Combinational multiple-valued circuit design by generalised disjunctive decomposition

A design of multiple-valued circuits based on the multiple-valued programmable logic arrays (MV PLA’s) by generalized disjunctive decomposition is presented. Main subjects are 1) Generalized disjunctive decomposition of multiple-valued functions using multiple-terminal multiplevalued decision diagrams (MTMDD’s); 2) Realization of functions by MV PLA-based combinatorial circuits

Decomposition tool targeting FPGA architectures

The growing interest in the field of logic synthesis targeting Field Programmable Gate Arrays (FPGA) and the active research carried out by a number of research groups in the area of functional decomposition is the prime motivation for this thesis. Logic synthesis has been an area of interest in many universities all over the world. The work involves the study and implementation of techniques and methods in logic synthesis. In this work, a logic synthesis tool has been developed implementing the aspects of general and complete Decomposition method based on functional decomposition techniques [4]. The tool is aimed at producing outputs faster and more efficient than the available software. C++ Standard template library is used to develop this tool. The output of this tool is designed to be compatible with the available vendor software. The tool has been tested on MCNC benchmarks and those created keeping in mind the industry requirements

A FPGA system for QRS complex detection based on Integer Wavelet Transform

Due to complexity of their mathematical computation, many QRS detectors are implemented in software and cannot operate in real time. The paper presents a real-time hardware based solution for this task. To filter ECG signal and to extract QRS complex it employs the Integer Wavelet Transform. The system includes several components and is incorporated in a single FPGA chip what makes it suitable for direct embedding in medical instruments or wearable health care devices. It has sufficient accuracy (about 95%), showing remarkable noise immunity and low cost. Additionally, each system component is composed of several identical blocks/cells what makes the design highly generic. The capacity of today existing FPGAs allows even dozens of detectors to be placed in a single chip. After the theoretical introduction of wavelets and the review of their application in QRS detection, it will be shown how some basic wavelets can be optimized for easy hardware implementation. For this purpose the migration to the integer arithmetic and additional simplifications in calculations has to be done. Further, the system architecture will be presented with the demonstrations in both, software simulation and real testing. At the end, the working performances and preliminary results will be outlined and discussed. The same principle can be applied with other signals where the hardware implementation of wavelet transform can be of benefit

Minimize Logic Synthesis FPGA – Extraction And Substitution Problems

The objective of multi-level logic synthesis of FPGA is to find the “best” multi-level structure, where “best” in this case means an equivalent presentation that is optimal with respect to various parameters such as size, speed or power consumption... Five basic operations are used in order to reach this goal: decomposition, extraction, factoring, substitution and collapsing. In this paper we propose a novel application of Walsh spectral transformation to the evaluation of Boolean function correlation. In particular, we present an algorithm with approach to solve the problems of extraction and substitution based on the use of Walsh spectral presentation. The method, operating in the transform domain, has appeared to be more advantageous than traditional approaches, using operations in the Boolean domain, concerning both memory occupation and execution time on some classes of functions

Significance of Logic Synthesis in FPGA-Based Design of Image and Signal Processing Systems

This chapter, taking FIR filters as an example, presents the discussion on efficiency of different implementation methodologies of DSP algorithms targeting modern FPGA architectures. Nowadays, programmable technology provides the possibility to implement digital systems with the use of specialized embedded DSP blocks. However, this technology gives the designer the possibility to increase efficiency of designed systems by exploitation of parallelisms of implemented algorithms. Moreover, it is possible to apply special techniques, such as distributed arithmetic (DA). Since in this approach, general-purpose multipliers are replaced by combinational LUT blocks, it is possible to construct digital filters of very high performance. Additionally, application of the functional decomposition-based method to LUT blocks optimization, and mapping has been investigated. The chapter presents results of the comparison of various design approaches in these areas

Routing, Driven Placement for ATMEL 6000 Architecture FPGAs

Based on the concept of Cell Binary Tree (CBT), a new technique for mapping combination circuits into ATMEL 6000 Architecture FPGAs is presented in this thesis. Cell Binary Tree (CBT) is a net-list representation of combinational circuits. For each node of CBT there is a distinguished variable associated with it, the node itself represents a certain logic function, which is selected according to target FPGA architecture. The proposed CBT placement algorithms preserve local connectivity and allow better mapping into ATMEL FPGA. Experiments reveal that the new mapping technique achieved reduction in a number buses used for routing comparing with previously proposed Modified Squashed Binary Tree (MSBT) approach and possibly reduction of area as well. In general, the new technique is realized through following four major steps: 1. Grouping and generating CBT: This is a step to read blifformat file, which is the result of logic synthesis, into a CBT data structure through grouping algorithm, which is a process of gathering logic functions into nodes for mapping based on a targeted FPGA architecture. The main objective of creating CBT is to generate a minimum number of nodes (or cells) to be mapped. 2. CBT placement: Upon getting the minimum number of nodes in CBT to be mapped, the next step is to map those nodes into cells in FPGA. The significance of the placement method in this thesis is to lineup the cells with the same variable into the same row in the FPGA. 3. Bus Assignment: The process of assigning variables to local buses, which run in two possible directions; horizontal and vertical. ATMEL 6000 has two horizontal buses and two vertical buses for each cell. The assignment is based on the number of times a variable appears in a row or column. 4. Routing: The last stage of the process is the connecting cells which have the same input variable. One of the important steps in the routing process is to choose connection bridge cells with the minimum impact on the area

Division-based versus general decomposition-based multiple-level logic synthesis

During the last decade, many different approaches have been proposed to solve the multiple-level synthesis problem with different minimum functionally complete systems of primitive logic blocks. The most popular of them is the division-based approach. However, modem microelectronic technology provides a large variety of building blocks which considerably differ from those typically considered. The traditional methods are therefore not suitable for synthesis with many modem building blocks. Furthermore, they often fail to find global optima for complex designs and leave unconsidered some important design aspects. Some of their weaknesses can be eliminated without leaving the paradigm they are based on, other ones are more fundamental. A paradigm which enables efficient exploitation of the opportunities created by the microelectronic technology is the general decomposition paradigm. The aim of this paper is to analyze and compare the general decomposition approach and the division-based approach. The most important advantages of the general decomposition approach are its generality (any network of any building blocks can be considered) and totality (all important design aspects can be considered) as well as handling the incompletely specified functions in a natural way. In many cases, the general decomposition approach gives much better results than the traditional approaches