Loop transformations for clustered VLIW architectures

With increasing demands for performance by embedded systems, especially by digital signal processing (DSP) applications, embedded processors must increase available instructionlevel parallelism (ILP) within significant constraints on power consumption and chip cost. Unfortunately, supporting a large amount of ILP on a processor while maintaining a single register file increases chip cost and potentially decreases overall performance due to increased cycle time. To address this problem, some modern embedded processors partition the register file into multiple low-ported register files, each directly connected with one or more functional units. These functional unit/register file groups are called clusters. Clustered VLIW (very long instruction word) architectures need extra copy operations or delays to transfer values among clusters. To take advantage of clustered architectures, the compiler must expose parallelism for maximal functional-unit utilization, and schedule instructions to reduce intercluster communication overhead. High-level loop transformations offer an excellent opportunity to enhance the abilities of low-level optimizers to generate code for clustered architectures. This dissertation investigates the effects of three loop transformations, i.e., loop fusion, loop unrolling, and unroll-and-jam, on clustered VLIW architectures. The objective is to achieve high performance with low communication overhead. This dissertation discusses the following techniques: Loop Fusion This research examines the impact of loop fusion on clustered architectures. A metric based upon communication costs for guiding loop fusion is developed and tested on DSP benchmarks. Unroll-and-jam and Loop Unrolling A new method that integrates a communication cost model with an integer-optimization problem is developed to determine unroll amounts for loop unrolling and unroll-and-jam automatically for a specific loop on a specific architecture. These techniques have been implemented and tested using DSP benchmarks on simulated, clustered VLIW architectures and a real clustered, embedded processor, the TI TMS320C64X. The results show that the new techniques achieve an average speedup of 1.72-1.89 on five different clustered architectures. These techniques have been implemented and tested using DSP benchmarks on simulated, clustered VLIW architectures and a real clustered, embedded processor, the TI TMS320C64X. The results show that the new techniques achieve an average speedup of 1.72-1.89 on five different clustered architectures

