CSMA/RN: A universal protocol for gigabit networks

Networks must provide intelligent access for nodes to share the communications resources. In the range of 100 Mbps to 1 Gbps, the demand access class of protocols were studied extensively. Many use some form of slot or reservation system and many the concept of attempt and defer to determine the presence or absence of incoming information. The random access class of protocols like shared channel systems (Ethernet), also use the concept of attempt and defer in the form of carrier sensing to alleviate the damaging effects of collisions. In CSMA/CD, the sensing of interference is on a global basis. All systems discussed above have one aspect in common, they examine activity on the network either locally or globally and react in an attempt and whatever mechanism. Of the attempt + mechanisms discussed, one is obviously missing; that is attempt and truncate. Attempt and truncate was studied in a ring configuration called the Carrier Sensed Multiple Access Ring Network (CSMA/RN). The system features of CSMA/RN are described including a discussion of the node operations for inserting and removing messages and for handling integrated traffic. The performance and operational features based on analytical and simulation studies which indicate that CSMA/RN is a useful and adaptable protocol over a wide range of network conditions are discussed. Finally, the research and development activities necessary to demonstrate and realize the potential of CSMA/RN as a universal, gigabit network protocol is outlined

Medium access control mechanisms for high speed metropolitan area networks

In this dissertation novel Medium Access Control mechanisms for High Speed Metropolitan Area networks are proposed and their performance is investigated under the presence of single and multiple priority classes of traffic. The proposed mechanisms are based on the Distributed Queue Dual Bus network, which has been adopted by the IEEE standardization committee as the 802.6 standard for Metropolitan Area Networks, and address most of its performance limitations. First, the Rotating Slot Generator scheme is introduced which uses the looped bus architecture that has been proposed for the 802.6 network. According to this scheme the responsibility for generating slots moves periodically from station to station around the loop. In this way, the positions of the stations relative to the slot generator change continuously, and therefore, there are no favorable locations on the busses. Then, two variations of a new bandwidth balancing mechanism, the NSW_BWB and ITU_NSW are introduced. Their main advantage is that their operation does not require the wastage of channel slots and for this reason they can converge very fast to the steady state, where the fair bandwidth allocation is achieved. Their performance and their ability to support multiple priority classes of traffic are thoroughly investigated. Analytic estimates for the stations\u27 throughputs and average segment delays are provided. Moreover, a novel, very effective priority mechanism is introduced which can guarantee almost immediate access for high priority traffic, regardless of the presence of lower priority traffic. Its performance is thoroughly investigated and its ability to support real time traffic, such as voice and video, is demonstrated. Finally, the performance under the presence of erasure nodes of the various mechanisms that have been proposed in this dissertation is examined and compared to the corresponding performance of the most prominent existing mechanisms

Extremely high data-rate, reliable network systems research

Significant progress was made over the year in the four focus areas of this research group: gigabit protocols, extensions of metropolitan protocols, parallel protocols, and distributed simulations. Two activities, a network management tool and the Carrier Sensed Multiple Access Collision Detection (CSMA/CD) protocol, have developed to the point that a patent is being applied for in the next year; a tool set for distributed simulation using the language SIMSCRIPT also has commercial potential and is to be further refined. The year's results for each of these areas are summarized and next year's activities are described

High speed protocols for dual bus and dual ring network architectures

In this dissertation, two channel access mechanisms providing fair and bandwidth efficient transmission on dual bus and dual ring networks with high bandwidth-latency product are proposed. In addition, two effective priority mechanisms are introduced to meet the throughput and delay requirements of the diverse arrays of applications that future high speed networks must support. For dual bus architectures, the Buffer Insertion Bandwidth Balancing (BI_BWB) mechanism and the Preemptive priority Bandwidth Balancing (P_BI_BWB) mechanism are proposed. BI_BWB can significantly improve the delay performance of remote stations. It achieves that by providing each station with a shift register into which the station can temporarily store the upstream stations\u27 transmitted packets and replace these packets with its own transmissions. P_BI_BWB, an enhancement of BI_BWB, is designed to introduce effective preemptive priorities. This mechanism eliminates the effect of low priority on high priority by buffering the low priority traffic into a shift register until the transmission of the high priority traffic is complete. For dual ring architectures, the Fair Bandwidth Allocation Mechanism (FBAM) and the Effective Priority Bandwidth Balancing (EP_BWB) mechanism are introduced. FBAM allows stations to reserve channel bandwidth on a continuous basis rather than wait until bandwidth starvation is observed. Consequently, FBAM does not have to deal with the difficult issue of identifying starvation, a serious drawback of other access mechanisms such as the Local and Global Fairness Algorithms (LFA and GFA, respectively). In addition, its operation requires a significantly smaller number of control bits in the access control field of the slot and its performance is less sensitive to system parameters. Moreover, FBAM demonstrates Max-Min flow control properties with respect to the allocation of bandwidth among competing traffic streams, which is a significant advantage of FBAM over all the previously proposed channel access mechanisms. EP_BWB, an enhancement of FBAM to support preemptive priorities, minimizes the effect of low priority on high priority and supports delay-sensitive traffic by enabling higher priority classes to preempt the transmissions of lower priority classes. Finally, the great potential of EP_BWB to support the interconnection of base stations on a distributed control wireless PCN carrying voice and data traffic is demonstrated

An efficient guaranteed bandwidth and balancing mechanism for high speed MANs

The Distributed Queue Dual Bus (DQDB) has become the IEEE 802.6 stan-dard for Metropolitan Area Networks (MANs). The main advantage of DQDB is that its throughput performance is not affected by the network parameters such as size, number of connected stations, or channel bandwidth. Its main drawback is that the location of the stations on the bus strongly affects their performance. For this reason a Bandwidth Balancing Mechanism (BBM_DQDB) has been proposed and included in the 802.6 standard that can provide the requested bandwidth by the lightly loaded stations and evenly distribute the remaining bandwidth among the overloaded stations. The guaranteed bandwidth required by some applications has also motivated the recent introduction of another mechanism, the Guaranteed Bandwidth (GBW_DQDB) mechanism, that can guarantee the required level of throughput to certain high priority stations. In this thesis we first discuss the main advantages and disadvantages of BBM_DQDB and GBW_DQDB and then we introduce a new mechanism, the Guaranteed Bandwidth and Balancing Mechanism (GBBM), that combines the advantages of the previous two mechanisms and can significantly improve the throughput and delay performance of the stations. We provide a detailed description of the new mechanism and we investigate its performance through simulation results. Furthermore, we compare its performance with the corresponding performance of BBM_DQDB and GBW_DQDB

Load-balanced optical switch for high-speed router design

A hybrid electro-optic router is attractive, where packet buffering and table lookup are carried out in electrical domain and switching is done optically. In this paper, we propose a loadbalanced optical switch (LBOS) fabric for a hybrid router. LBOS comprises N linecards connected by an N-wavelength WDM fiber ring. Each linecard i is configured to receive on channel λ i. To send a packet, it can select and transmit on an idle channel based on where the packet goes. The packet remains in the optical domain all the way from an input linecard/port to an output linecard/port. Meanwhile, the loading in the ring network is perfectly balanced by spreading the packets for different destinations to use different wavelengths, and packets for the same destination to use different time slots. With the pipelined operation of the LBOS, we show that LBOS is an optical counterpart of an efficient load-balanced electronic switch, and close-to-100% throughput can be obtained. To address the ringfairness problem under the inadmissible traffic patterns, an efficient throughput-fair scheduler for LBOS is also devised. ©2010 IEEE.published_or_final_versio

Performance Improvements for FDDI and CSMA/CD Protocols

The High-Performance Computing Initiative from the White House Office of Science and Technology Policy has defined 20 major challenges in science and engineering which are dependent on the solutions to a number of high-performance computing problems. One of the major areas of focus of this initiative is the development of gigabit rate networks to be used in environments such as the space station or a National Research and Educational Network (NREN). The strategy here is to use existing network designs as building blocks for achieving higher rates, with the ultimate goal being a gigabit rate network. Two strategies which contribute to achieving this goal are examined in detail.1 FDDI2 is a token ring network based on fiber optics capable of a 100 Mbps rate. Both media access (MAC) and physical layer modifications are considered. A method is presented which allows one to determine maximum utilization based on the token-holding timer settings. Simulation results show that employing the second counter-rotating ring in combination with destination removal has a multiplicative effect greater than the effect which either of the factors have individually on performance. Two 100 Mbps rings can handle loads in the range of 400 to 500 Mbps for traffic with a uniform distribution and fixed packet size. Performance is dependent on the number of nodes, improving as the number increases. A wide range of environments are examined to illustrate robustness, and a method of implementation is discussed

Performance Evaluation of a Modified Carrier Sense Multiple Access with Collision Detection Protocol

Using Carrier Sense Multiple Access with Collision Detection (CSMMCD), Ethernet Local Area Networks (LANs) suffers from capture effect in packet loss. As a result of capture effect, some nodes may be locked-out of using the medium for a period of time. Hence, CSMAICD based Ethernet is unsuitable for real-time multimedia traffic. It does not guarantee delay bound, behaves poorly under heavy load conditions. To overcome these shortcomings and enhance performance of CSMAKD based LAN, three new concepts are added to the conventional CSMMCD. Firstly, each node in the LAN has a finite buffer. A node competes for access to the medium after its buffer is full. It will transmit all packets in the buffer if access is permitted. To minimize the waiting delay of packets in the buffer prior to transmission, a time-out period is set, beyond which a node tries to transmit considering its buffer is full.Due to buffer, the number of nodes trying to transmit at a time is reduced, thereby collision rate is reduced. Capture effect, locked-out probability, bandwidth loss and backoff delays are also reduced. To support all types of traffic (mainly real-time traffic), the optimum buffer size obtained is 10 packetsibuffer. Using this buffer, multimedia traffic can be sent in a streamed fashion within a delay bound. Secondly, the maximum retransmission attempt limit and backoff limit are reduced to 10 and 8 times respectively to guarantee a tolerable delay for multimedia applications. A new special-jamming signal is introduced. It gives transmission priority to the node that already has finished its maximum retransmission attempt. This prevents packet loss and quality degradation of received normal data traffic and multimedia traffic. The final one is the priority scheduler, which is activated when multiple nodes send the special-jamming signal at a time. It gives permission to the node having either the lowest timestamp or the smallest source address (SA) to transmit while other nodes wait until their access is permitted accordingly. The proposed protocol is based on bus topology for a single channel LAN. Throughput, transmission efficiency, average delay and percentage of collision of the proposed network is evaluated against number of nodes, bus length and offered load within two environments, i.e. Fast Ethernet and Gigabit Ethernet. The results show significant performance improvement. Throughput, transmission efficiency are increased more than 10% in average. On the other hand, average delay and percentage of collision are reduced to less than 2 ms and 3.5% respectively compared to the conventional CSMA/CD based LAN

Delay analysis for wireless applications using a multiservice multiqueue processor sharing model

The ongoing development of wireless networks supporting multimedia applications requires service providers to efficiently deliver complex Quality of Service (QoS) requirements. The wide range of new applications in these networks significantly increases the difficulty of network design and dimensioning to meet QoS requirements. Medium Access Control (MAC) protocols affect QoS achieved by wireless networks. Research on analysis and performance evaluation is important for the efficient protocol design. As wireless networks feature scarce resources that are simultaneously shared by all users, processor sharing (PS) models were proposed for modelling resource sharing mechanisms in such systems. In this thesis, multi-priority MAC protocols are proposed for handling the various service traffic types. Then, an investigation of multiservice multiqueue PS models is undertaken to analyse the delay for some recently proposed wireless applications. We start with an introduction to MAC protocols for wireless networks which are specified in IEEE standards and then review scheduling algorithms which were proposed to work with the underlying MAC protocols to cooperatively achieve QoS goals. An overview of the relevant literature is given on PS models for performance analysis and evaluation of scheduling algorithms. We propose a multiservice multiqueue PS model using a scheduling scheme in multimedia wireless networks with a comprehensive description of the analytical solution. Firstly, we describe the existing multiqueue processor sharing (MPS) model, which uses a fixed service quantum at each queue, and correct a subtle incongruity in previous solutions presented in the literature. Secondly, a new scheduling framework is proposed to extend the previous MPS model to a general case. This newly proposed analytical approach is based on the idea that the service quantum arranged by a MAC scheduling controller to service data units can be priority-based. We obtain a closed-form expression for the mean delay of each service class in this model. In summary, our new approach simplifies MAC protocols for multimedia applications into an analytical model that includes more complex and realistic traffic models without compromising details of the protocol and significantly reduces the number of MAC headers, thus the overall average delay will be decreased. In response to using the studied multiservice multiqueue PS models, we apply the MPS model to two wireless applications: Push to Talk (PTT) service over GPRS/GSM networks and the Worldwide Interoperability for Microwave Access (WiMAX) networks. We investigate the uplink delay of PTT over traditional GPRS/GSM networks and the uplink delay for WiMAX Subscriber Station scheduler under a priority-based fair scheduling. MAC structures capable of supporting dynamically varying traffic are studied for the networks, especially, with the consideration of implementation issues. The model provides useful insights into the dynamic performance behaviours of GPRS/GSM and WiMAX networks with respect to various system parameters and comprehensive traffic conditions. We then evaluate the model under some different practical traffic scenarios. Through modelling of the operation of wireless access systems, under a variety of multimedia traffic, our analytical approaches provide practical analysis guidelines for wireless network dimensioning