1,540 research outputs found
Heterogeneous V2V Communications in Multi-Link and Multi-RAT Vehicular Networks
Connected and automated vehicles will enable advanced traffic safety and
efficiency applications thanks to the dynamic exchange of information between
vehicles, and between vehicles and infrastructure nodes. Connected vehicles can
utilize IEEE 802.11p for vehicle-to-vehicle (V2V) and vehicle-to-infrastructure
(V2I) communications. However, a widespread deployment of connected vehicles
and the introduction of connected automated driving applications will notably
increase the bandwidth and scalability requirements of vehicular networks. This
paper proposes to address these challenges through the adoption of
heterogeneous V2V communications in multi-link and multi-RAT vehicular
networks. In particular, the paper proposes the first distributed (and
decentralized) context-aware heterogeneous V2V communications algorithm that is
technology and application agnostic, and that allows each vehicle to
autonomously and dynamically select its communications technology taking into
account its application requirements and the communication context conditions.
This study demonstrates the potential of heterogeneous V2V communications, and
the capability of the proposed algorithm to satisfy the vehicles' application
requirements while approaching the estimated upper bound network capacity
Understanding the limits of LoRaWAN
The quick proliferation of LPWAN networks, being LoRaWAN one of the most
adopted, raised the interest of the industry, network operators and facilitated
the development of novel services based on large scale and simple network
structures. LoRaWAN brings the desired ubiquitous connectivity to enable most
of the outdoor IoT applications and its growth and quick adoption are real
proofs of that. Yet the technology has some limitations that need to be
understood in order to avoid over-use of the technology. In this article we aim
to provide an impartial overview of what are the limitations of such
technology, and in a comprehensive manner bring use case examples to show where
the limits are
Outage analysis of superposition modulation aided network coded cooperation in the presence of network coding noise
We consider a network, where multiple sourcedestination pairs communicate with the aid of a half-duplex relay node (RN), which adopts decode-forward (DF) relaying and superposition-modulation (SPM) for combining the signals transmitted by the source nodes (SNs) and then forwards the composite signal to all the destination nodes (DNs). Each DN extracts the signals transmitted by its own SN from the composite signal by subtracting the signals overheard from the unwanted SNs. We derive tight lower-bounds for the outage probability for transmission over Rayleigh fading channels and invoke diversity combining at the DNs, which is validated by simulation for both the symmetric and the asymmetric network configurations. For the high signal-to-noise ratio regime, we derive both an upperbound as well as a lower-bound for the outage performance and analyse the achievable diversity gain. It is revealed that a diversity order of 2 is achieved, regardless of the number of SN-DN pairs in the network. We also highlight the fact that the outage performance is dominated by the quality of the worst overheated link, because it contributes most substantially to the network coding noise. Finally, we use the lower bound for designing a relay selection scheme for the proposed SPM based network coded cooperative communication (SPM-NC-CC) system.<br/
Cross-layer Balanced and Reliable Opportunistic Routing Algorithm for Mobile Ad Hoc Networks
For improving the efficiency and the reliability of the opportunistic routing
algorithm, in this paper, we propose the cross-layer and reliable opportunistic
routing algorithm (CBRT) for Mobile Ad Hoc Networks, which introduces the
improved efficiency fuzzy logic and humoral regulation inspired topology
control into the opportunistic routing algorithm. In CBRT, the inputs of the
fuzzy logic system are the relative variance (rv) of the metrics rather than
the values of the metrics, which reduces the number of fuzzy rules
dramatically. Moreover, the number of fuzzy rules does not increase when the
number of inputs increases. For reducing the control cost, in CBRT, the node
degree in the candidate relays set is a range rather than a constant number.
The nodes are divided into different categories based on their node degree in
the candidate relays set. The nodes adjust their transmission range based on
which categories that they belong to. Additionally, for investigating the
effection of the node mobility on routing performance, we propose a link
lifetime prediction algorithm which takes both the moving speed and moving
direction into account. In CBRT, the source node determines the relaying
priorities of the relaying nodes based on their utilities. The relaying node
which the utility is large will have high priority to relay the data packet. By
these innovations, the network performance in CBRT is much better than that in
ExOR, however, the computation complexity is not increased in CBRT.Comment: 14 pages, 17 figures, 31 formulas, IEEE Sensors Journal, 201
Energy management in communication networks: a journey through modelling and optimization glasses
The widespread proliferation of Internet and wireless applications has
produced a significant increase of ICT energy footprint. As a response, in the
last five years, significant efforts have been undertaken to include
energy-awareness into network management. Several green networking frameworks
have been proposed by carefully managing the network routing and the power
state of network devices.
Even though approaches proposed differ based on network technologies and
sleep modes of nodes and interfaces, they all aim at tailoring the active
network resources to the varying traffic needs in order to minimize energy
consumption. From a modeling point of view, this has several commonalities with
classical network design and routing problems, even if with different
objectives and in a dynamic context.
With most researchers focused on addressing the complex and crucial
technological aspects of green networking schemes, there has been so far little
attention on understanding the modeling similarities and differences of
proposed solutions. This paper fills the gap surveying the literature with
optimization modeling glasses, following a tutorial approach that guides
through the different components of the models with a unified symbolism. A
detailed classification of the previous work based on the modeling issues
included is also proposed
SCALABLE MULTI-HOP DATA DISSEMINATION IN VEHICULAR AD HOC NETWORKS
Vehicular Ad hoc Networks (VANETs) aim at improving road safety and travel comfort, by providing self-organizing environments to disseminate traffic data, without requiring fixed infrastructure or centralized administration. Since traffic data is of public interest and usually benefit a group of users rather than a specific individual, it is more appropriate to rely on broadcasting for data dissemination in VANETs. However, broadcasting under dense networks suffers from high percentage of data redundancy that wastes the limited radio channel bandwidth. Moreover, packet collisions may lead to the broadcast storm problem when large number of vehicles in the same vicinity rebroadcast nearly simultaneously. The broadcast storm problem is still challenging in the context of VANET, due to the rapid changes in the network topology, which are difficult to predict and manage. Existing solutions either do not scale well under high density scenarios, or require extra communication overhead to estimate traffic density, so as to manage data dissemination accordingly. In this dissertation, we specifically aim at providing an efficient solution for the broadcast storm problem in VANETs, in order to support different types of applications. A novel approach is developed to provide scalable broadcast without extra communication overhead, by relying on traffic regime estimation using speed data. We theoretically validate the utilization of speed instead of the density to estimate traffic flow. The results of simulating our approach under different density scenarios show its efficiency in providing scalable multi-hop data dissemination for VANETs
Scalability of broadcast performance in wireless network-on-chip
Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version
- …