Performance Analysis of Shared-Memory Bus-Based Multiprocessors Using Timed Petri Nets

In shared-memory bus-based multiprocessors, the number of processors is often limited by the (shared) bus; when the utilization of the bus approaches 100%, processors spend an increasing amount of time waiting to get access to the bus (and shared memory) and this degrades their performance. The limitations imposed by the bus depend upon many parameters, and different parameters affect the performance in different ways. This chapter uses timed Petri nets to model shared-memory bus-based multiprocessors at the instruction execution level and shows how the performance of processors and the system are affected by different modeling parameters. Discrete-event simulation of the developed net models is used to get performance results

Exploiting Inter- and Intra-Memory Asymmetries for Data Mapping in Hybrid Tiered-Memories

Modern computing systems are embracing hybrid memory comprising of DRAM and non-volatile memory (NVM) to combine the best properties of both memory technologies, achieving low latency, high reliability, and high density. A prominent characteristic of DRAM-NVM hybrid memory is that it has NVM access latency much higher than DRAM access latency. We call this inter-memory asymmetry. We observe that parasitic components on a long bitline are a major source of high latency in both DRAM and NVM, and a significant factor contributing to high-voltage operations in NVM, which impact their reliability. We propose an architectural change, where each long bitline in DRAM and NVM is split into two segments by an isolation transistor. One segment can be accessed with lower latency and operating voltage than the other. By introducing tiers, we enable non-uniform accesses within each memory type (which we call intra-memory asymmetry), leading to performance and reliability trade-offs in DRAM-NVM hybrid memory. We extend existing NVM-DRAM OS in three ways. First, we exploit both inter- and intra-memory asymmetries to allocate and migrate memory pages between the tiers in DRAM and NVM. Second, we improve the OS's page allocation decisions by predicting the access intensity of a newly-referenced memory page in a program and placing it to a matching tier during its initial allocation. This minimizes page migrations during program execution, lowering the performance overhead. Third, we propose a solution to migrate pages between the tiers of the same memory without transferring data over the memory channel, minimizing channel occupancy and improving performance. Our overall approach, which we call MNEME, to enable and exploit asymmetries in DRAM-NVM hybrid tiered memory improves both performance and reliability for both single-core and multi-programmed workloads.Comment: 15 pages, 29 figures, accepted at ACM SIGPLAN International Symposium on Memory Managemen

Improving Phase Change Memory Performance with Data Content Aware Access

A prominent characteristic of write operation in Phase-Change Memory (PCM) is that its latency and energy are sensitive to the data to be written as well as the content that is overwritten. We observe that overwriting unknown memory content can incur significantly higher latency and energy compared to overwriting known all-zeros or all-ones content. This is because all-zeros or all-ones content is overwritten by programming the PCM cells only in one direction, i.e., using either SET or RESET operations, not both. In this paper, we propose data content aware PCM writes (DATACON), a new mechanism that reduces the latency and energy of PCM writes by redirecting these requests to overwrite memory locations containing all-zeros or all-ones. DATACON operates in three steps. First, it estimates how much a PCM write access would benefit from overwriting known content (e.g., all-zeros, or all-ones) by comprehensively considering the number of set bits in the data to be written, and the energy-latency trade-offs for SET and RESET operations in PCM. Second, it translates the write address to a physical address within memory that contains the best type of content to overwrite, and records this translation in a table for future accesses. We exploit data access locality in workloads to minimize the address translation overhead. Third, it re-initializes unused memory locations with known all-zeros or all-ones content in a manner that does not interfere with regular read and write accesses. DATACON overwrites unknown content only when it is absolutely necessary to do so. We evaluate DATACON with workloads from state-of-the-art machine learning applications, SPEC CPU2017, and NAS Parallel Benchmarks. Results demonstrate that DATACON significantly improves system performance and memory system energy consumption compared to the best of performance-oriented state-of-the-art techniques.Comment: 18 pages, 21 figures, accepted at ACM SIGPLAN International Symposium on Memory Management (ISMM

Image Feature Extraction Acceleration

Image feature extraction is instrumental for most of the best-performing algorithms in computer vision. However, it is also expensive in terms of computational and memory resources for embedded systems due to the need of dealing with individual pixels at the earliest processing levels. In this regard, conventional system architectures do not take advantage of potential exploitation of parallelism and distributed memory from the very beginning of the processing chain. Raw pixel values provided by the front-end image sensor are squeezed into a high-speed interface with the rest of system components. Only then, after deserializing this massive dataflow, parallelism, if any, is exploited. This chapter introduces a rather different approach from an architectural point of view. We present two Application-Specific Integrated Circuits (ASICs) where the 2-D array of photo-sensitive devices featured by regular imagers is combined with distributed memory supporting concurrent processing. Custom circuitry is added per pixel in order to accelerate image feature extraction right at the focal plane. Specifically, the proposed sensing-processing chips aim at the acceleration of two flagships algorithms within the computer vision community: the Viola-Jones face detection algorithm and the Scale Invariant Feature Transform (SIFT). Experimental results prove the feasibility and benefits of this architectural solution.Ministerio de Economía y Competitividad TEC2012-38921-C02, IPT-2011- 1625-430000, IPC-20111009Junta de Andalucía TIC 2338-2013Xunta de Galicia EM2013/038Office of NavalResearch (USA) N00014141035

Modeling and Analysis of Dual Block Multithreading

Instruction level multithreading is a technique for tolerating long– latency operations (e.g., cache misses) by switching the processor to another thread instead of waiting for the completion of a lengthy operation. In block mul- tithreading, context switching occurs for each initiated long–latency operation. However, processor cycles during pipeline stalls as well as during context switch- ing are not used in typical block multithreading, reducing the performance of a processor. Dual block multithreading introduces a second active thread which is used for instruction issuing whenever the original (main) thread becomes in- active. Dual block multithreading can be regarded as a simple and specialized case of simultaneous multithreading when two (simultaneous) threads are used to issue instructions for a single pipeline. The paper develops a simple timed Petri net model of a dual block multithreading and uses this model to estimate the performance improvements of the proposed dual block multithreading

A COMPREHENSIVE HDL MODEL OF A LINE ASSOCIATIVE REGISTER BASED ARCHITECTURE

Modern processor architectures suffer from an ever increasing gap between processor and memory performance. The current memory-register model attempts to hide this gap by a system of cache memory. Line Associative Registers(LARs) are proposed as a new system to avoid the memory gap by pre-fetching and associative updating of both instructions and data. This thesis presents a fully LAR-based architecture, targeting a previously developed instruction set architecture. This architecture features an execution pipeline supporting SWAR operations, and a memory system supporting the associative behavior of LARs and lazy writeback to memory