Distributed space time block coding and application in cooperative cognitive relay networks

The design and analysis of various distributed space time block coding schemes for cooperative relay networks is considered in this thesis. Rayleigh frequency flat and selective fading channels are assumed to model the links in the networks, and interference suppression techniques together with an orthogonal frequency division multiplexing (OFDM) type transmission approach are employed to mitigate synchronization errors at the destination node induced by the different delays through the relay nodes. Closed-loop space time block coding is first considered in the context of decode-and-forward (regenerative) networks. In particular, quasi orthogonal and extended orthogonal coding techniques are employed for transmission from four relay nodes and parallel interference cancellation detection is exploited to mitigate synchronization errors. Availability of a direct link between the source and destination nodes is studied. Outer coding is then added to gain further improvement in end-to-end performance and amplify-and-forward (non regenerative) type networks together with distributed space time coding are considered to reduce relay node complexity. A novel detection scheme is then proposed for decode-and-forward and amplify-and-forward networks with closed-loop extended orthogonal coding and closed-loop quasi-orthogonal coding which reduce the computational complexity of the parallel interference cancellation. The near-optimum detector is presented for relay nodes with single or dual antennas. End-to-end bit error rate simulations confirm the potential of the approach and its ability to mitigate synchronization errors

Codificação distribuída em sistemas com diversidade cooperativa

Doutoramento em Engenharia ElectrotécnicaO presente trabalho propõe-se a divulgar as mais significativas técnicas de esquemas cooperativos, de forma a ultrapassar alguns dos problemas dos sistemas móveis sem fios da próxima geração, estendendo a área de cobertura destes sistemas, assim como a sua capacidade e fiabilidade. O estudo de diversos esquemas cooperativos é efetuado em termos de capacidade e de taxa de erros, fazendo variar o número de relays e de antenas em cada elemento do sistema. Diversos algoritmos com aplicação em sistemas cooperativos são desenvolvidos e propostos ao longo desta tese, como códigos espaço-frequência aplicados de forma distribuída nos relays, para sistemas baseados na tecnologia OFDM e sob diversos cenários próximos da realidade. Os sistemas cooperativos são particularmente úteis em situações em que o caminho direto entre dois terminais não está acessível ou tem uma fraca qualidade de transmissão. Tendo este aspeto em consideração, e pretendendo ter a máxima eficiência espetral e máxima diversidade, um algoritmo com precodificação é também proposto para múltiplos relays, cada um equipado com uma ou duas antenas. A formulação matemática associada aos algoritmos propostos é apresentada, assim como a derivação da probabilidade de erro teórica. O desempenho dos sistemas assistidos por relays usando os algoritmos propostos é comparado em relação a outros esquemas cooperativos equivalentes e a esquemas não-cooperativos, considerando cenários com diferentes qualidades de canal, daí advindo importantes conclusões em relação a estes sistemas.Cooperative schemes are promising solutions for cellular wireless networks aiming to improve system fairness, extend coverage and increase capacity. Measurements of these system performances are made in terms of BER and capacity for different configurations, by varying the number of relays and of antennas equipping each node. In this work we propose and evaluate distributed space-frequency codes applied to cooperative systems in a distributed way, with application in OFDM systems and considering realistic scenarios. Moreover, the use of relays is of significant interest to allow radio access in situations where a direct path is not available or has poor quality. Thus, a data precoded relay-assisted scheme is also proposed for a system cooperating with multiple relays, each equipped with either a single antenna or two-antenna array. Mathematical formulation of the proposed algorithms is derived as well as the pairwise error probability. We further present the performances of the proposed algorithms apllied in relay-assisted schemes, and compare them with equivalent cooperative and non-cooperative schemes, for several channel quality scenarios, through which important conclusions are achieved.FCT/FS

Peak to average power ratio reduction and error control in MIMO-OFDM HARQ System

Currently, multiple-input multiple-output orthogonal frequency division multiplexing (MIMOOFDM) systems underlie crucial wireless communication systems such as commercial 4G and 5G networks, tactical communication, and interoperable Public Safety communications. However, one drawback arising from OFDM modulation is its resulting high peak-to-average power ratio (PAPR). This problem increases with an increase in the number of transmit antennas. In this work, a new hybrid PAPR reduction technique is proposed for space-time block coding (STBC) MIMO-OFDM systems that combine the coding capabilities to PAPR reduction methods, while leveraging the new degree of freedom provided by the presence of multiple transmit chairs (MIMO). In the first part, we presented an extensive literature review of PAPR reduction techniques for OFDM and MIMO-OFDM systems. The work developed a PAPR reduction technique taxonomy, and analyzed the motivations for reducing the PAPR in current communication systems, emphasizing two important motivations such as power savings and coverage gain. In the tax onomy presented here, we include a new category, namely, hybrid techniques. Additionally, we drew a conclusion regarding the importance of hybrid PAPR reduction techniques. In the second part, we studied the effect of forward error correction (FEC) codes on the PAPR for the coded OFDM (COFDM) system. We simulated and compared the CCDF of the PAPR and its relationship with the autocorrelation of the COFDM signal before the inverse fast Fourier transform (IFFT) block. This allows to conclude on the main characteristics of the codes that generate high peaks in the COFDM signal, and therefore, the optimal parameters in order to reduce PAPR. We emphasize our study in FEC codes as linear block codes, and convolutional codes. Finally, we proposed a new hybrid PAPR reduction technique for an STBC MIMO-OFDM system, in which the convolutional code is optimized to avoid PAPR degradation, which also combines successive suboptimal cross-antenna rotation and inversion (SS-CARI) and iterative modified companding and filtering schemes. The new method permits to obtain a significant net gain for the system, i.e., considerable PAPR reduction, bit error rate (BER) gain as compared to the basic MIMO-OFDM system, low complexity, and reduced spectral splatter. The new hybrid technique was extensively evaluated by simulation, and the complementary cumulative distribution function (CCDF), the BER, and the power spectral density (PSD) were compared to the original STBC MIMO-OFDM signal

