Efficient Variable Length Block Switching Mechanism

Most popular and widely used packet switch architecture is the crossbar. Its attractive characteristics are simplicity, non-blocking and support for simultaneous multiple packet transmission across the switch. The special version of crossbar switch is Combined Input Crossbar Queue (CICQ) switch. It overcomes the limitations of un-buffered crossbar by employing buffers at each crosspoint in addition to buffering at each input port. Adoption of Crosspoint Buffer (CB) simplifies the scheduling complexity and adapts the distributed nature of scheduling. As a result, matching operation is not needed. Moreover, it supports variable length packets transmission without segmentation. Native switching of variable length packet transmission results in unfairness. To overcome this unfairness, Fixed Length Block Transfer mechanism has been proposed. It has the following drawbacks: (a) Fragmented packets are reassembled at the Crosspoint Buffer (CB). Hence, minimum buffer requirement at each crosspoint is twice the maximum size of the block. When number of ports are more, existence of such a switch is infeasible, due to the restricted memory available in switch core. (b) Reassembly circuit at each crosspoint adds the cost of the switch. (c) Packet is eligible to transfer from CB to output only when the entire packet arrives at the CB, which increases the latency of the fragmented packet in the switch. To overcome these drawbacks, this paper presents Variable Length Block Transfer mechanism. It does not require internal speedup, segmentation and reassembly circuits. Using simulation it is shown that proposed mechanism is superior to Fixed Length Block Transfer mechanism in terms of delay and throughput

Multistage Packet-Switching Fabrics for Data Center Networks

Recent applications have imposed stringent requirements within the Data Center Network (DCN) switches in terms of scalability, throughput and latency. In this thesis, the architectural design of the packet-switches is tackled in different ways to enable the expansion in both the number of connected endpoints and traffic volume. A cost-effective Clos-network switch with partially buffered units is proposed and two packet scheduling algorithms are described. The first algorithm adopts many simple and distributed arbiters, while the second approach relies on a central arbiter to guarantee an ordered packet delivery. For an improved scalability, the Clos switch is build using a Network-on-Chip (NoC) fabric instead of the common crossbar units. The Clos-UDN architecture made with Input-Queued (IQ) Uni-Directional NoC modules (UDNs) simplifies the input line cards and obviates the need for the costly Virtual Output Queues (VOQs). It also avoids the need for complex, and synchronized scheduling processes, and offers speedup, load balancing, and good path diversity. Under skewed traffic, a reliable micro load-balancing contributes to boosting the overall network performance. Taking advantage of the NoC paradigm, a wrapped-around multistage switch with fully interconnected Central Modules (CMs) is proposed. The architecture operates with a congestion-aware routing algorithm that proactively distributes the traffic load across the switching modules, and enhances the switch performance under critical packet arrivals. The implementation of small on-chip buffers has been made perfectly feasible using the current technology. This motivated the implementation of a large switching architecture with an Output-Queued (OQ) NoC fabric. The design merges assets of the output queuing, and NoCs to provide high throughput, and smooth latency variations. An approximate analytical model of the switch performance is also proposed. To further exploit the potential of the NoC fabrics and their modularity features, a high capacity Clos switch with Multi-Directional NoC (MDN) modules is presented. The Clos-MDN switching architecture exhibits a more compact layout than the Clos-UDN switch. It scales better and faster in port count and traffic load. Results achieved in this thesis demonstrate the high performance, expandability and programmability features of the proposed packet-switches which makes them promising candidates for the next-generation data center networking infrastructure

Multistage Packet-Switching Fabrics for Data Center Networks

Recent applications have imposed stringent requirements within the Data Center Network (DCN) switches in terms of scalability, throughput and latency. In this thesis, the architectural design of the packet-switches is tackled in different ways to enable the expansion in both the number of connected endpoints and traffic volume. A cost-effective Clos-network switch with partially buffered units is proposed and two packet scheduling algorithms are described. The first algorithm adopts many simple and distributed arbiters, while the second approach relies on a central arbiter to guarantee an ordered packet delivery. For an improved scalability, the Clos switch is build using a Network-on-Chip (NoC) fabric instead of the common crossbar units. The Clos-UDN architecture made with Input-Queued (IQ) Uni-Directional NoC modules (UDNs) simplifies the input line cards and obviates the need for the costly Virtual Output Queues (VOQs). It also avoids the need for complex, and synchronized scheduling processes, and offers speedup, load balancing, and good path diversity. Under skewed traffic, a reliable micro load-balancing contributes to boosting the overall network performance. Taking advantage of the NoC paradigm, a wrapped-around multistage switch with fully interconnected Central Modules (CMs) is proposed. The architecture operates with a congestion-aware routing algorithm that proactively distributes the traffic load across the switching modules, and enhances the switch performance under critical packet arrivals. The implementation of small on-chip buffers has been made perfectly feasible using the current technology. This motivated the implementation of a large switching architecture with an Output-Queued (OQ) NoC fabric. The design merges assets of the output queuing, and NoCs to provide high throughput, and smooth latency variations. An approximate analytical model of the switch performance is also proposed. To further exploit the potential of the NoC fabrics and their modularity features, a high capacity Clos switch with Multi-Directional NoC (MDN) modules is presented. The Clos-MDN switching architecture exhibits a more compact layout than the Clos-UDN switch. It scales better and faster in port count and traffic load. Results achieved in this thesis demonstrate the high performance, expandability and programmability features of the proposed packet-switches which makes them promising candidates for the next-generation data center networking infrastructure

Threshold-based Exhaustive Round-Robin for the CICQ Switch with Virtual Crosspoint Queues

Abstract-A multi-cabinet implementation of a combined input and crosspoint queued (CICQ) switch introduces a large RTT latency between the line cards and switch fabric, making the crosspoint (CP) buffer requirement impractical. A virtual crosspoint queues (VCQs), proposed in literature are shared among a set of VOQs and CP buffers for the same input port, reducing minimal memory required inside the switch fabric. In this paper, a threshold-based exhaustive round-robin (T-ERR) is employed to improve the throughput of the CICQ switch with VCQs. T-ERR at VCQ and CP arbiters serve packets residing in a longer queue more aggressively than packet residing in a shorter queue. T-ERR is simple yet drastically increases throughput for the CICQ with small VCQ size. Simulation experiment with unbalanced traffic show that its throughput improves from 80 % to 94 % for CP size of 4 cells and 73 % to 83 % for CP size of 2 cells for RTT = 64 cell time. Furthermore, its throughput is independent of switch size and RTT. Thus, the proposed scheme makes the scalable implementation of a distributed CICQ switch practical. Index Terms – CICQ switches, flow control, scalability, and virtual crosspoint queues I

Efficient Q. S support for higt-performance interconnects

Las redes de interconexión son un componente clave en un gran número de sistemas. Los mecanismos de calidad de servicio (qos) son responsables de asegurar que se alcanza un cierto rendimiento en la red. Las soluciones tradicionales para ofrecer qos en redes de interconexión de altas prestaciones normalmente se basan en arquitecturas complejas. El principal objetivo de esta tesis es investigar si podemos ofrecer mecanismos eficientes de qos. Nuestro propósito es alcanzar un soporte completo de qos con el mínimo de recursos. Para ello, se identifican redundancias en los mecanismos propuestos de qos y son eliminados sin afectar al rendimiento. Esta tesis consta de tres partes. En la primera comenzamos con las propuestas tradicionales de qos a nivel de clase de tráfico. En la segunda parte, proponemos como adaptar los mecanismos de qos basados en deadlines para redes de interconexión de altas prestaciones. Por último, también investigamos la interacción de los mecanismos de qos con el control de congestión

Floorplan-Aware High Performance NoC Design

Las actuales arquitecturas de m�ltiples n�cleos como los chip multiprocesadores (CMP) y soluciones multiprocesador para sistemas dentro del chip (MPSoCs) han adoptado a las redes dentro del chip (NoC) como elemento -ptimo para la inter-conexi-n de los diversos elementos de dichos sistemas. En este sentido, fabricantes de CMPs y MPSoCs han adoptado NoCs sencillas, generalmente con una topolog'a en malla o anillo, ya que son suficientes para satisfacer las necesidades de los sistemas actuales. Sin embargo a medida que los requerimientos del sistema -- baja latencia y alto rendimiento -- se hacen m�s exigentes, estas redes tan simples dejan de ser una soluci-n real. As', la comunidad investigadora ha propuesto y analizado NoCs m�s complejas. No obstante, estas soluciones son m�s dif'ciles de implementar -- especialmente los enlaces largos -- haciendo que este tipo de topolog'as complejas sean demasiado costosas o incluso inviables. En esta tesis, presentamos una metodolog'a de dise-o que minimiza la p�rdida de prestaciones de la red debido a su implementaci-n real. Los principales problemas que se encuentran al implementar una NoC son los conmutadores y los enlaces largos. En esta tesis, el conmutador se ha hecho modular, es decir, formado como uni-n de m-dulos m�s peque-os. En nuestro caso, los m-dulos son id�nticos, donde cada m-dulo es capaz de arbitrar, conmutar, y almacenar los mensajes que le llegan. Posteriormente, flexibilizamos la colocaci-n de estos m-dulos en el chip, permitiendo que m-dulos de un mismo conmutador est�n distribuidos por el chip. Esta metodolog'a de dise-o la hemos aplicado a diferentes escenarios. Primeramente, hemos introducido nuestro conmutador modular en NoCs con topolog'as conocidas como la malla 2D. Los resultados muestran como la modularidad y la distribuci-n del conmutador reducen la latencia y el consumo de potencia de la red. En segundo lugar, hemos utilizado nuestra metodolog'a de dise-o para implementar un crossbar distribuidRoca Pérez, A. (2012). Floorplan-Aware High Performance NoC Design [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/17844Palanci