Hardware schemes for early register release

Register files are becoming one of the critical components of current out-of-order processors in terms of delay and power consumption, since their potential to exploit instruction-level parallelism is quite related to the size and number of ports of the register file. In conventional register renaming schemes, register releasing is conservatively done only after the instruction that redefines the same register is committed. Instead, we propose a scheme that releases registers as soon as the processor knows that there will be no further use of them. We present two early releasing hardware implementations with different performance/complexity trade-offs. Detailed cycle-level simulations show either a significant speedup for a given register file size, or a reduction in register file size for a given performance level.Peer ReviewedPostprint (published version

A VHDL model of a superscalar implementation of the DLX instruction set architcture

The complexity of today\u27s microprocessors demands that designers have an extensive knowledge of superscalar design techniques; this knowledge is difficult to acquire outside of a professional design team. Presently, there are a limited number of adequate resources available for the student, both in textual and model form. The limited number of options available emphasizes the need for more models and simulators, allowing students the opportunity to learn more about superscalar designs prior to entering the work force. This thesis details the design and implementation of a superscalar version of the DLX instruction set architecture in behavioral VHDL. The branch prediction strategy, instruction issue model, and hazard avoidance techniques are all issues critical to superscalar processor design and are studied in this thesis. Preliminary test results demonstrate that the performance advantage of the superscalar processor is applicable even to short test sequences. Initial findings have shown a performance improvement of 26% to 57% for instruction sequences under 150 instructions

Investigation of a simultaneous multithreaded architecture

Many enhancements have been made to the traditional general purpose load-store computer architectures. Among the enhancements are memory hierarchy improvements, branch prediction, and multiple issue processors. A major problem that exists with current microprocessor design is the disparity in the much larger increase in speed of the CPU versus the moderate increase in speed accessing main memory. The simultaneous multithreaded architecture is an extension of the single-threaded architecture that helps hide the performance penalty created by long-latency instructions, branch mispredictions, and memory accesses. Simultaneous multithreaded architectures use a more flexible parallelism, which takes advantage of both instruction-level, and thread-level parallelism. The goal of this project was to design, simulate, and analyze a model of a simultaneous multithreaded architecture in order to evaluate design alternatives. The simulator was created by modifying a version of the Simple Scalar toolset, developed at the University of Wisconsin. The simulations provide documentation for an overall system performance improvement of a simulta neous multithreaded architecture. In early simulation results, performed with the same number of functional units, an improvement in the number of instructions per cycle (IPC) of between 43% and 58% was found using four threads versus a single thread. The horizontal waste rate, which measures the number of unused issue slots, was reduced between 35% and 46%. The vertical waste rate, which measures the percentage- of unused issue cycles (no issue slots used in a cycle), was reduced between 46% and 61%. These results are derived from a set of four sample programs. It was also found that increasing the number of certain functional units did not improve performance, whereas increasing the number of other types of functional units did have a significant positive impact on performance

A distributed processor state management architecture for large-window processors

Processor architectures with large instruction windows have been proposed to expose more instruction-level parallelism (ILP) and increase performance. Some of the proposed architectures replace a re-order buffer (ROB) with a check-pointing mechanism and an out-of-order release of processor resources. Check-pointing, however, leads to an imprecise processor state recovery on mis-predicted branches and exceptions and re-execution of correct-path instructions after state recovery. It also requires large register files complicating renaming, allocation and release of physical registers. This paper proposes a new processor architecture called a Multi-State Processor (MSP). The MSP does not use check-pointing, avoids the above-mentioned problems, and has a fast, distributed state recovery mechanism. The MSP uses a novel register management architecture allowing implementation of large register files with simpler and more scalable register allocation, renaming, and release. It is also key to precise processor state recovery mechanism. The MSP is shown to improve IPC by 14%, on average, for integer SPEC CPU2000 benchmarks compared to a check-pointing based mechanism ([2]) when a fast and simple branch predictor is used. With a very aggressive branch predictor the IPC improvement is 1%, on average, and 3% if some of the programs are optimized for the MSP. The MSP also reduces the average number of executed instructions by 16.5% (12% for the aggressive branch predictor), mostly due to precise state recovery. This improves the MSP processor energy efficiency even though it uses a larger register file.Peer ReviewedPostprint (published version

Exploiting Fine-Grain Concurrency Analytical Insights in Superscalar Processor Design