Signal processing for future MIMO-OFDM wireless communication systems

The combination of multiple-input multiple-output (MIMO) technology and orthogonal frequency division multiplexing (OFDM) is likely to provide the air-interface solution for future broadband wireless systems. A major challenge for MIMO-OFDM systems is the problem of multi-access interference (MAI) induced by the presence of multiple users transmitting over the same bandwidth. Novel signal processing techniques are therefore required to mitigate MAI and thereby increase link performance. A background review of space-time block codes (STBCs) to lever age diversity gain in MIMO systems is provided together with an introduction to OFDM. The link performance of an OFDM system is also shown to be sensitive to time-variation of the channel. Iterative minimum mean square error (MMSE) receivers are therefore proposed to overcome such time-variation. In the context of synchronous uplink transmission, a new two-step hard-decision interference cancellation receiver for STBC MIMO-OFDM is shown to have robust performance and relatively low complexity. Further improvement is obtained through employing error control coding methods and iterative algorithms. A soft output multiuser detector based on MMSE interference suppression and error correction coding at the first stage is shown by frame error rate simulations to provide significant performance improvement over the classical linear scheme. Finally, building on the "turbo principle", a low-complexity iterative interference cancellation and detection scheme is designed to provide a good compromise between the exponential computational complexity of the soft interference cancellation linear MMSE algorithm and the near-capacity performance of a scheme which uses iterative turbo processing for soft interference suppression in combination with multiuser detection.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Signal processing for future MIMO-OFDM wireless communication systems

The combination of multiple-input multiple-output (MIMO) technology and orthogonal frequency division multiplexing (OFDM) is likely to provide the air-interface solution for future broadband wireless systems. A major challenge for MIMO-OFDM systems is the problem of multi-access interference (MAI) induced by the presence of multiple users transmitting over the same bandwidth. Novel signal processing techniques are therefore required to mitigate MAI and thereby increase link performance. A background review of space-time block codes (STBCs) to lever age diversity gain in MIMO systems is provided together with an introduction to OFDM. The link performance of an OFDM system is also shown to be sensitive to time-variation of the channel. Iterative minimum mean square error (MMSE) receivers are therefore proposed to overcome such time-variation. In the context of synchronous uplink transmission, a new two-step hard-decision interference cancellation receiver for STBC MIMO-OFDM is shown to have robust performance and relatively low complexity. Further improvement is obtained through employing error control coding methods and iterative algorithms. A soft output multiuser detector based on MMSE interference suppression and error correction coding at the first stage is shown by frame error rate simulations to provide significant performance improvement over the classical linear scheme. Finally, building on the "turbo principle", a low-complexity iterative interference cancellation and detection scheme is designed to provide a good compromise between the exponential computational complexity of the soft interference cancellation linear MMSE algorithm and the near-capacity performance of a scheme which uses iterative turbo processing for soft interference suppression in combination with multiuser detection

Performance of MIMO Schemes in Radio-over-fibre-based Distributed Antenna System

The research presented in this thesis has focused on the use of MIMO wireless communications in a RoF-based DAS to improve wireless coverage and capacity performance in an indoor environment. The aim is to analyse the practical issues that cause throughput to deteriorate when commercial MIMO APs are used in a RoF-DAS, and also to verify that improved performance - lower error rates and higher capacities - can be achieved by a large physical separation between the RAUs when specific multi-antenna scheme algorithms are used. The performance of an IEEE 802.11n MIMO-supported AP and IEEE 802.11g spatial-diversity-supported AP are investigated in a RoF-DAS when different fibre lengths are connecting the AP in the central unit to the RAUs, and when the RAUs are widely separated. The analysis indicates that for MIMO, the throughput drops rapidly due to severe ISI caused by differential delay when the fibre-length difference exceeds a certain distance, while for spatial diversity high throughputs can be maintained even at large fibre-length difference. Further, it was observed that largely separated RAU may lead to power imbalances and the throughput drops in specific wireless user's positions when the received power imbalance was above 12-15dB for MIMO-supported AP, while for spatial-diversity-supported AP the power imbalance does not affect the throughput. The majority of previous works on RoF-DAS for improving MIMO systems were based on commercial products and the specific algorithms used within these products are unknown. An investigation was carried out at microwave frequency with SIMO algorithms in RoF-DAS uplink, MISO and MIMO algorithms in RoF-DAS downlink, and compared with the performance of a SISO system. This investigation was later extended to millimetre-wave frequency where larger bands of frequency are available enabling the possibility of wider bandwidth and higher data rates. The result shows significantly reduced error rate and modestly increased capacity for a wireless 1x2 SIMO uplink using MRC algorithm and 2x1 MISO downlink using Alamouti STBC algorithm. Also, error rate was reduced for a wireless 2x2 MIMO downlink using the zero-forcing algorithm while, most importantly, greatly increased capacity was achieved through the spatial multiplexing gain