Quality of service aware data dissemination in vehicular Ad Hoc networks

Des systèmes de transport intelligents (STI) seront éventuellement fournis dans un proche avenir pour la sécurité et le confort des personnes lors de leurs déplacements sur les routes. Les réseaux ad-hoc véhiculaires (VANETs) représentent l'élément clé des STI. Les VANETs sont formés par des véhicules qui communiquent entre eux et avec l'infrastructure. En effet, les véhicules pourront échanger des messages qui comprennent, par exemple, des informations sur la circulation routière, les situations d'urgence et les divertissements. En particulier, les messages d'urgence sont diffusés par des véhicules en cas d'urgence (p.ex. un accident de voiture); afin de permettre aux conducteurs de réagir à temps (p.ex., ralentir), les messages d'urgence doivent être diffusés de manière fiable dans un délai très court. Dans les VANETs, il existe plusieurs facteurs, tels que le canal à pertes, les terminaux cachés, les interférences et la bande passante limitée, qui compliquent énormément la satisfaction des exigences de fiabilité et de délai des messages d'urgence. Dans cette thèse, en guise de première contribution, nous proposons un schéma de diffusion efficace à plusieurs sauts, appelé Dynamic Partitioning Scheme (DPS), pour diffuser les messages d'urgence. DPS calcule les tailles de partitions dynamiques et le calendrier de transmission pour chaque partition; à l'intérieur de la zone arrière de l'expéditeur, les partitions sont calculées de sorte qu'en moyenne chaque partition contient au moins un seul véhicule; l'objectif est de s'assurer que seul un véhicule dans la partition la plus éloignée (de l'expéditeur) est utilisé pour diffuser le message, jusqu'au saut suivant; ceci donne lieu à un délai d'un saut plus court. DPS assure une diffusion rapide des messages d'urgence. En outre, un nouveau mécanisme d'établissement de liaison, qui utilise des tonalités occupées, est proposé pour résoudre le problème du problème de terminal caché. Dans les VANETs, la Multidiffusion, c'est-à-dire la transmission d'un message d'une source à un nombre limité de véhicules connus en tant que destinations, est très importante. Par rapport à la diffusion unique, avec Multidiffusion, la source peut simultanément prendre en charge plusieurs destinations, via une arborescence de multidiffusion, ce qui permet d'économiser de la bande passante et de réduire la congestion du réseau. Cependant, puisque les VANETs ont une topologie dynamique, le maintien de la connectivité de l'arbre de multidiffusion est un problème majeur. Comme deuxième contribution, nous proposons deux approches pour modéliser l'utilisation totale de bande passante d'une arborescence de multidiffusion: (i) la première approche considère le nombre de segments de route impliqués dans l'arbre de multidiffusion et (ii) la seconde approche considère le nombre d'intersections relais dans l'arbre de multidiffusion. Une heuristique est proposée pour chaque approche. Pour assurer la qualité de service de l'arbre de multidiffusion, des procédures efficaces sont proposées pour le suivi des destinations et la surveillance de la qualité de service des segments de route. Comme troisième contribution, nous étudions le problème de la congestion causée par le routage du trafic de données dans les VANETs. Nous proposons (1) une approche de routage basée sur l’infonuagique qui, contrairement aux approches existantes, prend en compte les chemins de routage existants qui relaient déjà les données dans les VANETs. Les nouvelles demandes de routage sont traitées de sorte qu'aucun segment de route ne soit surchargé par plusieurs chemins de routage croisés. Au lieu d'acheminer les données en utilisant des chemins de routage sur un nombre limité de segments de route, notre approche équilibre la charge des données en