637 research outputs found
STTAR: A Traffic- and Thermal-Aware Adaptive Routing for 3D Network-on-Chip Systems
Since the three-dimensional Network on Chip (3D NoC) uses through-silicon via technology to connect the chips, each silicon layer is conducted through heterogeneous thermal, and 3D NoC system suffers from thermal problems. To alleviate the seriousness of the thermal problem, the distribution of data packets usually relies on traffic information or historical temperature information. However, thermal problems in 3D NoC cannot be solved only based on traffic or temperature information. Therefore, we propose a Score-Based Traffic- and Thermal-Aware Adaptive Routing (STTAR) that applies traffic load and temperature information to routing. First, the STTAR dynamically adjusts the input and output buffer lengths of each router with traffic load information to limit routing resources in overheated areas and control the rate of temperature rise. Second, STTAR adopts a scoring strategy based on temperature and the number of free slots in the buffer to avoid data packets being transmitted to high-temperature areas and congested areas and to improve the rationality of selecting routing output nodes. In our experiments, the proposed scoring Score-Based Traffic- and Thermal-Aware Adaptive Routing (STTAR) scheme can increase the throughput by about 14.98% to 47.90% and reduce the delay by about 10.80% to 35.36% compared with the previous works
Embedded dynamic programming networks for networks-on-chip
PhD ThesisRelentless technology downscaling and recent technological advancements
in three dimensional integrated circuit (3D-IC) provide a promising
prospect to realize heterogeneous system-on-chip (SoC) and homogeneous
chip multiprocessor (CMP) based on the networks-onchip
(NoCs) paradigm with augmented scalability, modularity and
performance. In many cases in such systems, scheduling and managing
communication resources are the major design and implementation
challenges instead of the computing resources. Past research
efforts were mainly focused on complex design-time or simple heuristic
run-time approaches to deal with the on-chip network resource
management with only local or partial information about the network.
This could yield poor communication resource utilizations and amortize
the benefits of the emerging technologies and design methods.
Thus, the provision for efficient run-time resource management in
large-scale on-chip systems becomes critical. This thesis proposes a
design methodology for a novel run-time resource management infrastructure
that can be realized efficiently using a distributed architecture,
which closely couples with the distributed NoC infrastructure. The
proposed infrastructure exploits the global information and status
of the network to optimize and manage the on-chip communication
resources at run-time.
There are four major contributions in this thesis. First, it presents a
novel deadlock detection method that utilizes run-time transitive closure
(TC) computation to discover the existence of deadlock-equivalence
sets, which imply loops of requests in NoCs. This detection scheme,
TC-network, guarantees the discovery of all true-deadlocks without
false alarms in contrast to state-of-the-art approximation and heuristic
approaches. Second, it investigates the advantages of implementing
future on-chip systems using three dimensional (3D) integration and
presents the design, fabrication and testing results of a TC-network
implemented in a fully stacked three-layer 3D architecture using a
through-silicon via (TSV) complementary metal-oxide semiconductor
(CMOS) technology. Testing results demonstrate the effectiveness
of such a TC-network for deadlock detection with minimal computational
delay in a large-scale network. Third, it introduces an adaptive
strategy to effectively diffuse heat throughout the three dimensional
network-on-chip (3D-NoC) geometry. This strategy employs a dynamic
programming technique to select and optimize the direction of data
manoeuvre in NoC. It leads to a tool, which is based on the accurate
HotSpot thermal model and SystemC cycle accurate model, to simulate
the thermal system and evaluate the proposed approach. Fourth, it
presents a new dynamic programming-based run-time thermal management
(DPRTM) system, including reactive and proactive schemes, to
effectively diffuse heat throughout NoC-based CMPs by routing packets
through the coolest paths, when the temperature does not exceed
chip’s thermal limit. When the thermal limit is exceeded, throttling is
employed to mitigate heat in the chip and DPRTM changes its course
to avoid throttled paths and to minimize the impact of throttling on
chip performance.
This thesis enables a new avenue to explore a novel run-time resource
management infrastructure for NoCs, in which new methodologies
and concepts are proposed to enhance the on-chip networks for
future large-scale 3D integration.Iraqi Ministry of Higher Education and Scientific Research (MOHESR)
A survey on scheduling and mapping techniques in 3D Network-on-chip
Network-on-Chips (NoCs) have been widely employed in the design of
multiprocessor system-on-chips (MPSoCs) as a scalable communication solution.
