275 research outputs found
Recommended from our members
Developing Flexible, Networked Lighting Control Systems That Reliably Save Energy in California Buildings
An important strategy to meet California's ambitious energy efficiency goals is to use innovative wireless communications, embedded sensors, data analytics and controls to significantly reduce lighting energy use in commercial buildings. This project developed a suite of networked lighting solutions to further this goal. The technologies include a platform for low-cost sensing, distributed intelligence and communications, the “PermaMote,” which is a self-powered sensor and controller for lighting applications. The project team also developed a task ambient daylighting system that integrates sensors with data-driven daylighting control using an open communication interface, called the “Readings-At-Desk” (RAD) system. To address the problem of building occupants being confused about how to operate traditional lighting control systems, the research team created content that could be the basis for a user interface standard for lighting controls. Finally, to address the difficulty of ensuring that advanced lighting control systems actually deliver their promised energy savings, the project team developed a new method for evaluating and specifying lighting systems’ performance.
The research team validated these technologies in the laboratory, showing significant lighting energy savings, up to 73% for the PermaMote sensor system from occupancy control and daylight dimming features, compared to the same light source (LED replacement lamps) operated via simple on/off scheduling. The project team also developed a proposed standard lighting data model and user interface elements, which were contributed to the ANSI Lighting Systems Committee (C137) for standardization. Existing data models are incomplete and inconsistent, whereas the lighting-specific data model developed here is clear and comprehensive, to serve as a starting point for creating common, universally agreed upon semantic definitions of key lighting parameters, to promote interoperability. For the task on verifiable performance of lighting systems, the project team developed a more effective metric for capturing the actual energy impact of a lighting system over time — the energy usage intensity (kWh/ft2/year). Three commercial lighting systems were tested in FLEXLAB® using this new metric, and the tests show a wide range in the accuracy of the self-reported energy-use metric, from 0.5% to 28% error compared to direct measurement of lighting energy using dedicated submeters. Overall, the project team estimates that these advanced technologies can reduce California office lighting energy use by 20% (above and beyond normal advanced lighting controls mandated by Title 24), resulting in about 1,600 GWh/year in savings
Building energy metering and environmental monitoring - A state-of-the-art review and directions for future research
Buildings are responsible for 40% of global energy use and contribute towards 30% of the total CO2 emissions. The drive to reduce energy consumption and associated greenhouse gas emissions from buildings has acted as a catalyst in the increasing installation of meters and sensors for monitoring energy use and indoor environmental conditions in buildings. This paper reviews the state-of-the-art in building energy metering and environmental monitoring, including their social, economic, environmental and legislative drivers. The integration of meters and sensors with existing building energy management systems (BEMS) is critically appraised, especially with regard to communication technologies and protocols such as ModBus, M-Bus, Ethernet, Cellular, ZigBee, WiFi and BACnet. Findings suggest that energy metering is covered in existing policies and regulations in only a handful of countries. Most of the legislations and policies on energy metering in Europe are in response to the Energy Performance of Buildings Directive (EPBD), 2002/91/EC. However, recent developments in policy are pointing towards more stringent metering requirements in future, moving away from voluntary to mandatory compliance. With regards to metering equipment, significant developments have been made in the recent past on miniaturisation, accuracy, robustness, data storage, ability to connect using multiple communication protocols, and the integration with BEMS and the Cloud – resulting in a range of available solutions, selection of which can be challenging. Developments in communication technologies, in particular in low-power wireless such as ZigBee and Bluetooth LE (BLE), are enabling cost-effective machine to machine (M2M) and internet of things (IoT) implementation of sensor networks. Privacy and data protection, however, remain a concern for data aggregators and end-users. The standardization of network protocols and device functionalities remains an active area of research and development, especially due to the prevalence of many protocols in the BEMS industry. Available solutions often lack interoperability between hardware and software systems, resulting in vendor lock-in. The paper provides a comprehensive understanding of available technologies for energy metering and environmental monitoring; their drivers, advantages and limitations; factors affecting their selection and future directions of research and development – for use a reference, as well as for generating further interest in this expanding research area
A Novel Design of an Automatic Lighting Control System for a Wireless Sensor Network with Increased Sensor Lifetime and Reduced Sensor Numbers
Wireless sensor networks (WSN) are currently being applied to energy conservation applications such as light control. We propose a design for such a system called a Lighting Automatic Control System (LACS). The LACS system contains a centralized or distributed architecture determined by application requirements and space usage. The system optimizes the calculations and communications for lighting intensity, incorporates user illumination requirements according to their activities and performs adjustments based on external lighting effects in external sensor and external sensor-less architectures. Methods are proposed for reducing the number of sensors required and increasing the lifetime of those used, for considerably reduced energy consumption. Additionally we suggest methods for improving uniformity of illuminance distribution on a workplane’s surface, which improves user satisfaction. Finally simulation results are presented to verify the effectiveness of our design
Policy Design for Controlling Set-Point Temperature of ACs in Shared Spaces of Buildings
Air conditioning systems are responsible for the major percentage of energy
consumption in buildings. Shared spaces constitute considerable office space
area, in which most office employees perform their meetings and daily tasks,
and therefore the ACs in these areas have significant impact on the energy
usage of the entire office building. The cost of this energy consumption,
however, is not paid by the shared space users, and the AC's temperature
set-point is not determined based on the users' preferences. This latter factor
is compounded by the fact that different people may have different choices of
temperature set-points and sensitivities to change of temperature. Therefore,
it is a challenging task to design an office policy to decide on a particular
set-point based on such a diverse preference set. As a result, users are not
aware of the energy consumption in shared spaces, which may potentially
increase the energy wastage and related cost of office buildings. In this
context, this paper proposes an energy policy for an office shared space by
exploiting an established temperature control mechanism. In particular, we
choose meeting rooms in an office building as the test case and design a policy
according to which each user of the room can give a preference on the
temperature set-point and is paid for felt discomfort if the set-point is not
fixed according to the given preference. On the other hand, users who enjoy the
thermal comfort compensate the other users of the room. Thus, the policy
enables the users to be cognizant and responsible for the payment on the energy
consumption of the office space they are sharing, and at the same time ensures
that the users are satisfied either via thermal comfort or through incentives.