HW/SW mechanisms for instruction fusion, issue and commit in modern u-processors

In this thesis we have explored the co-designed paradigm to show alternative processor design points. Specifically, we have provided HW/SW mechanisms for instruction fusion, issue and commit for modern processors. We have implemented a co-designed virtual machine monitor that binary translates x86 instructions into RISC like micro-ops. Moreover, the translations are stored as superblocks, which are a trace of basic blocks. These superblocks are further optimized using speculative and non-speculative optimizations. Hardware mechanisms exists in-order to take corrective action in case of misspeculations. During the course of this PhD we have made following contributions. Firstly, we have provided a novel Programmable Functional unit, in-order to speed up general-purpose applications. The PFU consists of a grid of functional units, similar to CCA, and a distributed internal register file. The inputs of the macro-op are brought from the Physical Register File to the internal register file using a set of moves and a set of loads. A macro-op fusion algorithm fuses micro-ops at runtime. The fusion algorithm is based on a scheduling step that indicates whether the current fused instruction is beneficial or not. The micro-ops corresponding to the macro-ops are stored as control signals in a configuration. The macro-op consists of a configuration ID which helps in locating the configurations. A small configuration cache is present inside the Programmable Functional unit, that holds these configurations. In case of a miss in the configuration cache configurations are loaded from I-Cache. Moreover, in-order to support bulk commit of atomic superblocks that are larger than the ROB we have proposed a speculative commit mechanism. For this we have proposed a Speculative commit register map table that holds the mappings of the speculatively committed instructions. When all the instructions of the superblock have committed the speculative state is copied to Backend Register Rename Table. Secondly, we proposed a co-designed in-order processor with with two kinds of accelerators. These FU based accelerators run a pair of fused instructions. We have considered two kinds of instruction fusion. First, we fused a pair of independent loads together into vector loads and execute them on vector load units. For the second kind of instruction fusion we have fused a pair of dependent simple ALU instructions and execute them in Interlock Collapsing ALUs (ICALU). Moreover, we have evaluated performance of various code optimizations such as list-scheduling, load-store telescoping and load hoisting among others. We have compared our co-designed processor with small instruction window out-of-order processors. Thirdly, we have proposed a co-designed out-of-order processor. Specifically we have reduced complexity in two areas. First of all, we have co-designed the commit mechanism, that enable bulk commit of atomic superblocks. In this solution we got rid of the conventional ROB, instead we introduce the Superblock Ordering Buffer (SOB). SOB ensures program order is maintained at the granularity of the superblock, by bulk committing the program state. The program state consists of the register state and the memory state. The register state is held in a per superblock register map table, whereas the memory state is held in gated store buffer and updated in bulk. Furthermore, we have tackled the complexity of Out-of-Order issue logic by using FIFOs. We have proposed an enhanced steering heuristic that fixes the inefficiencies of the existing dependence-based heuristic. Moreover, a mechanism to release the FIFO entries earlier is also proposed that further improves the performance of the steering heuristic.En aquesta tesis hem explorat el paradigma de les màquines issue i commit per processadors actuals. Hem implementat una màquina virtual que tradueix binaris x86 a micro-ops de tipus RISC. Aquestes traduccions es guarden com a superblocks, que en realitat no és més que una traça de virtuals co-dissenyades. En particular, hem proposat mecanismes hw/sw per a la fusió d’instruccions, blocs bàsics. Aquests superblocks s’optimitzen utilitzant optimizacions especualtives i d’altres no speculatives. En cas de les optimizations especulatives es consideren mecanismes per a la gestió de errades en l’especulació. Al llarg d’aquesta tesis s’han fet les següents contribucions: Primer, hem proposat una nova unitat functional programmable (PFU) per tal de millorar l’execució d’aplicacions de proposit general. La PFU està formada per un conjunt d’unitats funcionals, similar al CCA, amb un banc de registres intern a la PFU distribuït a les unitats funcionals que la composen. Les entrades de la macro-operació que s’executa en la PFU es mouen del banc de registres físic convencional al intern fent servir un conjunt de moves i loads. Un algorisme de fusió combina més micro-operacions en temps d’execució. Aquest algorisme es basa en un pas de planificació que mesura el benefici de les decisions de fusió. Les micro operacions corresponents a la macro operació s’emmagatzemen com a senyals de control en una configuració. Les macro-operacions tenen associat un identificador de configuració que ajuda a localitzar d’aquestes. Una petita cache de configuracions està present dintre de la PFU per tal de guardar-les. En cas de que la configuració no estigui a la cache, les configuracions es carreguen de la cache d’instruccions. Per altre banda, per tal de donar support al commit atòmic dels superblocks que sobrepassen el tamany del ROB s’ha proposat un mecanisme de commit especulatiu. Per aquest mecanisme hem proposat una taula de mapeig especulativa dels registres, que es copia a la taula no especulativa quan totes les instruccions del superblock han comitejat. Segon, hem proposat un processador en order co-dissenyat que combina dos tipus d’acceleradors. Aquests acceleradors executen un parell d’instruccions fusionades. S’han considerat dos tipus de fusió d’instructions. Primer, combinem un parell de loads independents formant loads vectorials i els executem en una unitat vectorial. Segon, fusionem parells d’instruccions simples d’alu que són dependents i que s’executaran en una Interlock Collapsing ALU (ICALU). Per altra aquestes tecniques les hem evaluat conjuntament amb diverses optimizacions com list scheduling, load-store telescoping i hoisting de loads, entre d’altres. Aquesta proposta ha estat comparada amb un processador fora d’ordre. Tercer, hem proposat un processador fora d’ordre co-dissenyat efficient reduint-ne la complexitat en dos areas principals. En primer lloc, hem co-disenyat el mecanisme de commit per tal de permetre un eficient commit atòmic del superblocks. En aquesta solució hem substituït el ROB convencional, i en lloc hem introduït el Superblock Ordering Buffer (SOB). El SOB manté l’odre de programa a granularitat de superblock. L’estat del programa consisteix en registres i memòria. L’estat dels registres es manté en una taula per superblock, mentre que l’estat de memòria es guarda en un buffer i s’actulitza atòmicament. La segona gran area de reducció de complexitat considerarada és l’ús de FIFOs a la lògica d’issue. En aquest últim àmbit hem proposat una heurística de distribució que solventa les ineficiències de l’heurística basada en dependències anteriorment proposada. Finalment, i junt amb les FIFOs, s’ha proposat un mecanisme per alliberar les entrades de la FIFO anticipadament

Resource efficient processing and communication in sensor/actuator environments

The future of computer systems will not be dominated by personal computer like hardware platforms but by embedded and cyber-physical systems assisting humans in a hidden but omnipresent manner. These pervasive computing devices can, for example, be utilized in the home automation sector to create sensor/ actuator networks supporting the inhabitants of a house in everyday life. The efficient usage of resources is an important topic at design time and operation time of mobile embedded and cyber-physical systems. Therefore, this thesis presents methods which allow an efficient use of energy and processing resources in sensor/actuator networks. These networks comprise different nodes cooperating for a “smart” joint control function. Sensor/actuator nodes are typical cyber-physical systems comprising sensors/actuators and processing and communication components. Processing components of today’s sensor nodes can comprise many-core chips. This thesis introduces new methods for optimizing the code and the application mapping of the aforementioned systems and presents novel results with regard to design space explorations for energy-efficient and embedded many-core systems. The considered many-core systems are graphics processing units. The application code for these graphics processing units is optimized for a particular platform variant with the objectives of minimal energy consumption and/or of minimal runtime. These two objectives are targeted with the utilization of multi-objective optimization techniques. The mapping optimizations are realized by means of multi-objective design space explorations. Furthermore, this thesis introduces new techniques and functions for a resource-efficient middleware design employing service-oriented architectures. Therefore, a service-oriented architecture based middleware framework is presented which comprises a lightweight service orchestration. In addition to that, a flexible resource management mechanism will be introduced. This resource management adapts resource utilization and services to an environmental context and provides methods to reduce the energy consumption of sensor nodes