2,032 research outputs found
Parallel processing for scientific computations
The main contribution of the effort in the last two years is the introduction of the MOPPS system. After doing extensive literature search, we introduced the system which is described next. MOPPS employs a new solution to the problem of managing programs which solve scientific and engineering applications on a distributed processing environment. Autonomous computers cooperate efficiently in solving large scientific problems with this solution. MOPPS has the advantage of not assuming the presence of any particular network topology or configuration, computer architecture, or operating system. It imposes little overhead on network and processor resources while efficiently managing programs concurrently. The core of MOPPS is an intelligent program manager that builds a knowledge base of the execution performance of the parallel programs it is managing under various conditions. The manager applies this knowledge to improve the performance of future runs. The program manager learns from experience
A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks
In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs
Living Innovation Laboratory Model Design and Implementation
Living Innovation Laboratory (LIL) is an open and recyclable way for
multidisciplinary researchers to remote control resources and co-develop user
centered projects. In the past few years, there were several papers about LIL
published and trying to discuss and define the model and architecture of LIL.
People all acknowledge about the three characteristics of LIL: user centered,
co-creation, and context aware, which make it distinguished from test platform
and other innovation approaches. Its existing model consists of five phases:
initialization, preparation, formation, development, and evaluation.
Goal Net is a goal-oriented methodology to formularize a progress. In this
thesis, Goal Net is adopted to subtract a detailed and systemic methodology for
LIL. LIL Goal Net Model breaks the five phases of LIL into more detailed steps.
Big data, crowd sourcing, crowd funding and crowd testing take place in
suitable steps to realize UUI, MCC and PCA throughout the innovation process in
LIL 2.0. It would become a guideline for any company or organization to develop
a project in the form of an LIL 2.0 project.
To prove the feasibility of LIL Goal Net Model, it was applied to two real
cases. One project is a Kinect game and the other one is an Internet product.
They were both transformed to LIL 2.0 successfully, based on LIL goal net based
methodology. The two projects were evaluated by phenomenography, which was a
qualitative research method to study human experiences and their relations in
hope of finding the better way to improve human experiences. Through
phenomenographic study, the positive evaluation results showed that the new
generation of LIL had more advantages in terms of effectiveness and efficiency.Comment: This is a book draf
A Class of Parallel Tiled Linear Algebra Algorithms for Multicore Architectures
As multicore systems continue to gain ground in the High Performance
Computing world, linear algebra algorithms have to be reformulated or new
algorithms have to be developed in order to take advantage of the architectural
features on these new processors. Fine grain parallelism becomes a major
requirement and introduces the necessity of loose synchronization in the
parallel execution of an operation. This paper presents an algorithm for the
Cholesky, LU and QR factorization where the operations can be represented as a
sequence of small tasks that operate on square blocks of data. These tasks can
be dynamically scheduled for execution based on the dependencies among them and
on the availability of computational resources. This may result in an out of
order execution of the tasks which will completely hide the presence of
intrinsically sequential tasks in the factorization. Performance comparisons
are presented with the LAPACK algorithms where parallelism can only be
exploited at the level of the BLAS operations and vendor implementations
Transceiver architectures and sub-mW fast frequency-hopping synthesizers for ultra-low power WSNs
Wireless sensor networks (WSN) have the potential to become the third wireless revolution after wireless voice networks in the 80s and wireless data networks in the late 90s. This revolution will finally connect together the physical world of the human and the virtual world of the electronic devices. Though in the recent years large progress in power consumption reduction has been made in the wireless arena in order to increase the battery life, this is still not enough to achieve a wide adoption of this technology. Indeed, while nowadays consumers are used to charge batteries in laptops, mobile phones and other high-tech products, this operation becomes infeasible when scaled up to large industrial, enterprise or home networks composed of thousands of wireless nodes. Wireless sensor networks come as a new way to connect electronic equipments reducing, in this way, the costs associated with the installation and maintenance of large wired networks. To accomplish this task, it is necessary to reduce the energy consumption of the wireless node to a point where energy harvesting becomes feasible and the node energy autonomy exceeds the life time of the wireless node itself. This thesis focuses on the radio design, which is the backbone of any wireless node. A common approach to radio design for WSNs is to start from a very simple radio (like an RFID) adding more functionalities up to the point in which the power budget is reached. In this way, the robustness of the wireless link is traded off for power reducing the range of applications that can draw benefit form a WSN. In this thesis, we propose a novel approach to the radio design for WSNs. We started from a proven architecture like Bluetooth, and progressively we removed all the functionalities that are not required for WSNs. The robustness of the wireless link is guaranteed by using a fast frequency hopping spread spectrum technique while the power budget is achieved by optimizing the radio architecture and the frequency hopping synthesizer Two different radio architectures and a novel fast frequency hopping synthesizer are proposed that cover the large space of applications for WSNs. The two architectures make use of the peculiarities of each scenario and, together with a novel fast frequency hopping synthesizer, proved that spread spectrum techniques can be used also in severely power constrained scenarios like WSNs. This solution opens a new window toward a radio design, which ultimately trades off flexibility, rather than robustness, for power consumption. In this way, we broadened the range of applications for WSNs to areas in which security and reliability of the communication link are mandatory
Active Topology Inference using Network Coding
Our goal is to infer the topology of a network when (i) we can send probes
between sources and receivers at the edge of the network and (ii) intermediate
nodes can perform simple network coding operations, i.e., additions. Our key
intuition is that network coding introduces topology-dependent correlation in
the observations at the receivers, which can be exploited to infer the
topology. For undirected tree topologies, we design hierarchical clustering
algorithms, building on our prior work. For directed acyclic graphs (DAGs),
first we decompose the topology into a number of two-source, two-receiver
(2-by-2) subnetwork components and then we merge these components to
reconstruct the topology. Our approach for DAGs builds on prior work on
tomography, and improves upon it by employing network coding to accurately
distinguish among all different 2-by-2 components. We evaluate our algorithms
through simulation of a number of realistic topologies and compare them to
active tomographic techniques without network coding. We also make connections
between our approach and alternatives, including passive inference, traceroute,
and packet marking
- …