Quality of service over ATM networks

PhDAbstract not availabl

A new charging scheme for ATM based on QoS

PhDNew services are emerging rapidly within the world of telecommunications. Charging strategies that were appropriate for individual transfer capabilities are no longer appropriate for an integrated broadband communications network. There is currently a range of technologies (such as cable television, telephony and narrow band ISDN) for the different services in use and a limited number of charging schemes are applicable for each of the underlying technologies irrespective of the services used over it. Difficulties arise when a wide range of services has to be supported on the same integrated technology such as asynchronous transfer mode (ATM); in such cases the type of service in use and the impact it has on the network becomes much more important. The subject of this thesis, therefore, is the charging strategies for integrated broadband communications networks. That is, the identification of the requirements associated with ATM charging schemes and the proposal of a new approach to charging for ATM called the “quality of service based charging scheme”. Charging for ATM is influenced by three important components: the type and content of a service being offered; the type of customer using the services; and the traffic characteristics belonging to the application supporting the services. The first two issues will largely be dependent on the business and regulatory requirements of the operators. The last item, and an essential one for ATM, is the bridge between technology and business; how are the resources used by a service quantified? Charging that is based on resource usage at the network level was the prime focus of the research reported here. With the proposed charging scheme, a distinction is first made between the four different ATM transfer capabilities that will support various services and the different quality of service requirements that may be applicable to each of them. Then, resources are distributed among buffers set-up to support the combination of these transfer capabilities and quality of services. The buffers are dimensioned according to the M/D/1/K and the ND/D/1 queuing analysis to determine the buffer efficiency and quality of service requirements. This dimensioning provides the basis for fixing the price per unit of resource and time. The actual resource used by a connection is based on the volume of cells transmitted or peak cell rate allocation in combination with traffic shapers if appropriate. Shapers are also dimensioned using the quality of service parameters. Since the buffer 4 efficiency is dependent on the quality of service requirements, users (customers) of ATM networks buy quality of service. The actual price of a connection is further subjected to a number of transformations based on the size of the resource purchased, the time of the day at which a connection is made, and the geographical locality of the destination switch. It is demonstrated that the proposed charging scheme meets all the requirements of customers and of network operators. In addition the result of the comparison of the new scheme with a number of existing, prominent, ATM charging schemes is presented, showing that the performance of the proposed scheme is better in terms of meeting the expectations of both the customers and the network operators

Satellite Networks: Architectures, Applications, and Technologies

Since global satellite networks are moving to the forefront in enhancing the national and global information infrastructures due to communication satellites' unique networking characteristics, a workshop was organized to assess the progress made to date and chart the future. This workshop provided the forum to assess the current state-of-the-art, identify key issues, and highlight the emerging trends in the next-generation architectures, data protocol development, communication interoperability, and applications. Presentations on overview, state-of-the-art in research, development, deployment and applications and future trends on satellite networks are assembled

Traffic Management and Congestion Control in the ATM Network Model.

Asynchronous Transfer Mode (ATM) networking technology has been chosen by the International Telegraph and Telephony Consultative Committee (CCITT) for use on future local as well as wide area networks to handle traffic types of a wide range. It is a cell based network architecture that resembles circuit switched networks, providing Quality of Service (QoS) guarantees not normally found on data networks. Although the specifications for the architecture have been continuously evolving, traffic congestion management techniques for ATM networks have not been very well defined yet. This thesis studies the traffic management problem in detail, provides some theoretical understanding and presents a collection of techniques to handle the problem under various operating conditions. A detailed simulation of various ATM traffic types is carried out and the collected data is analyzed to gain an insight into congestion formation patterns. Problems that may arise during migration planning from legacy LANs to ATM technology are also considered. We present an algorithm to identify certain portions of the network that should be upgraded to ATM first. The concept of adaptive burn-in is introduced to help ease the computational costs involved in virtual circuit setup and tear down operations

Resource management for multimedia traffic over ATM broadband satellite networks

PhDAbstract not availabl

Optimization of ATM Telecommunication Networks

ATM network optimization problems defined as combinatorial optimization problems are considered. Several approximate algorithms for solving such problems are developed. Results of their comparison by experiments on a set of problems with random input data are presented

Variable bit rate voice over ATM using compression and silence removal

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1997.Includes bibliographical references (leaves 45-46).by Mario A. Yearwood.M.Eng

Application of an automatically designed fuzzy logic decision support system to connection admission control in ATM networks

PhDAbstract not availabl

Some aspects of traffic control and performance evaluation of ATM networks

The emerging high-speed Asynchronous Transfer Mode (ATM) networks are expected to integrate through statistical multiplexing large numbers of traffic sources having a broad range of statistical characteristics and different Quality of Service (QOS) requirements. To achieve high utilisation of network resources while maintaining the QOS, efficient traffic management strategies have to be developed. This thesis considers the problem of traffic control for ATM networks. The thesis studies the application of neural networks to various ATM traffic control issues such as feedback congestion control, traffic characterization, bandwidth estimation, and Call Admission Control (CAC). A novel adaptive congestion control approach based on a neural network that uses reinforcement learning is developed. It is shown that the neural controller is very effective in providing general QOS control. A Finite Impulse Response (FIR) neural network is proposed to adaptively predict the traffic arrival process by learning the relationship between the past and future traffic variations. On the basis of this prediction, a feedback flow control scheme at input access nodes of the network is presented. Simulation results demonstrate significant performance improvement over conventional control mechanisms. In addition, an accurate yet computationally efficient approach to effective bandwidth estimation for multiplexed connections is investigated. In this method, a feed forward neural network is employed to model the nonlinear relationship between the effective bandwidth and the traffic situations and a QOS measure. Applications of this approach to admission control, bandwidth allocation and dynamic routing are also discussed. A detailed investigation has indicated that CAC schemes based on effective bandwidth approximation can be very conservative and prevent optimal use of network resources. A modified effective bandwidth CAC approach is therefore proposed to overcome the drawback of conventional methods. Considering statistical multiplexing between traffic sources, we directly calculate the effective bandwidth of the aggregate traffic which is modelled by a two-state Markov modulated Poisson process via matching four important statistics. We use the theory of large deviations to provide a unified description of effective bandwidths for various traffic sources and the associated ATM multiplexer queueing performance approximations, illustrating their strengths and limitations. In addition, a more accurate estimation method for ATM QOS parameters based on the Bahadur-Rao theorem is proposed, which is a refinement of the original effective bandwidth approximation and can lead to higher link utilisation

Dynamic bandwidth allocation in ATM networks

Includes bibliographical references.This thesis investigates bandwidth allocation methodologies to transport new emerging bursty traffic types in ATM networks. However, existing ATM traffic management solutions are not readily able to handle the inevitable problem of congestion as result of the bursty traffic from the new emerging services. This research basically addresses bandwidth allocation issues for bursty traffic by proposing and exploring the concept of dynamic bandwidth allocation and comparing it to the traditional static bandwidth allocation schemes