utilisant des chemins de routage sur l'ensemble des tronçons routiers urbains, dans le but d'empêcher, dans la mesure du possible, les congestions locales dans les VANETs; et (2) une approche basée sur le réseau défini par logiciel (SDN) pour surveiller la connectivité VANET en temps réel et les délais de transmission sur chaque segment de route. Les données de surveillance sont utilisées en entrée de l'approche de routage.Intelligent Transportation Systems (ITS) will be eventually provided in the near future for both safety and comfort of people during their travel on the roads. Vehicular ad-hoc Networks (VANETs), represent the key component of ITS. VANETs consist of vehicles that communicate with each other and with the infrastructure. Indeed, vehicles will be able to exchange messages that include, for example, information about road traffic, emergency situations, and entertainment. Particularly, emergency messages are broadcasted by vehicles in case of an emergency (e.g., car accident); in order to allow drivers to react in time (e.g., slow down), emergency messages must be reliably disseminated with very short delay. In VANETs, there are several factors, such as lossy channel, hidden terminals, interferences and scarce bandwidth, which make satisfying reliability and delay requirements of emergency messages very challenging. In this thesis, as the first contribution, we propose a reliable time-efficient and multi-hop broadcasting scheme, called Dynamic Partitioning Scheme (DPS), to disseminate emergency messages. DPS computes dynamic partition sizes and the transmission schedule for each partition; inside the back area of the sender, the partitions are computed such that in average each partition contains at least a single vehicle; the objective is to ensure that only a vehicle in the farthest partition (from the sender) is used to disseminate the message, to next hop, resulting in shorter one hop delay. DPS ensures fast dissemination of emergency messages. Moreover, a new handshaking mechanism, that uses busy tones, is proposed to solve the problem of hidden terminal problem. In VANETs, Multicasting, i.e. delivering a message from a source to a limited known number of vehicles as destinations, is very important. Compared to Unicasting, with Multicasting, the source can simultaneously support multiple destinations, via a multicast tree, saving bandwidth and reducing overall communication congestion. However, since VANETs have a dynamic topology, maintaining the connectivity of the multicast tree is a major issue. As the second contribution, we propose two approaches to model total bandwidth usage of a multicast tree: (i) the first approach considers the number of road segments involved in the multicast tree and (ii) the second approach considers the number of relaying intersections involved in the multicast tree. A heuristic is proposed for each approach. To ensure QoS of the multicasting tree, efficient procedures are proposed for tracking destinations and monitoring QoS of road segments. As the third contribution, we study the problem of network congestion in routing data traffic in VANETs. We propose (1) a Cloud-based routing approach that, in opposition to existing approaches, takes into account existing routing paths which are already relaying data in VANETs. New routing requests are processed such that no road segment gets overloaded by multiple crossing routing paths. Instead of routing over a limited set of road segments, our approach balances the load of communication paths over the whole urban road segments, with the objective to prevent, whenever possible, local congestions in VANETs; and (2) a Software Defined Networking (SDN) based approach to monitor real-time VANETs connectivity and transmission delays on each road segment. The monitoring data is used as input to the routing approach

