Human factors in space telepresence

The problems of interfacing a human with a teleoperation system, for work in space are discussed. Much of the information presented here is the result of experience gained by the M.I.T. Space Systems Laboratory during the past two years of work on the ARAMIS (Automation, Robotics, and Machine Intelligence Systems) project. Many factors impact the design of the man-machine interface for a teleoperator. The effects of each are described in turn. An annotated bibliography gives the key references that were used. No conclusions are presented as a best design, since much depends on the particular application desired, and the relevant technology is swiftly changing

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 13th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2022, held in Hamburg, Germany, in May 2022. The 36 regular papers included in this book were carefully reviewed and selected from 129 submissions. They were organized in topical sections as follows: haptic science; haptic technology; and haptic applications

Proceedings of the NASA Conference on Space Telerobotics, volume 3

The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility

Fine-grained Haptics: Sensing and Actuating Haptic Primary Colours (force, vibration, and temperature)

This thesis discusses the development of a multimodal, fine-grained visual-haptic system for teleoperation and robotic applications. This system is primarily composed of two complementary components: an input device known as the HaptiTemp sensor (combines “Haptics” and “Temperature”), which is a novel thermosensitive GelSight-like sensor, and an output device, an untethered multimodal finegrained haptic glove. The HaptiTemp sensor is a visuotactile sensor that can sense haptic primary colours known as force, vibration, and temperature. It has novel switchable UV markers that can be made visible using UV LEDs. The switchable markers feature is a real novelty of the HaptiTemp because it can be used in the analysis of tactile information from gel deformation without impairing the ability to classify or recognise images. The use of switchable markers in the HaptiTemp sensor is the solution to the trade-off between marker density and capturing high-resolution images using one sensor. The HaptiTemp sensor can measure vibrations by counting the number of blobs or pulses detected per unit time using a blob detection algorithm. For the first time, temperature detection was incorporated into a GelSight-like sensor, making the HaptiTemp sensor a haptic primary colours sensor. The HaptiTemp sensor can also do rapid temperature sensing with a 643 ms response time for the 31°C to 50°C temperature range. This fast temperature response of the HaptiTemp sensor is comparable to the withdrawal reflex response in humans. This is the first time a sensor can trigger a sensory impulse that can mimic a human reflex in the robotic community. The HaptiTemp sensor can also do simultaneous temperature sensing and image classification using a machine vision camera—the OpenMV Cam H7 Plus. This capability of simultaneous sensing and image classification has not been reported or demonstrated by any tactile sensor. The HaptiTemp sensor can be used in teleoperation because it can communicate or transmit tactile analysis and image classification results using wireless communication. The HaptiTemp sensor is the closest thing to the human skin in tactile sensing, tactile pattern recognition, and rapid temperature response. In order to feel what the HaptiTemp sensor is touching from a distance, a corresponding output device, an untethered multimodal haptic hand wearable, is developed to actuate the haptic primary colours sensed by the HaptiTemp sensor. This wearable can communicate wirelessly and has fine-grained cutaneous feedback to feel the edges or surfaces of the tactile images captured by the HaptiTemp sensor. This untethered multimodal haptic hand wearable has gradient kinesthetic force feedback that can restrict finger movements based on the force estimated by the HaptiTemp sensor. A retractable string from an ID badge holder equipped with miniservos that control the stiffness of the wire is attached to each fingertip to restrict finger movements. Vibrations detected by the HaptiTemp sensor can be actuated by the tapping motion of the tactile pins or by a buzzing minivibration motor. There is also a tiny annular Peltier device, or ThermoElectric Generator (TEG), with a mini-vibration motor, forming thermo-vibro feedback in the palm area that can be activated by a ‘hot’ or ‘cold’ signal from the HaptiTemp sensor. The haptic primary colours can also be embedded in a VR environment that can be actuated by the multimodal hand wearable. A VR application was developed to demonstrate rapid tactile actuation of edges, allowing the user to feel the contours of virtual objects. Collision detection scripts were embedded to activate the corresponding actuator in the multimodal haptic hand wearable whenever the tactile matrix simulator or hand avatar in VR collides with a virtual object. The TEG also gets warm or cold depending on the virtual object the participant has touched. Tests were conducted to explore virtual objects in 2D and 3D environments using Leap Motion control and a VR headset (Oculus Quest 2). Moreover, a fine-grained cutaneous feedback was developed to feel the edges or surfaces of a tactile image, such as the tactile images captured by the HaptiTemp sensor, or actuate tactile patterns in 2D or 3D virtual objects. The prototype is like an exoskeleton glove with 16 tactile actuators (tactors) on each fingertip, 80 tactile pins in total, made from commercially available P20 Braille cells. Each tactor can be controlled individually to enable the user to feel the edges or surfaces of images, such as the high-resolution tactile images captured by the HaptiTemp sensor. This hand wearable can be used to enhance the immersive experience in a virtual reality environment. The tactors can be actuated in a tapping manner, creating a distinct form of vibration feedback as compared to the buzzing vibration produced by a mini-vibration motor. The tactile pin height can also be varied, creating a gradient of pressure on the fingertip. Finally, the integration of the high-resolution HaptiTemp sensor, and the untethered multimodal, fine-grained haptic hand wearable is presented, forming a visuotactile system for sensing and actuating haptic primary colours. Force, vibration, and temperature sensing tests with corresponding force, vibration, and temperature actuating tests have demonstrated a unified visual-haptic system. Aside from sensing and actuating haptic primary colours, touching the edges or surfaces of the tactile images captured by the HaptiTemp sensor was carried out using the fine-grained cutaneous feedback of the haptic hand wearable

