A highly optimized vectorized code for Monte Carlo simulations of SU(3) lattice gauge theories

New methods are introduced for improving the performance of the vectorized Monte Carlo SU(3) lattice gauge theory algorithm using the CDC CYBER 205. Structure, algorithm and programming considerations are discussed. The performance achieved for a 16(4) lattice on a 2-pipe system may be phrased in terms of the link update time or overall MFLOPS rates. For 32-bit arithmetic, it is 36.3 microsecond/link for 8 hits per iteration (40.9 microsecond for 10 hits) or 101.5 MFLOPS

Load flow studies on stand alone microgrid system in Ranau, Sabah

This paper presents the power flow or load flow analysis of Ranau microgrid, a standalone microgrid in the district of Ranau,West Coast Division of Sabah. Power flow for IEEE 9 bus also performed and analyzed. Power flow is define as an important tool involving numerical analysis applied to power system. Power flow uses simplified notation such as one line diagram and per-unit system focusing on voltages, voltage angles, real power and reactive power. To achieved that purpose, this research is done by analyzing the power flow analysis and calculation of all the elements in the microgrid such as generators, buses, loads, transformers, transmission lines using the Power Factory DIGSilent 14 software to calculate the power flow. After the analysis and calculations, the results were analysed and compared

A Scalable Correlator Architecture Based on Modular FPGA Hardware, Reuseable Gateware, and Data Packetization

A new generation of radio telescopes is achieving unprecedented levels of sensitivity and resolution, as well as increased agility and field-of-view, by employing high-performance digital signal processing hardware to phase and correlate large numbers of antennas. The computational demands of these imaging systems scale in proportion to BMN^2, where B is the signal bandwidth, M is the number of independent beams, and N is the number of antennas. The specifications of many new arrays lead to demands in excess of tens of PetaOps per second. To meet this challenge, we have developed a general purpose correlator architecture using standard 10-Gbit Ethernet switches to pass data between flexible hardware modules containing Field Programmable Gate Array (FPGA) chips. These chips are programmed using open-source signal processing libraries we have developed to be flexible, scalable, and chip-independent. This work reduces the time and cost of implementing a wide range of signal processing systems, with correlators foremost among them,and facilitates upgrading to new generations of processing technology. We present several correlator deployments, including a 16-antenna, 200-MHz bandwidth, 4-bit, full Stokes parameter application deployed on the Precision Array for Probing the Epoch of Reionization.Comment: Accepted to Publications of the Astronomy Society of the Pacific. 31 pages. v2: corrected typo, v3: corrected Fig. 1

Designing Open and Distance Learning for Teacher Education in Sub-Saharan Africa: A toolkit for educators and planners

Everyone remembers a good teacher. Good teachers are the key to educational expansion and improvement. In many countries in Sub-Saharan Africa, there is an urgent need to expand the number of primary and secondary teachers. In all African countries, there is an equally important need to improve the quality of teaching. To achieve this, it is clear that new approaches to teacher education are essential. Existing institutions of teacher education will continue to play an important role, but, alone, they will not meet the goals of Education for All (EFA) by 2015. It is fortunate that, just as the twin needs to improve the quantity and quality of teachers become imperative, so new forms of education and training are becoming available. The world is witnessing a revolution in information and communication technologies (ICTs), which can offer training and support of a type and at a cost hitherto impossible to consider, and thus, must be fully explored given the scale and urgency of demand. In doing so, however, it will be necessary to build on existing and well-tested strategies, including the best models of open and distance learning. This toolkit is the third in a series of recent publications by the Africa Region Human Development Department of the World Bank to share knowledge and experience on how distance education and ICTs can support education in Sub-Saharan Africa. It emphasizes the rigorous process by which new forms of distance-education programs for teacher education can be planned and implemented. The best models of established programs are considered along with the potential for incorporating, as the means become available, new modes of communication. Most forms of teacher education, particularly those concerned with qualification upgrading and ongoing professional development, will have to be based in schools. The authors demonstrate how school-based programs, appropriately resourced and supported, have the potential not only to raise significantly the number and quality of teachers, but also to improve classroom practice and school organization, generally. The guidance and advice, which is drawn from many years of experience in design and implementation, and embraces a range of case studies from across the region, will be of considerable value to those preparing new policies and programs of teacher education and to those seeking to improve existing programs

MANAGING KNOWLEDGE AND DATA FOR A BETTER DECISION IN PUBLIC ADMINISTRATION

In the current context, the society is dominated by the rapid development of computer networks and the integration of services and facilities offered by the Internet environment at the organizational level. The success of an organization depends largely on the quality and quantity of information it has available to develop quickly decisions able to meet the current needs. The need for a collaborative environment within the central administration leads to the unification of resources and instruments around the Center of Government, to increase both the quality and efficiency of decision - making, especially reducing the time spent with decision - making, and upgrading the decision – making act.administration, strategy, decision, complex systems, management, infrastructure, e-government, information society, government platform.

An Economic analysis of the potential for precision farming in UK cereal production

The results from alternative spatial nitrogen application studies are analysed in economic terms and compared to the costs of precision farming hardware, software and other services for cereal crops in the UK. At current prices, the benefits of variable rate application of nitrogen exceed the returns from a uniform application by an average of £22 ha−1 The cost of the precision farming systems range from £5 to £18 ha−1 depending upon the system chosen for an area of 250 ha. The benefits outweigh the associated costs for cereal farms in excess of 80 ha for the lowest price system to 200–300 ha for the more sophisticated systems. The scale of benefits obtained depends upon the magnitude of the response to the treatment and the proportion of the field that will respond. To be cost effective, a farmed area of 250 ha of cereals, where 30% of the area will respond to variable treatment, requires an increase in crop yield in the responsive areas of between 0·25 and 1.00 t ha−1 (at £65 t−1) for the basic and most expensive precision farming systems, respectively

The electronics industry in central and eastern Europe: an emerging production location in the alignment of networks perspective

This paper analyses the emergence of central Europe as a new location for the production of electronics. The main factors that drive integration in the region into global production networks are also analysed, as well as prospects for upgrading the industry by using network alignment perspectives. Foreign investment is the primary vehicle of integration of CEE electronics firms into global production networks, and Hungary has moved furthest along this path, positioning itself as a major low-cost supply base in the region. Czech and Polish electronics industries are connected, in smaller, but increasing, degrees to international electronics production networks. Networks that are being built in CEE in electronics are usually confined to subsidiaries with still limited local subcontracting; they are export-oriented and are expanding. Local subsidiaries have mastered production capabilities and several subsidiaries in Hungary are European mandate suppliers in their respective lines of business. EU demand is the main pull factor, which gives cohesion to the actions of MNCs as well as to the action of local and national governments in CEE. The layer of local firms is still very weak with very limited capabilities in core technologies. This is the key weakness which prevents further alignment of networks in CEE electronics. Local governments play an important role in working jointly with foreign investors in establishing industrial parks and new capacities