JTIT

kwartalni

The Pull Paradigm : foundations of user-centric advanced driver assistant systems based on bidirectional car2X communication

This thesis develops applications for vehicular ad-hoc networks that go far beyond the currently established areas of driving safety and traffic efficiency. The ad-hoc network is regarded as a dynamic information resource which is available to any vehicle at any time. In contrast to current state-of-the-art research, the proposed Pull Paradigm starts at the user\u27s vehicle rather than at an information source somewhere in the network, e.g. a braking car. To access information from highly dynamic ad-hoc networks, bidirectional communication and information discovery and retrieval play a vital role. Therefore, in the course of the work, the applicability of the Pull Paradigm to established vehicular ad-hoc networks is thoroughly examined and missing aspects are identified. It turns out that a number of enhancements to almost all layers of the network stack are necessary in order to apply the Pull Paradigm using existing technology. The central elements here are two novel algorithms for managing information flow and dissemination in ad-hoc networks, which are at first formulated from the abstract perspective of graph theory. Using the knowledge gained leads to the development of PADE, a platform that supports development of vehicular ad-hoc network applications. The designed algorithms are then implemented as a routing scheme, integrated and evaluated in large, simulated city scenarios. Furthermore, PADE combines real\u27\u27 and simulated communication technologies and abstracts from them, so that applications can be transferred from the lab into a test vehicle with minimal effort. In order to achieve this ambitious goal, PADE builds on a number of existing simulation and communication technologies. The practical applicability of the Pull approach is shown in two demonstrators that are integrated into a BMW 5 series test vehicle. The presentation module of the PADE platform was tested in the currently largest field operational test for vehicular ad-hoc communication. Over 400 drivers in 120 vehicles experienced the system on a daily basis.In dieser Doktorarbeit werden Anwendungen für Fahrzeug Ad-hoc Netzwerke erarbeitet, die weit über die derzeit etablierten Bereiche der Fahrsicherheit und Verkehrseffizienz hinausgehen. Das Ad-hoc Netzwerk wird dabei als dynamische Informationsressource angesehen, die jedem Fahrzeug zu jedem Zeitpunkt zur Verfügung steht. Im Gegensatz zum derzeitigen Stand der Forschung geht das vorgestellte Pull Paradigma vom Fahrzeug des Benutzers und nicht von der Informationsquelle aus, z.B. einem bremsenden Fahrzeug. Für den Zugriff auf Informationen aus hochdynamischen Ad-hoc Netzen, spielen bidirektionale Kommunikation, Informationssuche und -rücktransport eine entscheidende Rolle. Im Verlauf der Arbeit wird deshalb die Anwendbarkeit des Pull Paradigmas auf etablierte Fahrzeug Ad-hoc Netze untersucht und fehlende Aspekte identifiziert. Es zeigt sich, dass eine Reihe an Erweiterungen auf fast allen Ebenen des Netzwerkstapels nötig sind damit die bestehende Technologie um das Pull Paradigma erweitert werden kann. Zentraler Punkt hierbei sind zwei neuartige Algorithmen zur Informationsverwaltung und -verbreitung in Ad-hoc Netzwerken die zunächst abstrakt aus Sicht der Graphentheorie formuliert werden. Mit Hilfe der gewonnenen Erkenntnisse wird PADE, eine Plattform zur Entwicklung von Anwendungen für Fahrzeug Ad-hoc Netze, entwickelt. Die entworfenen Algorithmen werden dann als Routingverfahren im Netzwerkstapel realisiert, in diesen integriert und auf großflächigen Stadtszenarien im Simulator evaluiert. Des Weiteren vereint PADE echte\u27\u27 und simulierte Kommunikationstechnologien und abstrahiert von diesen, sodass Anwendungen mit minimalem Aufwand vom Labor in ein Testfahrzeug überführt werden können. Um dieses ambitionierte Ziel zu erreichen, wird auf einer Reihe bereits bestehender Simulations- und Kommunikationstechnologien aufgebaut. Die praktische Anwendbarkeit des Pull Paradigmas wird anschließend in zwei Demonstratoren implementiert und in ein BMW 5er Testfahrzeug integriert. Das Präsentationsmodul der PADE Plattform wurde im derzeit weltgrößten Feldversuch für Fahrzeug Ad-hoc Kommunikation von über 400 Fahrern in 120 Fahrzeugen im Alltag getestet

Cooperative & cost-effective network selection: a novel approach to support location-dependent & context-aware service migration in VANETs

Vehicular networking has gained considerable interest within the research community and industry. This class of mobile ad hoc network expects to play a vital role in the design and deployment of intelligent transportation systems. The research community expects to launch several innovative applications over Vehicular Ad hoc Networks (VANETs). The automotive industry is supporting the notion of pervasive connectivity by agreeing to equip vehicles with devices required for vehicular ad hoc networking. Equipped with these devices, mobile nodes in VANETs are capable of hosting many types of applications as services for other nodes in the network. These applications or services are classified as safety-critical (failure or unavailability of which may lead to a life threat) and non-safety-critical (failure of which do not lead to a life threat). Safety-critical and non-safety-critical applications need to be supported concurrently within VANETs. This research covers non-safety-critical applications since the research community has overlooked this class of applications. More specifically, this research focuses on VANETs services that are location-dependent. Due to high speed mobility, VANETs are prone to intermittent network connectivity. It is therefore envisioned that location-dependence and intermittent network connectivity are the two major challenges for VANETs to host and operate non-safety-critical VANETs services. The challenges are further exacerbated when the area where the services are to be deployed is unplanned i.e. lacks communication infrastructure and planning. Unplanned areas show irregular vehicular traffic on the road. Either network traffic flows produced by irregular vehicular traffic may lead to VANETs communication channel congestion, or it may leave the communication channel under-utilized. In both cases, this leads to communication bottlenecks within VANETs. This dissertation investigates the shortcomings of location-dependence, intermittent network connectivity and irregular network traffic flows and addresses them by exploiting location-dependent service migration over an integrated network in an efficient and cost-effective manner