The policy is also shown to be beneficial for building management. Through
experiment based case studies, we show the effectiveness of the proposed
policy.Comment: Journal paper accepted in Energy & Buildings (Elsevier
Recommended from our members
High-Performance Integrated Window and Façade Solutions for California
The researchers developed a new generation of high-performance façade systems and supporting design and management tools to support industry in meeting California’s greenhouse gas reduction targets, reduce energy consumption, and enable an adaptable response to minimize real-time demands on the electricity grid. The project resulted in five outcomes: (1) The research team developed an R-5, 1-inch thick, triplepane, insulating glass unit with a novel low-conductance aluminum frame. This technology can help significantly reduce residential cooling and heating loads, particularly during the evening. (2) The team developed a prototype of a windowintegrated local ventilation and energy recovery device that provides clean, dry fresh air through the façade with minimal energy requirements. (3) A daylight-redirecting louver system was prototyped to redirect sunlight 15–40 feet from the window. Simulations estimated that lighting energy use could be reduced by 35–54 percent without glare. (4) A control system incorporating physics-based equations and a mathematical solver was prototyped and field tested to demonstrate feasibility. Simulations estimated that total electricity costs could be reduced by 9-28 percent on sunny summer days through adaptive control of operable shading and daylighting components and the thermostat compared to state-of-the-art automatic façade controls in commercial building perimeter zones. (5) Supporting models and tools needed by industry for technology R&D and market transformation activities were validated. Attaining California’s clean energy goals require making a fundamental shift from today’s ad-hoc assemblages of static components to turnkey, intelligent, responsive, integrated building façade systems. These systems offered significant reductions in energy use, peak demand, and operating cost in California
Simulating an Integrated Smart Lighting Control of Ahmadu Bello Stadium, Kaduna Nigeria, with a View of Optimizing Energy Consumption
The reductions of unnecessary energy used in buildings have continuously been a global concern. The amounts of energy consumed in lighting a stadium main bowl have posed great challenge on as to how this waste could be drastically reduced. Also, there is a dart of information or data in Nigeria as regards aspects of minimizing lighting energy consumption in a stadium using simulation. This study has employed the use of energy meter and light lux portable device to gather field data on lighting energy consumption as well as the illuminances levels around the stadium. The study also uses a state-of-art lighting simulation software known as DialuxEvo software in modelling the stadium main bowl lighting to optimize energy use. The study discovered that an average of about 400 litres of diesel is consumed on each match when the generator is fully loaded with an average of about 4339.2Kw consumed by the 240 numbers of 2000Kw lamps each within 3 ½ hours match play. The existing lamps provides an average illuminance of 1703lux with a uniformity ratio of U1 (Emin/Emav) as 0.56 while U2 (Emin/Emav) as 0.82 using a 100 watts lamp with a SON gear luminaire. The result therefore showed that the existing lighting design for the stadium main bowl was inadequate and inefficient with lots of opportunity for energy savings. Hence, the lighting fittings should be retrofitted. The revamped lighting fittings should be installed at optimum angle in other to properly illuminate the stadium. Therefore, a proper consideration of the provided guide by The Society for Light and Lighting in the Chartered Institute of Building Services Engineering should be parameter and adhered to
Recommended from our members
Understanding the indoor environment through mining sensory data - a case study
A wireless sensor network (WSN) is a group of sensors linked by wireless medium to perform distributed sensing tasks. WSNs have attracted a wide interest from academia and industry alike due to their diversity of applications, including home automation, smart environment, and emergency services, in various buildings. The primary goal of a WSN is to collect data sensed by sensors. These data are characteristic of being heavily noisy, exhibiting temporal and spatial correlation. In order to extract useful information from such data, as this paper will demonstrate, people need to utilise various techniques to analyse the data. Data mining is a process in which a wide spectrum of data analysis methods is used. It is applied in the paper to analyse data collected from WSNs monitoring an indoor environment in a building. A case study is given to demonstrate how data mining can be used to optimise the use of the office space in a building
- …