Towards low-cost gigabit wireless systems at 60 GHz

The world-wide availability of the huge amount of license-free spectral space in the 60 GHz band provides wide room for gigabit-per-second (Gb/s) wireless applications. A commercial (read: low-cost) 60-GHz transceiver will, however, provide limited system performance due to the stringent link budget and the substantial RF imperfections. The work presented in this thesis is intended to support the design of low-cost 60-GHz transceivers for Gb/s transmission over short distances (a few meters). Typical applications are the transfer of high-definition streaming video and high-speed download. The presented work comprises research into the characteristics of typical 60-GHz channels, the evaluation of the transmission quality as well as the development of suitable baseband algorithms. This can be summarized as follows. In the first part, the characteristics of the wave propagation at 60 GHz are charted out by means of channel measurements and ray-tracing simulations for both narrow-beam and omni-directional configurations. Both line-of-sight (LOS) and non-line-of-sight (NLOS) are considered. This study reveals that antennas that produce a narrow beam can be used to boost the received power by tens of dBs when compared with omnidirectional configurations. Meanwhile, the time-domain dispersion of the channel is reduced to the order of nanoseconds, which facilitates Gb/s data transmission over 60-GHz channels considerably. Besides the execution of measurements and simulations, the influence of antenna radiation patterns is analyzed theoretically. It is indicated to what extent the signal-to-noise ratio, Rician-K factor and channel dispersion are improved by application of narrow-beam antennas and to what extent these parameters will be influenced by beam pointing errors. From both experimental and analytical work it can be concluded that the problem of the stringent link-budget can be solved effectively by application of beam-steering techniques. The second part treats wideband transmission methods and relevant baseband algorithms. The considered schemes include orthogonal frequency division multiplexing (OFDM), multi-carrier code division multiple access (MC-CDMA) and single carrier with frequency-domain equalization (SC-FDE), which are promising candidates for Gb/s wireless transmission. In particular, the optimal linear equalization in the frei quency domain and associated implementation issues such as synchronization and channel estimation are examined. Bit error rate (BER) expressions are derived to evaluate the transmission performance. Besides the linear equalization techniques, a low-complexity inter-symbol interference cancellation technique is proposed to achieve much better performance of code-spreading systems such as MC-CDMA and SC-FDE. Both theoretical analysis and simulations demonstrate that the proposed scheme offers great advantages as regards both complexity and performance. This makes it particularly suitable for 60-GHz applications in multipath environments. The third part treats the influence of quantization and RF imperfections on the considered transmission methods in the context of 60-GHz radios. First, expressions for the BER are derived and the influence of nonlinear distortions caused by the digital-to-analog converters, analog-to-digital converters and power amplifiers on the BER performance is examined. Next, the BER performance under the influence of phase noise and IQ imbalance is evaluated for the case that digital compensation techniques are applied in the receiver as well as for the case that such techniques are not applied. Finally, a baseline design of a low-cost Gb/s 60-GHz transceiver is presented. It is shown that, by application of beam-steering in combination with SC-FDE without advanced channel coding, a data rate in the order of 2 Gb/s can be achieved over a distance of 10 meters in a typical NLOS indoor scenario

Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems

Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER

Multi-rate access schemes and successive interference cancellation for wireless multimedia MC-CDMA communications

To catch up with the fast changes of the information challenges, providing multimedia services has become a very important requirement for future wireless communications. A proper system, capable of supporting multi-rate transmissions as well as handling high quality of service (QoS) requirements in hostile wireless communication environments, should be sought. Multi-carrier CDMA (MC-CDMA), a combination of multi-carrier modulation (MCM) and direct-sequence CDMA (DS-CDMA), appears to be one of the most elegant solutions. In this dissertation, four multi-rate access schemes, termed uncoded fixed spreading length (UFSL), coded fixed spreading length (CFSL), multi-code fixed spreading length (MFSL) and variable spreading length (VSL), are constructed for MC-CDMA. Due to different sub-carrier assignment strategies, they present different properties in spectral utilization efficiency (SUE), rate matching capability, receiver structure and bit-error-rate (BER) performance in correlated Rayleigh fading channels. With these schemes, different information traffic such as voice, video and higher rate data can be transmitted seanilessly through one MC-CDMA infrastructure. The performance of the multi-rate MC-CDMA is mainly limited by multiple access interference (MAI). For example, in the MFSL MC-CDMA systems, the interference is not only presented among different users, but also among different symbols of the same user transmitted in parallel on different spreading codes. To mitigate this problem, a nonlinear zero-forcing successive interference cancellation (ZF-SIC) receiver and a minimum mean square error SIC (MMSE-SIC) receiver are applied in the MFSL MC-CDMA systems. It is well known that SIC is sensitive to the receive power distribution. By providing channel state information (CSI) at the receiver and reliable feedback of power distribution from the receiver to the transmitter, SIC can be integrated with power distribution control (PDC), which improves the system capacity significantly. In this dissertation, the PDC algorithms, under both a short-term power constraint (STPC) and a long-term power constraint (LTPC) are investigated for two different SIC receivers. For the ZF-SIC receiver, the PDC under the equal BER criterion, which ensures the same performance after SIC for all parallel transmit symbols, is first considered. It is found that for a multi-code system, such equal BER PDC is only suboptimal from the viewpoint of minimizing each user\u27s BER, hence, an optimal PDC algorithm is proposed, which significantly outperforms the equal BER PDC, particularly under the STPC and highly-loaded systems. For the MMSE-SIC, the PDC under the equal BER criterion is derived, which cancels interference very effectively, resulting in a performance of a fully-loaded system close to the single user bound (SUB). In comparison to the nonlinear matched-filter SIC (MF-SIC) with the equal BER PDC, studied extensively in the literature, the ZF-SIC and MMSE-SIC with the proposed PDC algorithms present remarkable performance advantage. Finally, the effect of channel estimation errors (CEE) on the performance of the MMSE-SIC with the equal BER PDC is analyzed. A method of second-order approximation is used to estimate the mean excess MSE (MEMSE) of the parallel transmit symbols, under a given decision order. The approximation accuracy is confirmed by simulation results. Furthermore, it is also interesting to find out that the MMSE-SIC with the equal BER PDC presents significant robustness to CEE

