Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

An FPGA Architecture and CAD Flow Supporting Dynamically Controlled Power Gating

© 2015 IEEE.Leakage power is an important component of the total power consumption in field-programmable gate arrays (FPGAs) built using 90-nm and smaller technology nodes. Power gating was shown to be effective at reducing the leakage power. Previous techniques focus on turning OFF unused FPGA resources at configuration time; the benefit of this approach depends on resource utilization. In this paper, we present an FPGA architecture that enables dynamically controlled power gating, in which FPGA resources can be selectively powered down at run-time. This could lead to significant overall energy savings for applications having modules with long idle times. We also present a CAD flow that can be used to map applications to the proposed architecture. We study the area and power tradeoffs by varying the different FPGA architecture parameters and power gating granularity. The proposed CAD flow is used to map a set of benchmark circuits that have multiple power-gated modules to the proposed architecture. Power savings of up to 83% are achievable for these circuits. Finally, we study a control system of a robot that is used in endoscopy. Using the proposed architecture combined with clock gating results in up to 19% energy savings in this application

Vector processing-aware advanced clock-gating techniques for low-power fused multiply-add

The need for power efficiency is driving a rethink of design decisions in processor architectures. While vector processors succeeded in the high-performance market in the past, they need a retailoring for the mobile market that they are entering now. Floating-point (FP) fused multiply-add (FMA), being a functional unit with high power consumption, deserves special attention. Although clock gating is a well-known method to reduce switching power in synchronous designs, there are unexplored opportunities for its application to vector processors, especially when considering active operating mode. In this research, we comprehensively identify, propose, and evaluate the most suitable clock-gating techniques for vector FMA units (VFUs). These techniques ensure power savings without jeopardizing the timing. We evaluate the proposed techniques using both synthetic and “real-world” application-based benchmarking. Using vector masking and vector multilane-aware clock gating, we report power reductions of up to 52%, assuming active VFU operating at the peak performance. Among other findings, we observe that vector instruction-based clock-gating techniques achieve power savings for all vector FP instructions. Finally, when evaluating all techniques together, using “real-world” benchmarking, the power reductions are up to 80%. Additionally, in accordance with processor design trends, we perform this research in a fully parameterizable and automated fashion.The research leading to these results has received funding from the RoMoL ERC Advanced Grant GA 321253 and is supported in part by the European Union (FEDER funds) under contract TTIN2015-65316-P. The work of I. Ratkovic was supported by a FPU research grant from the Spanish MECD.Peer ReviewedPostprint (author's final draft

RTL2RTL Formal Equivalence: Boosting the Design Confidence

Increasing design complexity driven by feature and performance requirements and the Time to Market (TTM) constraints force a faster design and validation closure. This in turn enforces novel ways of identifying and debugging behavioral inconsistencies early in the design cycle. Addition of incremental features and timing fixes may alter the legacy design behavior and would inadvertently result in undesirable bugs. The most common method of verifying the correctness of the changed design is to run a dynamic regression test suite before and after the intended changes and compare the results, a method which is not exhaustive. Modern Formal Verification (FV) techniques involving new methods of proving Sequential Hardware Equivalence enabled a new set of solutions for the given problem, with complete coverage guarantee. Formal Equivalence can be applied for proving functional integrity after design changes resulting from a wide variety of reasons, ranging from simple pipeline optimizations to complex logic redistributions. We present here our experience of successfully applying the RTL to RTL (RTL2RTL) Formal Verification across a wide spectrum of problems on a Graphics design. The RTL2RTL FV enabled checking the design sanity in a very short time, thus enabling faster and safer design churn. The techniques presented in this paper are applicable to any complex hardware design.Comment: In Proceedings FSFMA 2014, arXiv:1407.195

Course grained low power design flow using UPF

Increased system complexity has led to the substitution of the traditional bottom-up design flow by systematic hierarchical design flow. The main motivation behind the evolution of such an approach is the increasing difficulty in hardware realization of complex systems. With decreasing channel lengths, few key problems such as timing closure, design sign-off, routing complexity, signal integrity, and power dissipation arise in the design flows. Specifically, minimizing power dissipation is critical in several high-end processors. In high-end processors, the design complexity contributes to the overall dynamic power while the decreasing transistor size results in static power dissipation. This research aims at optimizing the design flow for power and timing using the unified power format (UPF). UPF provides a strategic format to specify power-aware design information at every stage in the flow. The low power reduction techniques enforced in this research are multi-voltage, multi-threshold voltage (Vth), and power gating with state retention. An inherent design challenge addressed in this research is the choice of power optimization techniques as the flow advances from synthesis to physical design. A top-down digital design flow for a 32 bit MIPS RISC processor has been implemented with and without UPF synthesis flow for 65nm technology. The UPF synthesis is implemented with two voltages, 1.08V and 0.864V (Multi-VDD). Area, power and timing metrics are analyzed for the flows developed. Power savings of about 20 % are achieved in the design flow with \u27multi-threshold\u27 power technique compared to that of the design flow with no low power techniques employed. Similarly, 30 % power savings are achieved in the design flow with the UPF implemented when compared to that of the design flow with \u27multi-threshold\u27 power technique employed. Thus, a cumulative power savings of 42% has been achieved in a complete power efficient design flow (UPF) compared to that of the generic top-down standard flow with no power saving techniques employed. This is substantiated by the low voltage operation of modules in the design, reduction in clock switching power by gating clocks in the design and extensive use of HVT and LVT standard cells for implementation. The UPF synthesis flow saw the worst timing slack and more area when compared to those of the `multi-threshold\u27 or the generic flow. Percentage increase in the area with UPF is approximately 15%; a significant source for this increase being the additional power controlling logic added

