Sum Throughput Maximization in Multi-Tag Backscattering to Multiantenna Reader

Backscatter communication (BSC) is being realized as the core technology for pervasive sustainable Internet-of-Things applications. However, owing to the resource-limitations of passive tags, the efficient usage of multiple antennas at the reader is essential for both downlink excitation and uplink detection. This work targets at maximizing the achievable sum-backscattered-throughput by jointly optimizing the transceiver (TRX) design at the reader and backscattering coefficients (BC) at the tags. Since, this joint problem is nonconvex, we first present individually-optimal designs for the TRX and BC. We show that with precoder and {combiner} designs at the reader respectively targeting downlink energy beamforming and uplink Wiener filtering operations, the BC optimization at tags can be reduced to a binary power control problem. Next, the asymptotically-optimal joint-TRX-BC designs are proposed for both low and high signal-to-noise-ratio regimes. Based on these developments, an iterative low-complexity algorithm is proposed to yield an efficient jointly-suboptimal design. Thereafter, we discuss the practical utility of the proposed designs to other application settings like wireless powered communication networks and BSC with imperfect channel state information. Lastly, selected numerical results, validating the analysis and shedding novel insights, demonstrate that the proposed designs can yield significant enhancement in the sum-backscattered throughput over existing benchmarks.Comment: 17 pages, 5 figures, accepted for publication in IEEE Transactions on Communication

Towards 6G-Enabled Internet of Things with IRS-Empowered Backscatter-Assisted WPCNs

Wireless powered communication networks (WPCNs) are expected to play a key role in the forthcoming 6G systems. However, they have not yet found their way to large-scale practical implementations due to their inherent shortcomings such as the low efficiency of energy transfer and information transmission. In this thesis, we aim to study the integration of WPCNs with other novel technologies of backscatter communication and intelligent reflecting surface (IRS) to enhance the performance and improve the efficiency of these networks so as to prepare them for being seamlessly fitted into the 6G ecosystem. We first study the incorporation of backscatter communication into conventional WPCNs and investigate the performance of backscatter-assisted WPCNs (BS-WPCNs). We then study the inclusion of IRS into the WPCN environment, where an IRS is used for improving the performance of energy transfer and information transmission in WPCNs. After that, the simultaneous integration of backscatter communication and IRS technologies into WPCNs is investigated, where the analyses show the significant performance gains that can be achieved by this integration

Data Collection in Two-Tier IoT Networks with Radio Frequency (RF) Energy Harvesting Devices and Tags

The Internet of things (IoT) is expected to connect physical objects and end-users using technologies such as wireless sensor networks and radio frequency identification (RFID). In addition, it will employ a wireless multi-hop backhaul to transfer data collected by a myriad of devices to users or applications such as digital twins operating in a Metaverse. A critical issue is that the number of packets collected and transferred to the Internet is bounded by limited network resources such as bandwidth and energy. In this respect, IoT networks have adopted technologies such as time division multiple access (TDMA), signal interference cancellation (SIC) and multiple-input multiple-output (MIMO) in order to increase network capacity. Another fundamental issue is energy. To this end, researchers have exploited radio frequency (RF) energy-harvesting technologies to prolong the lifetime of energy constrained sensors and smart devices. Specifically, devices with RF energy harvesting capabilities can rely on ambient RF sources such as access points, television towers, and base stations. Further, an operator may deploy dedicated power beacons that serve as RF-energy sources. Apart from that, in order to reduce energy consumption, devices can adopt ambient backscattering communication technologies. Advantageously, backscattering allows devices to communicate using negligible amount of energy by modulating ambient RF signals. To address the aforementioned issues, this thesis first considers data collection in a two-tier MIMO ambient RF energy-harvesting network. The first tier consists of routers with MIMO capability and a set of source-destination pairs/flows. The second tier consists of energy harvesting devices that rely on RF transmissions from routers for energy supply. The problem is to determine a minimum-length TDMA link schedule that satisfies the traffic demand of source-destination pairs and energy demand of energy harvesting devices. It formulates the problem as a linear program (LP), and outlines a heuristic to construct transmission sets that are then used by the said LP. In addition, it outlines a new routing metric that considers the energy demand of energy harvesting devices to cope with routing requirements of IoT networks. The simulation results show that the proposed algorithm on average achieves 31.25% shorter schedules as compared to competing schemes. In addition, the said routing metric results in link schedules that are at most 24.75% longer than those computed by the LP

Minimum Throughput Maximization for Multi-UAV Enabled WPCN: A Deep Reinforcement Learning Method

This paper investigates joint unmanned aerial vehicle (UAV) trajectory planning and time resource allocation for minimum throughput maximization in a multiple UAV-enabled wireless powered communication network (WPCN). In particular, the UAVs perform as base stations (BS) to broadcast energy signals in the downlink to charge IoT devices, while the IoT devices send their independent information in the uplink by utilizing the collected energy. The formulated throughput optimization problem which involves joint optimization of 3D path design and channel resource assignment with the constraint of flight speed of UAVs and uplink transmit power of IoT devices, is not convex and thus is extremely difficult to solve directly. We take advantage of the multi-agent deep Q learning (DQL) strategy and propose a novel algorithm to tackle this problem. Simulation results indicate that the proposed DQL-based algorithm significantly improve performance gain in terms of minimum throughput maximization compared with the conventional WPCN scheme