NoCs enable communications between on-chip Intellectual Property (IP) cores and
allow those cores to achieve higher performance by outsourcing their
communication tasks. Mapping and Scheduling methodologies are key elements in
assigning application tasks, allocating the tasks to the IPs, and organising
communication among them to achieve some specified objectives. The goal of this
paper is to present a detailed state-of-the-art of research in the field of
mapping and scheduling of applications on 3D NoC, classifying the works based
on several dimensions and giving some potential research directions
Physical parameter-aware Networks-on-Chip design
PhD ThesisNetworks-on-Chip (NoCs) have been proposed as a scalable, reliable
and power-efficient communication fabric for chip multiprocessors
(CMPs) and multiprocessor systems-on-chip (MPSoCs). NoCs determine
both the performance and the reliability of such systems, with a
significant power demand that is expected to increase due to developments
in both technology and architecture. In terms of architecture, an
important trend in many-core systems architecture is to increase the
number of cores on a chip while reducing their individual complexity.
This trend increases communication power relative to computation
power. Moreover, technology-wise, power-hungry wires are dominating
logic as power consumers as technology scales down. For these
reasons, the design of future very large scale integration (VLSI) systems
is moving from being computation-centric to communication-centric.
On the other hand, chip’s physical parameters integrity, especially
power and thermal integrity, is crucial for reliable VLSI systems. However,
guaranteeing this integrity is becoming increasingly difficult with
the higher scale of integration due to increased power density and operating
frequencies that result in continuously increasing temperature
and voltage drops in the chip. This is a challenge that may prevent
further shrinking of devices. Thus, tackling the challenge of power
and thermal integrity of future many-core systems at only one level
of abstraction, the chip and package design for example, is no longer
sufficient to ensure the integrity of physical parameters. New designtime
and run-time strategies may need to work together at different
levels of abstraction, such as package, application, network, to provide
the required physical parameter integrity for these large systems. This
necessitates strategies that work at the level of the on-chip network
with its rising power budget.
This thesis proposes models, techniques and architectures to improve
power and thermal integrity of Network-on-Chip (NoC)-based
many-core systems. The thesis is composed of two major parts: i)
minimization and modelling of power supply variations to improve
power integrity; and ii) dynamic thermal adaptation to improve thermal
integrity. This thesis makes four major contributions. The first is
a computational model of on-chip power supply variations in NoCs.
The proposed model embeds a power delivery model, an NoC activity
simulator and a power model. The model is verified with SPICE simulation
and employed to analyse power supply variations in synthetic
and real NoC workloads. Novel observations regarding power supply
noise correlation with different traffic patterns and routing algorithms
are found. The second is a new application mapping strategy aiming
vii
to minimize power supply noise in NoCs. This is achieved by defining
a new metric, switching activity density, and employing a force-based
objective function that results in minimizing switching density. Significant
reductions in power supply noise (PSN) are achieved with a low
energy penalty. This reduction in PSN also results in a better link timing
accuracy. The third contribution is a new dynamic thermal-adaptive
routing strategy to effectively diffuse heat from the NoC-based threedimensional
(3D) CMPs, using a dynamic programming (DP)-based distributed
control architecture. Moreover, a new approach for efficient extension
of two-dimensional (2D) partially-adaptive routing algorithms
to 3D is presented. This approach improves three-dimensional networkon-
chip (3D NoC) routing adaptivity while ensuring deadlock-freeness.
Finally, the proposed thermal-adaptive routing is implemented in
field-programmable gate array (FPGA), and implementation challenges,
for both thermal sensing and the dynamic control architecture are addressed.
The proposed routing implementation is evaluated in terms
of both functionality and performance.
The methodologies and architectures proposed in this thesis open a
new direction for improving the power and thermal integrity of future
NoC-based 2D and 3D many-core architectures
Exploration and Design of Power-Efficient Networked Many-Core Systems
Multiprocessing is a promising solution to meet the requirements of near future applications. To get full benefit from parallel processing, a manycore system needs efficient, on-chip communication architecture. Networkon- Chip (NoC) is a general purpose communication concept that offers highthroughput, reduced power consumption, and keeps complexity in check by a regular composition of basic building blocks. This thesis presents power efficient communication approaches for networked many-core systems. We address a range of issues being important for designing power-efficient manycore systems at two different levels: the network-level and the router-level.
From the network-level point of view, exploiting state-of-the-art concepts such as Globally Asynchronous Locally Synchronous (GALS), Voltage/ Frequency Island (VFI), and 3D Networks-on-Chip approaches may be a solution to the excessive power consumption demanded by today’s and future many-core systems. To this end, a low-cost 3D NoC architecture, based on high-speed GALS-based vertical channels, is proposed to mitigate high peak temperatures, power densities, and area footprints of vertical interconnects in 3D ICs. To further exploit the beneficial feature of a negligible inter-layer distance of 3D ICs, we propose a novel hybridization scheme for inter-layer communication. In addition, an efficient adaptive routing algorithm is presented which enables congestion-aware and reliable communication for the hybridized NoC architecture. An integrated monitoring and management platform on top of this architecture is also developed in order to implement more scalable power optimization techniques.
From the router-level perspective, four design styles for implementing power-efficient reconfigurable interfaces in VFI-based NoC systems are proposed. To enhance the utilization of virtual channel buffers and to manage their power consumption, a partial virtual channel sharing method for NoC routers is devised and implemented.
Extensive experiments with synthetic and real benchmarks show significant power savings and mitigated hotspots with similar performance compared to latest NoC architectures. The thesis concludes that careful codesigned elements from different network levels enable considerable power savings for many-core systems.Siirretty Doriast
Thermal-Aware Networked Many-Core Systems
Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors.
This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.Siirretty Doriast
A Survey of Prediction and Classification Techniques in Multicore Processor Systems
In multicore processor systems, being able to accurately predict the future provides new optimization opportunities, which otherwise could not be exploited. For example, an oracle able to predict a certain application\u27s behavior running on a smart phone could direct the power manager to switch to appropriate dynamic voltage and frequency scaling modes that would guarantee minimum levels of desired performance while saving energy consumption and thereby prolonging battery life. Using predictions enables systems to become proactive rather than continue to operate in a reactive manner. This prediction-based proactive approach has become increasingly popular in the design and optimization of integrated circuits and of multicore processor systems. Prediction transforms from simple forecasting to sophisticated machine learning based prediction and classification that learns from existing data, employs data mining, and predicts future behavior. This can be exploited by novel optimization techniques that can span across all layers of the computing stack. In this survey paper, we present a discussion of the most popular techniques on prediction and classification in the general context of computing systems with emphasis on multicore processors. The paper is far from comprehensive, but, it will help the reader interested in employing prediction in optimization of multicore processor systems
An Artificial Neural Networks based Temperature Prediction Framework for Network-on-Chip based Multicore Platform
Continuous improvement in silicon process technologies has made possible the integration of hundreds of cores on a single chip. However, power and heat have become dominant constraints in designing these massive multicore chips causing issues with reliability, timing variations and reduced lifetime of the chips. Dynamic Thermal Management (DTM) is a solution to avoid high temperatures on the die. Typical DTM schemes only address core level thermal issues. However, the Network-on-chip (NoC) paradigm, which has emerged as an enabling methodology for integrating hundreds to thousands of cores on the same die can contribute significantly to the thermal issues. Moreover, the typical DTM is triggered reactively based on temperature measurements from on-chip thermal sensor requiring long reaction times whereas predictive DTM method estimates future temperature in advance, eliminating the chance of temperature overshoot. Artificial Neural Networks (ANNs) have been used in various domains for modeling and prediction with high accuracy due to its ability to learn and adapt. This thesis concentrates on designing an ANN prediction engine to predict the thermal profile of the cores and Network-on-Chip elements of the chip. This thermal profile of the chip is then used by the predictive DTM that combines both core level and network level DTM techniques. On-chip wireless interconnect which is recently envisioned to enable energy-efficient data exchange between cores in a multicore environment, will be used to provide a broadcast-capable medium to efficiently distribute thermal control messages to trigger and manage the DTM schemes
3D Stacked Cache Data Management for Energy Minimization of 3D Chip Multiprocessor
In this model a runtime cache data mapping is discussed for 3-D stacked L2 caches to minimize the overall energy of 3-D chip multiprocessors (CMPs). The suggested method considers both temperature distribution and memory traffic of 3-D CMPs. Experimental result shows energy reduction achieving up to 22.88% compared to an existing solution which considers only the temperature distribution. New tendencies envisage 3D Multi-Processor System-On-Chip (MPSoC) design as a promising solution to keep increasing the performance of the next-generation high performance computing (HPC) systems. However, as the power density of HPC systems increases with the arrival of 3D MPSoCs with energy reduction achieving up to 19.55% by supplying electrical power to the computing equipment and constantly removing the generated heat is rapidly becoming the dominant cost in any HPC facility
Design Space Exploration and Resource Management of Multi/Many-Core Systems
The increasing demand of processing a higher number of applications and related data on computing platforms has resulted in reliance on multi-/many-core chips as they facilitate parallel processing. However, there is a desire for these platforms to be energy-efficient and reliable, and they need to perform secure computations for the interest of the whole community. This book provides perspectives on the aforementioned aspects from leading researchers in terms of state-of-the-art contributions and upcoming trends
- …