A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System

Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem. As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres. Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ). PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases. Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model

Airborne Directional Networking: Topology Control Protocol Design

This research identifies and evaluates the impact of several architectural design choices in relation to airborne networking in contested environments related to autonomous topology control. Using simulation, we evaluate topology reconfiguration effectiveness using classical performance metrics for different point-to-point communication architectures. Our attention is focused on the design choices which have the greatest impact on reliability, scalability, and performance. In this work, we discuss the impact of several practical considerations of airborne networking in contested environments related to autonomous topology control modeling. Using simulation, we derive multiple classical performance metrics to evaluate topology reconfiguration effectiveness for different point-to-point communication architecture attributes for the purpose of qualifying protocol design elements

Performance and policy dimensions in internet routing

The Internet Routing Project, referred to in this report as the 'Highball Project', has been investigating architectures suitable for networks spanning large geographic areas and capable of very high data rates. The Highball network architecture is based on a high speed crossbar switch and an adaptive, distributed, TDMA scheduling algorithm. The scheduling algorithm controls the instantaneous configuration and swell time of the switch, one of which is attached to each node. In order to send a single burst or a multi-burst packet, a reservation request is sent to all nodes. The scheduling algorithm then configures the switches immediately prior to the arrival of each burst, so it can be relayed immediately without requiring local storage. Reservations and housekeeping information are sent using a special broadcast-spanning-tree schedule. Progress to date in the Highball Project includes the design and testing of a suite of scheduling algorithms, construction of software reservation/scheduling simulators, and construction of a strawman hardware and software implementation. A prototype switch controller and timestamp generator have been completed and are in test. Detailed documentation on the algorithms, protocols and experiments conducted are given in various reports and papers published. Abstracts of this literature are included in the bibliography at the end of this report, which serves as an extended executive summary

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

Analysis of the impact of wireless mobile devices in critical industrial applications