This dissertation develops analytical models to provide insight into various design issues associated with superscalar-type processors, i.e., the processors capable of executing multiple instructions per cycle. A survey of the existing machines and literature has been completed with a proposed classification of various approaches for exploiting fine-grain concurrency. Optimization of a single pipeline is discussed based on an analytical model. The model-predicted performance curves are found to be in close proximity to published results using simulation techniques. A model is also developed for comparing different branch strategies for single-pipeline processors in terms of their effectiveness in reducing branch delay. The additional instruction fetch traffic generated by certain branch strategies is also studied and is shown to be a useful criterion for choosing between equally well performing strategies. Next, processors with multiple pipelines are modelled to study the tradeoffs associated with deeper pipelines versus multiple pipelines. The model developed can reveal the cause of performance bottleneck: insufficient resources to exploit discovered parallelism, insufficient instruction stream parallelism, or insufficient scope of concurrency detection. The cost associated with speculative (i.e., beyond basic block) execution is examined via probability distributions that characterize the inherent parallelism in the instruction stream. The throughput prediction of the analytic model is shown, using a variety of benchmarks, to be close to the measured static throughput of the compiler output, under resource and scope constraints. Further experiments provide misprediction delay estimates for these benchmarks under scope constraints, assuming beyond-basic-block, out-of-order execution and run-time scheduling. These results were derived using traces generated by the Multiflow TRACE SCHEDULING™(*) compacting C and FORTRAN 77 compilers. A simplified extension to the model to include multiprocessors is also proposed. The extended model is used to analyze combined systems, such as superpipelined multiprocessors and superscalar multiprocessors, both with shared memory. It is shown that the number of pipelines (or processors) at which the maximum throughput is obtained is increasingly sensitive to the ratio of memory access time to network access delay, as memory access time increases. Further, as a function of inter-iteration dependency distance, optimum throughput is shown to vary nonlinearly, whereas the corresponding Optimum number of processors varies linearly. The predictions from the analytical model agree with published results based on simulations. (*)TRACE SCHEDULING is a trademark of Multiflow Computer, Inc

An Investigation of thread scheduling heuristics for a simultaneous multithreaded processor

Over the years, the von Neumann model of computing has undergone many enhancements. These changes include an improved memory hierarchy, multiple instruction issue and branch predic tion. Since the model\u27s introduction, the performance of processors has increased at a much greater rate than that of memory. Several modifications to hide this ever widening gap in performance are being examined in current research. A very promising one is the Simultaneous Multithreaded processor. This architecture strives to further reduce the effects of long latency instructions, such as memory accesses, by allowing multiple threads of execution to be active in the processor at the same time. With the introduction of multiple active threads in a single processor, several new aspects of processor operation can have a sizeable effect on performance. One such aspect is how to choose from which thread to fetch instructions during the next cycle. For this project, three different classes of fetch scheduling mechanisms were defined and exam ples of each were either studied or proposed. The proposed mechanisms were then tested using a set of four sample programs by adding the mechanisms to a Simultaneous Multithreading sim ulator based on the Simple Scalar tool set from the University of Wisconsin-Madison. With the proper configuration, each of the proposed mechanisms improved the performance of the simulated architecture. However, the best increase in performance was produced by the Event History Table. It achieved an IPC of 2.0995 for two threads while overriding the primary scheduling mechanism only 0.070% of the time

Banked microarchitectures for complexity-effective superscalar microprocessors

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2006.Includes bibliographical references (p. 95-99).High performance superscalar microarchitectures exploit instruction-level parallelism (ILP) to improve processor performance by executing instructions out of program order and by speculating on branch instructions. Monolithic centralized structures with global communications, including issue windows and register files, are used to buffer in-flight instructions and to maintain machine state. These structures scale poorly to greater issue widths and deeper pipelines, as they must support simultaneous global accesses from all active instructions. The lack of scalability is exacerbated in future technologies, which have increasing global interconnect delay and a much greater emphasis on reducing both switching and leakage power. However, these fully orthogonal structures are over-engineered for typical use. Banked microarchitectures that consist of multiple interleaved banks of fewer ported cells can significantly reduce power, area, and latency of these structures.(cont.) Although banked structures exhibit a minor performance penalty, significant reductions in delay and power can potentially be used to increase clock rate and lead to more complexity-effective designs. There are two main contributions in this thesis. First, a speculative control scheme is proposed to simplify the complicated control logic that is involved in managing a less-ported banked register file for high-frequency superscalar processors. Second, the RingScalar architecture, a complexity-effective out-of-order superscalar microarchitecture, based on a ring topology of banked structures, is introduced and evaluated.by Jessica Hui-Chun Tseng.Ph.D