Genetic Algorithm Assisted Optimum Detection For Block Data Transmission Systems

Recent years have witnessed an increase in demand for higher transmission data rates for wireless multimedia communications applications. Wireless data transmission systems with high data rates always face problems over time dispersive channels. New technologies that employ block data transmission where the data is converted into blocks separated by known symbols have been introduced to combat the impairments due to dispersive channels. This arrangement confines the Inter Symbol Interference (ISI) to a particular block and allows Block-by-Block data processing. Block Data Transmission Systems (BDTS) is one of the promising techniques for high data rate data transmission and found in the fourth generation wireless technologies such as Orthogonal Frequency Division Multiplexing (OFDM), Single Carrier Frequency Division Multiple Access (SC-FDMA) and Discrete Multi Tone (DMT) Modulation schemes etc

Wavelet-based multi-carrier code division multiple access systems

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Low-Complexity Algorithms for Channel Estimation in Optimised Pilot-Assisted Wireless OFDM Systems

Orthogonal frequency division multiplexing (OFDM) has recently become a dominant transmission technology considered for the next generation fixed and mobile broadband wireless communication systems. OFDM has an advantage of lessening the severe effects of the frequency-selective (multipath) fading due to the band splitting into relatively flat fading subchannels, and allows for low-complexity transceiver implementation based on the fast Fourier transform algorithms. Combining OFDM modulation with multilevel frequency-domain symbol mapping (e.g., QAM) and spatial multiplexing (SM) over the multiple-input multiple-output (MIMO) channels, can theoretically achieve near Shannon capacity of the communication link. However, the high-rate and spectrumefficient system implementation requires coherent detection at the receiving end that is possible only when accurate channel state information (CSI) is available. Since in practice, the response of the wireless channel is unknown and is subject to random variation with time, the receiver typically employs a channel estimator for CSI acquisition. The channel response information retrieved by the estimator is then used by the data detector and can also be fed back to the transmitter by means of in-band or out-of-band signalling, so the latter could adapt power loading, modulation and coding parameters according to the channel conditions. Thus, design of an accurate and robust channel estimator is a crucial requirement for reliable communication through the channel, which is selective in time and frequency. In a MIMO configuration, a separate channel estimator has to be associated with each transmit/receive antenna pair, making the estimation algorithm complexity a primary concern. Pilot-assisted methods, relying on the insertion of reference symbols in certain frequencies and time slots, have been found attractive for identification of the doubly-selective radio channels from both the complexity and performance standpoint. In this dissertation, a family of the reduced-complexity estimators for the single and multiple-antenna OFDM systems is developed. The estimators are based on the transform-domain processing and have the same order of computational complexity, irrespective of the number of pilot subcarriers and their positioning. The common estimator structure represents a cascade of successive small-dimension filtering modules. The number of modules, as well as their order inside the cascade, is determined by the class of the estimator (one or two-dimensional) and availability of the channel statistics (correlation and signal-to-noise power ratio). For fine precision estimation in the multipath channels with statistics not known a priori, we propose recursive design of the filtering modules. Simulation results show that in the steady state, performance of the recursive estimators approaches that of their theoretical counterparts, which are optimal in the minimum mean square error (MMSE) sense. In contrast to the majority of the channel estimators developed so far, our modular-type architectures are suitable for the reconfigurable OFDM transceivers where the actual channel conditions influence the decision of what class of filtering algorithm to use, and how to allot pilot subcarrier positions in the band. In the pilot-assisted transmissions, channel estimation and detection are performed separately from each other over the distinct subcarrier sets. The estimator output is used only to construct the detector transform, but not as the detector input. Since performance of both channel estimation and detection depends on the signal-to-noise power vi ratio (SNR) at the corresponding subcarriers, there is a dilemma of the optimal power allocation between the data and the pilot symbols as these are conflicting requirements under the total transmit power constraint. The problem is exacerbated by the variety of channel estimators. Each kind of estimation algorithm is characterised by its own SNR gain, which in general can vary depending on the channel correlation. In this dissertation, we optimise pilot-data power allocation for the case of developed low-complexity one and two-dimensional MMSE channel estimators. The resultant contribution is manifested by the closed-form analytical expressions of the upper bound (suboptimal approximate value) on the optimal pilot-to-data power ratio (PDR) as a function of a number of design parameters (number of subcarriers, number of pilots, number of transmit antennas, effective order of the channel model, maximum Doppler shift, SNR, etc.). The resultant PDR equations can be applied to the MIMO-OFDM systems with arbitrary arrangement of the pilot subcarriers, operating in an arbitrary multipath fading channel. These properties and relatively simple functional representation of the derived analytical PDR expressions are designated to alleviate the challenging task of on-the-fly optimisation of the adaptive SM-MIMO-OFDM system, which is capable of adjusting transmit signal configuration (e.g., block length, number of pilot subcarriers or antennas) according to the established channel conditions