The main objective of the thesis is to study the impact of mobile nodes in industrial applications with strict reliability and time constraints in both centralized and decentralized topologies. Considering the harsh wireless channel conditions of industrial environments, that goal implies a considerable challenge. In order not to compromise the performance of the system, a deterministic Real-Time (RT) communication protocol is needed, along with a mechanism to deal with changes in the topology due to the movements of the wireless devices. The existing wireless standard technologies do not satisfy the requirements demanded by the most critical industrial applications such as Distributed Control Systems (DCS) and, thus, wired communication cannot be directly replaced by wireless solutions. Nevertheless, the adoption of wireless communications can be seen as an extension to the existing wired networks to create hybrid networks with mobility requirements. The design of a proper communication solution depends mainly on the choice of the Medium Access Control (MAC) protocol, which is responsible for controlling access to the medium and thereby plays a vital role in decreasing latency and packet errors. Furthermore, the changes in the topology due to the movement of the wireless devices must be managed correctly in order not to affect the performance of the entire network. In this doctoral thesis, a hybrid centralized architecture designed for industrial applications with strict requirements in terms of robustness, determinism and RT is proposed and evaluated. For that, a wireless RT MAC scheme based on the IEEE 802.11 physical layer is proposed along with a Real-Time Ethernet (RTE) MAC scheme. This hybrid system ensures seamless communication between both media. With the aim of including mobile devices in the proposed architecture, a soft-handover algorithm is designed and evaluated. This algorithm guarantees an uninterrupted communication during the handover process without the need for a second radio interface and with a reduced growth in network overhead. Finally, the impact of mobile nodes in a decentralized wireless topology is analysed. For that, the Self-Organizing Time Division Multiple Access (STDMA) protocol is evaluated to analyse its viability as an alternative to carrying out a handover in industrial applications without centralized systems.El objetivo principal de la tesis es estudiar el impacto de los nodos móviles en las aplicaciones inalámbricas industriales con requisitos estrictos de tiempo y robustez tanto para topologías centralizadas como descentralizadas. Este objetivo supone un gran desafío dadas las adversas condiciones del canal inalámbrico en los entornos industriales. Para no comprometer el rendimiento del sistema, es necesario un protocolo de comunicación determinista y con garantías de tiempo real, junto con un mecanismo para hacer frente a los cambios en la topología debido al movimiento de los dispositivos inalámbricos. Las tecnologías estándar inalámbricas existentes no satisfacen los requisitos exigidos por las aplicaciones industriales más críticas, como los Sistemas de Control Distribuido (DCS - Distributed Control Systems) y, por lo tanto, las comunicaciones cableadas no pueden ser reemplazadas directamente por soluciones inalámbricas. Sin embargo, la adopción de las comunicaciones inalámbricas puede verse como una extensión de las redes cableadas existentes con el objetivo de crear redes híbridas con requisitos de movilidad. El diseño de una solución de comunicación adecuada depende principalmente de la elección del protocolo de control de acceso al medio (MAC - Medium Access Control), el cual, desempeña un papel vital en la disminución de la latencia y del número de paquetes erróneos. Además, los cambios en la topología debidos al movimiento de los dispositivos inalámbricos deben gestionarse correctamente para que el rendimiento de toda la red no se vea afectado. En esta tesis doctoral se propone y se evalúa una arquitectura híbrida centralizada diseñada para aplicaciones industriales con requisitos estrictos de robustez, determinismo y tiempo real. Para ello, se propone un esquema MAC inalámbrico con garantías de tiempo real basado en la capa física IEEE 802.11 junto con un esquema MAC basado en Ethernet en tiempo real (RTE - Real-Time Ethernet). Este esquema híbrido garantiza una comunicación continua entre ambos medios de comunicación. Con el objetivo de incluir dispositivos móviles en la arquitectura propuesta, se propone y evalúa un algoritmo de soft-handover. Este algoritmo garantiza una comunicación ininterrumpida durante el proceso de handover sin la necesidad de una segunda interfaz de radio y con un aumento reducido de la sobrecarga de la red. Finalmente, se analiza el impacto de los nodos móviles en una topología inalámbrica descentralizada. Para ello, se evalúa el protocolo del estado del arte Self-Organizing Time Division Multiple Access (STDMA) con el objetivo de analizar su viabilidad como alternativa para realizar un handover en las aplicaciones industriales sin sistemas centralizados.Tesi honen helburu nagusia, nodo mugikorrek fidagarritasun eta denboraren aldetik baldintza ugari eskatzen duten aplikazio industrial zentralizatu eta deszentralizatuetan duten eragina aztertzea da. Eremu industrialetako haririk gabeko kanaletan ematen diren komunikazioetarako baldintza bereziki aurkakoak direla medio, helburu honek erronka handia sortzen du. Sarearen errendimendua arriskuan ez jartzeko, determinista eta denbora errealeko komunikazio protokolo bat beharrezkoa da, haririk gabeko nodoen mugimenduaren ondorioz topologiaren aldaketei aurre egiteko mekanismo batekin batera. Haririk gabeko teknologia estandarrek ez dute aplikazio industrial kritikoenek dituzten baldintzak betetzen eta, beraz, kable bidezko komunikazioak ezin dira haririk gabeko sistemekin ordezkatu. Hala ere, haririk gabeko komunikazioen erabilpena jadanik existitzen diren kable bidezko komunikazioen hedadura bezala kontsidera daiteke, mobilitate baldintzak dituzten sare hibridoak sortuz. Komunikazio sistemaren diseinu egokia Medium Access Control (MAC) protokoloaren hautaketa zuzenean oinarritzen da gehien bat, sarbidea kontrolatzeaz arduratzen baita, honela ezinbesteko papera izanik latentzian eta pakete erroreen murrizketan. Horretaz aparte, bai sare zentralizatu eta deszentralizatuen kasuan, haririk gabeko nodoen mugimenduek sortutako tipologia aldaketak azkar eta zuzen kudeatu behar dira sare osoko errendimenduak kalterik ez jasateko. Doktore tesi honetan, fidagarritasun zorrotz, determinismo eta denbora-errealeko baldintzak dituzten industria aplikazioetarako arkitektura hibrido zentralizatu bat proposatu eta ebaluatu da. Horretarako, IEEE 802.11 maila fisikoan oinarritutako haririk gabeko MAC eskema bat proposatu da, Real-Time Ethernet-en (RTE) oinarritutako MAC eskema batekin batera. Eskema hibrido honek bi komunikabideen artean etengabeko komunikazioa bermatzen du. Proposatutako arkitekturan nodo mugikorrak kontuan hartu ahal izateko, soft-handover algoritmo bat proposatu eta ebaluatu da. Algoritmo honek etenik gabeko komunikazioa bermatzen du handover prozesuan zehar bigarren irrati interfaze baten beharrik gabe eta sareko gainkarga oso gutxi handituz. Azkenik, nodo mugikorrek duten eragina haririk gabeko topologia deszentralizatuetan aztertu da. Horretako, bibliografiako Self-Organizing Time Division Multiple Access (STDMA) protokoloa ebaluatu da industrial aplikazioetako sistema zentralizatuen handover mekanismoaren alternatiba gisa

Routing UAVs to Co-Optimize Mission Effectiveness and Network Performance with Dynamic Programming

In support of the Air Force Research Laboratory\u27s (AFRL) vision of the layered sensing operations center, command and control intelligence surveillance and reconnaissance (C2ISR) more focus must be placed on architectures that support information systems, rather than just the information systems themselves. By extending the role of UAVs beyond simply intelligence, surveillance, and reconnaissance (ISR) operations and into a dual-role with networking operations we can better utilize our information assets. To achieve the goal of dual-role UAVs, a concrete approach to planning must be taken. This research defines a mathematical model and a non-trivial deterministic algorithmic approach to determining UAV placement to support ad-hoc network capability, while maintaining the valuable service of surveillance activities

The improvements of power management for clustered type large scope wireless sensor networks2010

Fuente Aragón, PDL. (2010). The improvements of power management for clustered type large scope wireless sensor networks2010. http://hdl.handle.net/10251/10244.Archivo delegad