Smart Sensor Technologies for IoT

The recent development in wireless networks and devices has led to novel services that will utilize wireless communication on a new level. Much effort and resources have been dedicated to establishing new communication networks that will support machine-to-machine communication and the Internet of Things (IoT). In these systems, various smart and sensory devices are deployed and connected, enabling large amounts of data to be streamed. Smart services represent new trends in mobile services, i.e., a completely new spectrum of context-aware, personalized, and intelligent services and applications. A variety of existing services utilize information about the position of the user or mobile device. The position of mobile devices is often achieved using the Global Navigation Satellite System (GNSS) chips that are integrated into all modern mobile devices (smartphones). However, GNSS is not always a reliable source of position estimates due to multipath propagation and signal blockage. Moreover, integrating GNSS chips into all devices might have a negative impact on the battery life of future IoT applications. Therefore, alternative solutions to position estimation should be investigated and implemented in IoT applications. This Special Issue, “Smart Sensor Technologies for IoT” aims to report on some of the recent research efforts on this increasingly important topic. The twelve accepted papers in this issue cover various aspects of Smart Sensor Technologies for IoT

ReSCon '11, Research Student Conference: Book of Abstracts

The fourth SED Research Student Conference (ReSCon2011) was hosted over three days, 20-22 June 2011, in the Hamilton Centre at Brunel University. The conference consisted of technical presentations, a poster session and social events. which focused on current research being conducted within the School of Engineering and Design by postgraduate research students from the School. The conference is held annually, and ReSCon plays a key role in contributing to research and innovations within the School

New Waves of IoT Technologies Research – Transcending Intelligence and Senses at the Edge to Create Multi Experience Environments

The next wave of Internet of Things (IoT) and Industrial Internet of Things (IIoT) brings new technological developments that incorporate radical advances in Artificial Intelligence (AI), edge computing processing, new sensing capabilities, more security protection and autonomous functions accelerating progress towards the ability for IoT systems to self-develop, self-maintain and self-optimise. The emergence of hyper autonomous IoT applications with enhanced sensing, distributed intelligence, edge processing and connectivity, combined with human augmentation, has the potential to power the transformation and optimisation of industrial sectors and to change the innovation landscape. This chapter is reviewing the most recent advances in the next wave of the IoT by looking not only at the technology enabling the IoT but also at the platforms and smart data aspects that will bring intelligence, sustainability, dependability, autonomy, and will support human-centric solutions.acceptedVersio

Telecommunications Networks

This book guides readers through the basics of rapidly emerging networks to more advanced concepts and future expectations of Telecommunications Networks. It identifies and examines the most pressing research issues in Telecommunications and it contains chapters written by leading researchers, academics and industry professionals. Telecommunications Networks - Current Status and Future Trends covers surveys of recent publications that investigate key areas of interest such as: IMS, eTOM, 3G/4G, optimization problems, modeling, simulation, quality of service, etc. This book, that is suitable for both PhD and master students, is organized into six sections: New Generation Networks, Quality of Services, Sensor Networks, Telecommunications, Traffic Engineering and Routing

Intelligent Circuits and Systems

ICICS-2020 is the third conference initiated by the School of Electronics and Electrical Engineering at Lovely Professional University that explored recent innovations of researchers working for the development of smart and green technologies in the fields of Energy, Electronics, Communications, Computers, and Control. ICICS provides innovators to identify new opportunities for the social and economic benefits of society.　 This conference bridges the gap between academics and R&D institutions, social visionaries, and experts from all strata of society to present their ongoing research activities and foster research relations between them. It provides opportunities for the exchange of new ideas, applications, and experiences in the field of smart technologies and finding global partners for future collaboration. The ICICS-2020 was conducted in two broad categories, Intelligent Circuits & Intelligent Systems and Emerging Technologies in Electrical Engineering