On Timing Model Extraction and Hierarchical Statistical Timing Analysis

In this paper, we investigate the challenges to apply Statistical Static Timing Analysis (SSTA) in hierarchical design flow, where modules supplied by IP vendors are used to hide design details for IP protection and to reduce the complexity of design and verification. For the three basic circuit types, combinational, flip-flop-based and latch-controlled, we propose methods to extract timing models which contain interfacing as well as compressed internal constraints. Using these compact timing models the runtime of full-chip timing analysis can be reduced, while circuit details from IP vendors are not exposed. We also propose a method to reconstruct the correlation between modules during full-chip timing analysis. This correlation can not be incorporated into timing models because it depends on the layout of the corresponding modules in the chip. In addition, we investigate how to apply the extracted timing models with the reconstructed correlation to evaluate the performance of the complete design. Experiments demonstrate that using the extracted timing models and reconstructed correlation full-chip timing analysis can be several times faster than applying the flattened circuit directly, while the accuracy of statistical timing analysis is still well maintained

Implementation of Extracted Timing Methodology on Process Monitor for Silicon Characterization

Process variations are playing a key role in defining the behaviour of an IP. These process variations can accurately measure using process monitor. In order to verify process variations, the process monitor should meet all timing requirements. Static Timing Analysis (STA) uses best case/ and worst analysis overly pessimistic, and could be optimistic also in some cases. Static Timing Analysis (STA) is a method for estimating yield of a circuit in terms of timing activities. Model extraction is a technique that accurately captures the characteristics of interface logic of a design in the form of a timing library model and provides a capacity improvement in timing verification by more than two orders of magnitude. Extracted timing model is an efficient timing library model to get accurate timing arcs of the circuit. This paper describes Methodology for creating timing models and also the flow to develop IP (process monitor) ETMs (.lib) using Synopsys Primetime tool, which can be used in any SOC and ETMs (Extracted timing models)with necessary time-budgeting instead of IP Netlists. Generated ETM with and without annotation delays and compared the library file. And the process monitor2019;s ring oscillator is designed through Verilog code using cadence tool

HIGH PERFORMANCE CLOCK DISTRIBUTION FOR HIGH-SPEED VLSI SYSTEMS

Tohoku University堀口 進課

FinFET Cell Library Design and Characterization

abstract: Modern-day integrated circuits are very capable, often containing more than a billion transistors. For example, the Intel Ivy Bridge 4C chip has about 1.2 billion transistors on a 160 mm2 die. Designing such complex circuits requires automation. Therefore, these designs are made with the help of computer aided design (CAD) tools. A major part of this custom design flow for application specific integrated circuits (ASIC) is the design of standard cell libraries. Standard cell libraries are a collection of primitives from which the automatic place and route (APR) tools can choose a collection of cells and implement the design that is being put together. To operate efficiently, the CAD tools require multiple views of each cell in the standard cell library. This data is obtained by characterizing the standard cell libraries and compiling the results in formats that the tools can easily understand and utilize. My thesis focusses on the design and characterization of one such standard cell library in the ASAP7 7 nm predictive design kit (PDK). The complete design flow, starting from the choice of the cell architecture, design of the cell layouts and the various decisions made in that process to obtain optimum results, to the characterization of those cells using the Liberate tool provided by Cadence design systems Inc., is discussed in this thesis. The end results of the characterized library are used in the APR of a few open source register-transfer logic (RTL) projects and the efficiency of the library is demonstrated.Dissertation/ThesisMasters Thesis Computer Engineering 201

Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Architectural level delay and leakage power modelling of manufacturing process variation

PhD ThesisThe effect of manufacturing process variations has become a major issue regarding the estimation of circuit delay and power dissipation, and will gain more importance in the future as device scaling continues in order to satisfy market place demands for circuits with greater performance and functionality per unit area. Statistical modelling and analysis approaches have been widely used to reflect the effects of a variety of variational process parameters on system performance factor which will be described as probability density functions (PDFs). At present most of the investigations into statistical models has been limited to small circuits such as a logic gate. However, the massive size of present day electronic systems precludes the use of design techniques which consider a system to comprise these basic gates, as this level of design is very inefficient and error prone. This thesis proposes a methodology to bring the effects of process variation from transistor level up to architectural level in terms of circuit delay and leakage power dissipation. Using a first order canonical model and statistical analysis approach, a statistical cell library has been built which comprises not only the basic gate cell models, but also more complex functional blocks such as registers, FIFOs, counters, ALUs etc. Furthermore, other sensitive factors to the overall system performance, such as input signal slope, output load capacitance, different signal switching cases and transition types are also taken into account for each cell in the library, which makes it adaptive to an incremental circuit design. The proposed methodology enables an efficient analysis of process variation effects on system performance with significantly reduced computation time compared to the Monte Carlo simulation approach. As a demonstration vehicle for this technique, the delay and leakage power distributions of a 2-stage asynchronous micropipeline circuit has been simulated using this cell library. The experimental results show that the proposed method can predict the delay and leakage power distribution with less than 5% error and at least 50,000 times faster computation time compare to 5000-sample SPICE based Monte Carlo simulation. The methodology presented here for modelling process variability plays a significant role in Design for Manufacturability (DFM) by quantifying the direct impact of process variations on system performance. The advantages of being able to undertake this analysis at a high level of abstraction and thus early in the design cycle are two fold. First, if the predicted effects of process variation render the circuit performance to be outwith specification, design modifications can be readily incorporated to rectify the situation. Second, knowing what the acceptable limits of process variation are to maintain design performance within its specification, informed choices can be made regarding the implementation technology and manufacturer selected to fabricate the design