Design of a Haptic Interface for Medical Applications using Magneto-Rheological Fluid based Actuators

This thesis reports on the design, construction, and evaluation of a prototype two degrees-of-freedom (DOF) haptic interface, which takes advantage of Magneto-Rheological Fluid (MRF) based clutches for actuation. Haptic information provides important cues in teleoperated systems and enables the user to feel the interaction with a remote or virtual environment during teleoperation. The two main objectives in designing a haptic interface are stability and transparency. Indeed, deficiencies in these factors in haptics-enabled telerobotic systems has the introduction of haptics in medical environments where safety and reliability are prime considerations. An actuator with poor dynamics, high inertia, large size, and heavy weight can significantly undermine the stability and transparency of a teleoperated system. In this work, the potential benefits of MRF-based actuators to the field of haptics in medical applications are studied. Devices developed with such fluids are known to possess superior mechanical characteristics over conventional servo systems. These characteristics significantly contribute to improved stability and transparency of haptic devices. This idea is evaluated and verified through both theoretical and experimental points of view. The design of a small-scale MRF-based clutch, suitable for a multi-DOF haptic interface, is discussed and its performance is compared with conventional servo systems. This design is developed into four prototype clutches. In addition, a closed-loop torque control strategy is presented. The feedback signal used in this control scheme comes from the magnetic field acquired from embedded Hall sensors in the clutch. The controller uses this feedback signal to compensate for the nonlinear behavior using an estimated model, based on Artificial Neural Networks. Such a control strategy eliminates the need for torque sensors for providing feedback signals. The performance of the developed design and the effectiveness of the proposed modeling and control techniques are experimentally validated. Next, a 2-DOF haptic interface based on a distributed antagonistic configuration of MRF-based clutches is constructed for a class of medical applications. This device is incorporated in a master-slave teleoperation setup that is used for applications involving needle insertion and soft-tissue palpation. Phantom and in vitro animal tissue were used to assess the performance of the haptic interface. The results show a great potential of MRF-based actuators for integration in haptic devices for medical interventions that require reliable, safe, accurate, highly transparent, and stable force reflection

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility