Target-directed navigation using wireless sensor networks and implicit surface interpolation

pre-printAbstract-This paper extends the novel research for event localization and target-directed navigation using a deployed wireless sensor network (WSN) [4]. The goal is to have an autonomous mobile robot (AMR) navigate to a target-location by: (i) producing an artificial magnitude distribution within the WSN-covered region, and (ii) having the AMR use the pseudo-gradient from the interpolated distribution in its neighborhood, as it moves towards the target location. Implicit surfaces are used to interpolate the artificial distribution. This scheme only uses the topology of the WSN and received signal strength (RSS) to estimate an efficient navigation path for the AMR. Here, the AMR does not require global coordinates for the region, as it relies on local, neighborhood information alone to navigate. The performance of the scheme is analyzed with hardware experiments and in simulation, using a variety of node-densities and with increasing levels of noise to ensure robustness. Index Terms-Target-directed navigation, pseudo-gradient, spline-interpolated distribution, received signal strength

Received signal strength based bearing-only robot navigation in a sensor network field

pre-printThis paper presents a low-complexity, novel approach to wireless sensor network (WSN) assisted autonomous mobile robot (AMR) navigation. The goal is to have an AMR navigate to a target location using only the information inherent to WSNs, i.e., topology of the WSN and received signal strength (RSS) information, while executing an efficient navigation path. Here, the AMR has neither the location information for the WSN, nor any sophisticated ranging equipment for prior mapping. Two schemes are proposed utilizing particle filtering based bearing estimation with RSS values obtained from directional antennas. Real-world experiments demonstrate the effectiveness of the proposed schemes. In the basic node-to-node navigation scheme, the bearing-only particle filtering reduces trajectory length by 11.7% (indoors) and 15% (outdoors), when compared to using raw bearing measurements. The advanced scheme further reduces the trajectory length by 22.8% (indoors) and 19.8% (outdoors), as compared to the basic scheme. The mechanisms exploit the low-cost, low-complexity advantages of the WSNs to provide an effective method for map-less and ranging-less navigation

Viewfinder: final activity report

The VIEW-FINDER project (2006-2009) is an 'Advanced Robotics' project that seeks to apply a semi-autonomous robotic system to inspect ground safety in the event of a fire. Its primary aim is to gather data (visual and chemical) in order to assist rescue personnel. A base station combines the gathered information with information retrieved from off-site sources. The project addresses key issues related to map building and reconstruction, interfacing local command information with external sources, human-robot interfaces and semi-autonomous robot navigation. The VIEW-FINDER system is a semi-autonomous; the individual robot-sensors operate autonomously within the limits of the task assigned to them, that is, they will autonomously navigate through and inspect an area. Human operators monitor their operations and send high level task requests as well as low level commands through the interface to any nodes in the entire system. The human interface has to ensure the human supervisor and human interveners are provided a reduced but good and relevant overview of the ground and the robots and human rescue workers therein

Advancing Urban Flood Resilience With Smart Water Infrastructure

Advances in wireless communications and low-power electronics are enabling a new generation of smart water systems that will employ real-time sensing and control to solve our most pressing water challenges. In a future characterized by these systems, networks of sensors will detect and communicate flood events at the neighborhood scale to improve disaster response. Meanwhile, wirelessly-controlled valves and pumps will coordinate reservoir releases to halt combined sewer overflows and restore water quality in urban streams. While these technologies promise to transform the field of water resources engineering, considerable knowledge gaps remain with regards to how smart water systems should be designed and operated. This dissertation presents foundational work towards building the smart water systems of the future, with a particular focus on applications to urban flooding. First, I introduce a first-of-its-kind embedded platform for real-time sensing and control of stormwater systems that will enable emergency managers to detect and respond to urban flood events in real-time. Next, I introduce new methods for hydrologic data assimilation that will enable real-time geolocation of floods and water quality hazards. Finally, I present theoretical contributions to the problem of controller placement in hydraulic networks that will help guide the design of future decentralized flood control systems. Taken together, these contributions pave the way for adaptive stormwater infrastructure that will mitigate the impacts of urban flooding through real-time response.PHDCivil EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/163144/1/mdbartos_1.pd

Autonomous Flight, Fault, and Energy Management of the Flying Fish Solar-Powered Seaplane.

The Flying Fish autonomous unmanned seaplane is designed and built for persistent ocean surveillance. Solar energy harvesting and always-on autonomous control and guidance are required to achieve unattended long-term operation. This thesis describes the Flying Fish avionics and software systems that enable the system to plan, self-initiate, and autonomously execute drift-flight cycles necessary to maintain a designated watch circle subject to environmentally influenced drift. We first present the avionics and flight software architecture developed for the unique challenges of an autonomous energy-harvesting seaplane requiring the system to be: waterproof, robust over a variety of sea states, and lightweight for flight. Seaplane kinematics and dynamics are developed based on conventional aircraft and watercraft and upon empirical flight test data. These models serve as the basis for development of flight control and guidance strategies which take the form of a cyclic multi-mode guidance protocol that smoothly transitions between nested gain-scheduled proportional-derivative feedback control laws tuned for the trim conditions of each flight mode. A fault-tolerant airspeed sensing system is developed in response to elevated failure rates arising from pitot probe water ingestion in the test environment. The fault-tolerance strategy utilizes sensor characteristics and signal energy to combine redundant sensor measurements in a weighted voting strategy, handling repeated failures, sensor recovery, non-homogenous sensors, and periods of complete sensing failure. Finally, a graph-based mission planner combines models of global solar energy, local ocean-currents, and wind with flight-verified/derived aircraft models to provide an energy-aware flight planning tool. An NP-hard asymmetric multi-visit traveling salesman planning problem is posed that integrates vehicle performance and environment models using energy as the primary cost metric. A novel A* search heuristic is presented to improve search efficiency relative to uniform cost search. A series of cases studies are conducted with surface and airborne goals for various times of day and for multi-day scenarios. Energy-optimal solutions are identified except in cases where energy harvesting produces multiple comparable-cost plans via negative-cost cycles. The always-on cyclic guidance/control system, airspeed sensor fault management algorithm, and the nested-TSP heuristic for A* are all critical innovation required to solve the posed research challenges.Ph.D.Aerospace EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91453/1/eubankrd_1.pd

Sensors and Systems for Indoor Positioning

This reprint is a reprint of the articles that appeared in Sensors' (MDPI) Special Issue on “Sensors and Systems for Indoor Positioning". The published original contributions focused on systems and technologies to enable indoor applications

Optimal UAS Assignments and Trajectories for Persistent Surveillance and Data Collection from a Wireless Sensor Network

This research developed a method for multiple Unmanned Aircraft Systems (UAS) to efficiently collect data from a Wireless Sensor Networks (WSN). WSN are composed of any number of fixed, ground-based sensors that collect and upload local environmental data to over flying UAS. The three-step method first uniquely assigns aircraft to specific sensors on the ground. Second, an efficient flight path is calculated to minimize the aircraft flight time required to verify their assigned sensors. Finally, sensors reporting relatively higher rates of local environmental activity are re-assigned to dedicated aircraft tasked with concentrating on only those sensors. This work was sponsored by the Air Force Research Laboratory, Control Sciences branch, at Wright Patterson AFB. Based on simulated scenarios and preliminary flight tests, optimal flight paths resulted in a 14 to 32 reduction in flight time and distance when compared to traditional flight planning methods

Aerial Vehicles

This book contains 35 chapters written by experts in developing techniques for making aerial vehicles more intelligent, more reliable, more flexible in use, and safer in operation.It will also serve as an inspiration for further improvement of the design and application of aeral vehicles. The advanced techniques and research described here may also be applicable to other high-tech areas such as robotics, avionics, vetronics, and space

Digital Technologies for Transport and Mobility: Challenges, Trends and Perspectives

This white paper aims at presenting the ideas emerging from the different fields pertaining to transport and mobility, to describe the capacities of current state-of-the-art digital technologies and the perspectives that are expected to shape the future of transport and mobility