions and low-switching losses by using a self-tuning filter (STF). This study achieved a better PMBLDC system performance, an improved efficiency, and eliminated the total harmonic distortion (THD) by the self-tuning filter with and without using MATLAB/SIMULINK
- …