Analysis of the isolation valve system in water distribution networks using the segment graph

The mechanical reliability of Water Distribution Networks (WDNs) is a relevant technical and scientific issue. During planned maintenance or unplanned interruptions, the affected area must be isolated by valves shutdown. This operation involves the alteration of the network structure, i.e., the domain of the hydraulic system, and for this reason the isolation valve system plays a central role. Some studies started to consider the presence of the isolation valve system in WDNs reliability analysis. Accordingly, this work uses the Complex Network Theory to analyse the isolation valve system performance and to assess the importance of the segments generated by valves shutdown. Differently from the classic complex network theory approach, in this work the recently proposed WDN-relevance-based betweenness centrality is applied to the segment graph to introduce information about the relevance of the different elements into the network, considering geometric and hydraulic parameters, such as length, demand, risk of disconnection, etc. The proposed strategy also suggests an improvement in the representation of the segment graph with respect to the presence of parallel edges. The strategy is presented using a small network, while it is demonstrated and discussed using a real WDN. The results indicate that the WDN-relevance-based betweenness centrality allows to effectively assess the importance of the segments generated by valves shutdowns, also providing indications to improve the isolation valve system design

Leak localization in water distribution networks using a mixed model-based/data-driven approach

“The final publication is available at Springer via http://dx.doi.org/10.1016/j.conengprac.2016.07.006”This paper proposes a new method for leak localization in water distribution networks (WDNs). In a first stage, residuals are obtained by comparing pressure measurements with the estimations provided by a WDN model. In a second stage, a classifier is applied to the residuals with the aim of determining the leak location. The classifier is trained with data generated by simulation of the WDN under different leak scenarios and uncertainty conditions. The proposed method is tested both by using synthetic and experimental data with real WDNs of different sizes. The comparison with the current existing approaches shows a performance improvement.Peer ReviewedPostprint (author's final draft

Decentralized fault-tolerant control of inland navigation networks: a challenge

Inland waterways are large-scale networks used principally for navigation. Even if the transport planning is an important issue, the water resource management is a crucial point. Indeed, navigation is not possible when there is too little or too much water inside the waterways. Hence, the water resource management of waterways has to be particularly efficient in a context of climate change and increase of water demand. This management has to be done by considering different time and space scales and still requires the development of new methodologies and tools in the topics of the Control and Informatics communities. This work addresses the problem of waterways management in terms of modeling, control, diagnosis and fault-tolerant control by focusing in the inland waterways of the north of France. A review of proposed tools and the ongoing research topics are provided in this paper.Peer ReviewedPostprint (published version

Optimal Placement of Valves in a Water Distribution Network with CLP(FD)

This paper presents a new application of logic programming to a real-life problem in hydraulic engineering. The work is developed as a collaboration of computer scientists and hydraulic engineers, and applies Constraint Logic Programming to solve a hard combinatorial problem. This application deals with one aspect of the design of a water distribution network, i.e., the valve isolation system design. We take the formulation of the problem by Giustolisi and Savic (2008) and show how, thanks to constraint propagation, we can get better solutions than the best solution known in the literature for the Apulian distribution network. We believe that the area of the so-called hydroinformatics can benefit from the techniques developed in Constraint Logic Programming and possibly from other areas of logic programming, such as Answer Set Programming.Comment: Best paper award at the 27th International Conference on Logic Programming - ICLP 2011; Theory and Practice of Logic Programming, (ICLP'11) Special Issue, volume 11, issue 4-5, 201

Improving the resilience of post-disaster water distribution systems using a dynamic optimization framework

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.Improving the resilience of water distribution systems (WDSs) to handle natural disasters (e.g., earthquakes) is a critical step towards sustainable urban water management. This requires the water utility to be able to respond quickly to such disaster events and in an organized manner, to prioritize the use of available resources to restore service rapidly whilst minimizing the negative impacts. Many methods have been developed to evaluate the WDS resilience, but few efforts are made so far to improve resilience of a post-disaster WDS through identifying optimal sequencing of recovery actions. To address this gap, a new dynamic optimization framework is proposed here where the resilience of a post-disaster WDS is evaluated using six different metrics. A tailored Genetic Algorithm is developed to solve the complex optimization problem driven by these metrics. The proposed framework is demonstrated using a real-world WDS with 6,064 pipes. Results obtained show that the proposed framework successfully identifies near-optimal sequencing of recovery actions for this complex WDS. The gained insights, conditional on the specific attributes of the case study, include: (i) the near-optimal sequencing of recovery strategy heavily depends on the damage properties of the WDS, (ii) replacements of damaged elements tend to be scheduled at the intermediate-late stages of the recovery process due to their long operation time, and (iii) interventions to damaged pipe elements near critical facilities (e.g., hospitals) should not be necessarily the first priority to recover due to complex hydraulic interactions within the WDS

Design and development of the quad redundant servoactuator for the space shuttle solid rocket booster thrust vector control

The design and theory of operation of the servoactuator used for thrust vector control of the space shuttle solid rocket booster is described accompanied by highlights from the development and qualification test programs. Specific details are presented concerning major anomalies that occurred during the test programs and the corrective courses of action pursued

Location of leaks in pipelines using parameter identification tools

This work proposes an approach to locate leaks by identifying the parameters of finite models associated with these fault events. The identification problem is attacked by using well-known identification methods such as the Prediction Error Method and extended Kalman filters. In addition, a frequency evaluation is realized to check the conditions for implementing any method which require an excitation condition.Comment: This paper has some error

System data communication structures for active-control transport aircraft, volume 2

The application of communication structures to advanced transport aircraft are addressed. First, a set of avionic functional requirements is established, and a baseline set of avionics equipment is defined that will meet the requirements. Three alternative configurations for this equipment are then identified that represent the evolution toward more dispersed systems. Candidate communication structures are proposed for each system configuration, and these are compared using trade off analyses; these analyses emphasize reliability but also address complexity. Multiplex buses are recognized as the likely near term choice with mesh networks being desirable for advanced, highly dispersed systems