High performance faster-than-nyquist signaling

AbstractIn a wireless broadband context, multi-path dispersive channels can severely affectdata communication of Mobile Terminals (MTs) uplink.Single Carrier withFrequency-Domain Equalization (SC-FDE) has been proposed to deal with highlydispersive channels for the uplink of broadband wireless systems. However, currentsystems rely on older assumptions of the Nyquist theorem and assume that a systemneeds a minimum bandwidth 2Wper MT. Faster-Than-Nyquist (FTN) assumesthat it is possible to employ a bandwidth as low as 0.802 of the original Nyquistbandwidth with minimum loss - despite this, the current literature has only proposedcomplex receivers for a simple characterization of the wireless channel. Furthermore,the uplink of SC-FDE can be severely affected by a deep-fade and or poor channelconditions; to cope with such difficulties Diversity Combining (DC) Hybrid ARQ(H-ARQ) is a viable technique, since it combines the several packet copies sent bya MT to create reliable packet symbols at the receiver.In this thesis we consider the use of FTN signaling for the uplink of broadbandwireless systems employing SC-FDE based on the Iterative Block with DecisionFeedback Equalization (IB-DFE) receiver with a simple scheduled access HybridAutomatic Repeat reQuest (H-ARQ) specially designed taking into account thecharacteristics of FTN signals. This approach achieves a better performance thanNyquist signaling by taking advantage of the additional bandwidth employed of aroot-raised cosine pulse for additional diversity.Alongside a Packet Error Rate (PER) analytical model, simulation results show that this receiver presents a better performance when compared with a regular system,with higher system throughputs and a lower Energy per Useful Packet (EPUP)

Signal design and Theoretical bounds for Time-Of-Arrival estimation in GNSS applications

Positioning accuracy in satellite navigation systems depends on time-delay estimation (TDE) between satellite transmitted codes and local receiver replicas. This thesis is specifically focused on the problem of improving time delay estimation (TDE) accuracy of SS signals, focusing on the fundamental issue of estimation theory and on the properties of the transmitted signal. TDE fundamentals limits are deeply investigated, encompassing the Cram´er Rao Bound and the Ziv-Zakai Bound, and their modified versions to lighten their computation in presence of unknown parameters, in addiction to the time delay. The adoption of the ZZB as benchmark for both acquisition and tracking stage performance is addressed, analyzing innovative or standard signalling waveforms such as Galileo SIS. The main contributions of this thesis are dealt with the analysis of applicability of spread spectrum continuous phase-modulated (SS-CPM) and spread spectrum filtered multitone (SS-FMT) as ranging signals. A special subset of CPM, labeled as “Semi-integer MSK (SiMSK)” obtained by properly setting the modulation parameters, is revealed easily adaptable to the requirements on emissions, intrinsically constant envelope and spectral efficient, while still allowing good tracking performance. Besides, an ad hoc encoding of the SS-SiMSK enables the design of a constant envelope signal bearing two different rate services, without any approximation at the transmitter side. The analysis of the multicarrier (MC) signal revealed the high degree of freedom in its design, proposing the special Filtered Multitone (FMT) modulation as possible candidate for ranging signals. The strictly bandlimited property and the full spectral flexibility possessed by the FMT are exploited in some cases of study to adapt the system to channel conditions or in particular to emulate existing or innovative spectra. For both the SSCPM and SS-FMT modulation schemes investigated, some estimation algorithms are tested and their performance are compared to the correspondent theoretical bound