클럭 게이팅 및 플립 플롭 동시 최적화를 위한 설계 및 알고리즘

학위논문 (석사)-- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2019. 2. 김태환.본 논문에서는 표준 셀에서부터 배치 단계에 이르는 다양한 설계단에에서 칩의 동적 전력을 최적화 기법을 소개한다. 이 연구는 우선 데이터 구동형 (즉, 토글링 기반) 클럭 게이팅이 종래 클럭 게이팅 기법들에서 결코 다루어지지 않았던 플립 플 롭의 합성과 밀접하게 통합될 수 있는 방법을 연구한다. 우리의 관측의 핵심은 플립 플롭 셀의 일부 내부 부품이 클럭 게이팅 인에이블 신호를 생성 하기 위해 재사용 될 수 있다는 것이다. 이를 바탕으로 eXOR-FF 라고 불리는 새롭게 최적화된 플립 플롭 배선 구조를 제안합니다. 이 구조에서는 매 클럭 주기마다 내부 로직을 재사용 하여 클럭 게이팅을 통해 플립 플롭을 활성화할지 또는 비활성화할지 결정합니다. 모든 쌍의 플립 플롭 및 토글릴 감지 로직에서의 영역을 절약함에 따라서 누설 및 동적 전력의 절전 효과를 달성합니다. 그런 다음, 두 가지고유한 장점을 제공하는 배치/타이밍 인식 클럭 게이팅 탐색에 대한 포괄적인 방법론을 제안합니다. 해당 방 법론은 eXOR-FF 의 이점을 극대화하고, 전력 소비 및 타이밍 영향의 분해에 대한 정밀 분석을 수행하고 틀럭 게이팅 참색의 핵심 엔진을 비용기능으로 변환하는데 가장 적합합니다. ISCAS89, ITC89, ITC99 및 IWLS 2005의 벤치 마크 회로를 사용 한 실험을 통해 제안 된 방법이 이전의 데이터 구동 클록 게이팅 방식과 비교하여 총 전력을 5.6 % 및 면적으로 5.3 % 줄일 수 있음을 보여 주었다.In this paper, we introduce dynamic power optimization techniques applicable for various design stage from standard cell to placement stage. This work firstly investi�gates the problem of how designing data-driven (i.e., toggling based) clock gating can be closely integrated with the synthesis of flip-flops, which has never been addressed in the prior clock gating works. Our key observation is that some internal part of a flip-flop cell can be reused to generate its clock gating enable signal. Based on this, we propose a newly optimized flip-flop wiring structure, called eXOR-FF, in which an internal logic can be reused for every clock cycle to decide if the flip-flop is to be activated or inactivated through clock gating, thereby achieving area saving (thus, leakage as well as dynamic power saving) on every pair of flip-flop and its toggling detection logic. Then, we propose a comprehensive methodology of placement/timing�aware clock gating exploration that provides two unique strengths: best suited for max�imally exploiting the benefit of eXOR-FFs and precise analyses on the decomposition of power consumptions and timing impact, and translating them into cost functions in core engine of clock gating exploration. Through experiments with benchmark circuits in ISCAS89, ITC89, ITC99 and IWLS 2005, it is shown that our proposed method is able to reduce the total power by 5.6% and total cell area by 5.3% compared with the previous data-driven clock gating method in [1].Abstract Contents List of Tables List of Figures 1 Introduction 1.1 Power Consumption in CMOS Digital Design 1.2 Low Power Design Methodologies 1.3 Contribution of This Thesis 2 Preliminary and Motivations 6 2.1 Background 2.2 Observation on Area and Power Saving 2.3 Observation on Timing Impact 3 Redesign of Flip-flops Specialized for Clock Gating 3.1 Observation on Area Impact 4 Placement-aware Clock Gating Methodology Utilizing eXOR-FF Cells 4.1 Overall Design Flow 4.2 Cost Formulation for Conventional Clock Gating 4.3 Cost Formulation for Our Clock Gating using eXOR-FFs 5 Experiments 5.1 Experimental Setup 5.2 Experimental Results 5.3 Comparing with Industry Algorithm 6 Conclusion Abstract (In Korean)Maste

On-Chip Transparent Wire Pipelining (invited paper)

Wire pipelining has been proposed as a viable mean to break the discrepancy between decreasing gate delays and increasing wire delays in deep-submicron technologies. Far from being a straightforwardly applicable technique, this methodology requires a number of design modifications in order to insert it seamlessly in the current design flow. In this paper we briefly survey the methods presented by other researchers in the field and then we thoroughly analyze the solutions we recently proposed, ranging from system-level wire pipelining to physical design aspects