Surface-Enhanced Raman Scattering Sensor on an Optical Fiber Probe Fabricated with a Femtosecond Laser

A novel fabrication method for surface-enhanced Raman scattering (SERS) sensors that used a fast femtosecond (fs) laser scanning process to etch uniform patterns and structures on the endface of a fused silica optical fiber, which is then coated with a thin layer of silver through thermal evaporation is presented. A high quality SERS signal was detected on the patterned surface using a Rhodamine 6G (Rh6G) solution. The uniform SERS sensor built on the tip of the optical fiber tip was small, light weight, and could be especially useful in remote sensing applications

Femtosecond Laser Micromachining of Advanced Fiber Optic Sensors and Devices

Research and development in photonic micro/nano structures functioned as sensors and devices have experienced significant growth in recent years, fueled by their broad applications in the fields of physical, chemical and biological quantities. Compared with conventional sensors with bulky assemblies, recent process in femtosecond (fs) laser three-dimensional (3D) micro- and even nano-scale micromachining technique has been proven an effective and flexible way for one-step fabrication of assembly-free micro devices and structures in various transparent materials, such as fused silica and single crystal sapphire materials. When used for fabrication, fs laser has many unique characteristics, such as negligible cracks, minimal heat-affected-zone, low recast, high precision, and the capability of embedded 3D fabrication, compared with conventional long pulse lasers. The merits of this advanced manufacturing technique enable the unique opportunity to fabricate integrated sensors with improved robustness, enriched functionality, enhanced intelligence, and unprecedented performance. Recently, fiber optic sensors have been widely used for energy, defense, environmental, biomedical and industry sensing applications. In addition to the well-known advantages of miniaturized in size, high sensitivity, simple to fabricate, immunity to electromagnetic interference (EMI) and resistance to corrosion, all-optical fiber sensors are becoming more and more desirable when designed with characteristics of assembly free and operation in the reflection configuration. In particular, all-optical fiber sensor is a good candidate to address the monitoring needs within extreme environment conditions, such as high temperature, high pressure, toxic/corrosive/erosive atmosphere, and large strain/stress. In addition, assembly-free, advanced fiber optic sensors and devices are also needed in optofluidic systems for chemical/biomedical sensing applications and polarization manipulation in optical systems. Different fs laser micromachining techniques were investigated for different purposes, such as fs laser direct ablating, fs laser irradiation with chemical etching (FLICE) and laser induced stresses. A series of high performance assembly-free, all-optical fiber sensor probes operated in a reflection configuration were proposed and fabricated. Meanwhile, several significant sensing measurements (e.g., high temperature, high pressure, refractive index variation, and molecule identification) of the proposed sensors were demonstrated in this dissertation as well. In addition to the probe based fiber optic sensors, stress induced birefringence was also created in the commercial optical fibers using fs laser induced stresses technique, resulting in several advanced polarization dependent devices, including a fiber inline quarter waveplate and a fiber inline polarizer based on the long period fiber grating (LPFG) structure

3-D Multifunctional Sensors Fabricated on Fiber Tips Using a Two-Photon Polymerization Process

This thesis conducts research involving designing, fabricating, and testing optical fiber tip refractive index sensors. The fabrication process used for these sensors is a two-photon polymerization process utilizing a photo sensitive polymer. Unlike planar lithography, this fabrication process allows the creation of arbitrary shapes with a great degree of freedom. Three different fiber tip sensors were fabricated and tested. The first is a flat surfaced single cavity Fabry-Pérot interferometer (FPI) device, the second is a flat surfaced double cavity FPI device, and the final is a confocal surfaced double cavity FPI device. These sensors are tested for thermal radiation and volatile organic compounds (VOC) sensing. Thermal radiation sensing involves exposing the fiber tip device to temperatures ranging from room temperature up to 120oC. As the temperature increases, the fiber tip structure expands which changes its reflection spectrum. For VOC sensing each device was also exposed to isopropanol in gaseous form which results in a refractive index change. This change is also observed in the reflection spectrum. Lastly, research was conducted on thin dielectric reflective coatings for the purpose of increasing the reflectivity of the device surfaces resulting in a higher quality factor

Surface-Enhanced Raman Scattering Sensor on an Optical Fiber Probe Fabricated with a Femtosecond Laser

A novel fabrication method for surface-enhanced Raman scattering (SERS) sensors that used a fast femtosecond (fs) laser scanning process to etch uniform patterns and structures on the endface of a fused silica optical fiber, which is then coated with a thin layer of silver through thermal evaporation is presented. A high quality SERS signal was detected on the patterned surface using a Rhodamine 6G (Rh6G) solution. The uniform SERS sensor built on the tip of the optical fiber tip was small, light weight, and could be especially useful in remote sensing applications

Nanostructures métalliques et effets de composition des verres silicatés pour les capteurs à fibres optiques

The purpose of this thesis is to study composition variations of silicate glasses or the integration of metallic nanostructures that may be relevant for distributed fiber optic sensors (FOS). These sensors use optical fiber cores mainly composed of silica (SiO2) to probe temperature or strain on multi-kilometer route fibers. To measure these effects, Raman and Brillouin backscattering in optical fibers are used, Raman scattering being sensitive to temperature variations and Brillouin scattering to temperature and strain variations. Raman scattering intensity may be enhanced in conjunction with noble metal nanostructures via the SERS effect (Surface Enhanced Raman Scattering) which involves surface plasmon resonance (SPR), a collective oscillation of free electrons at the metal surface generating a large amplification of the local electric field. The integration of metallic nanostructures in optical fibers could increase Raman backscattering intensity and improve FOS performance (sensitivity, integration time…). A study on model samples has been performed with SERS substrates consisting of gold nanostructures and coated with a sol-gel oxide deposition (TiO2, SiO2). The obtained SERS results are used to predict the contribution of metallic nanostructures in Raman distributed temperature FOSL'objectif de cette thèse est d'étudier des variations de composition de verres ou l'intégration de nanostructures métalliques pouvant présenter un intérêt pour les capteurs à fibres optiques répartis (CFO). Ces capteurs utilisent le coeur des fibres optiques constitué majoritairement de silice (SiO2) pour sonder la température ou les déformations sur des parcours plurikilométriques de fibres. A cette fin, les rétrodiffusions Raman et Brillouin dans les fibres optiques sont utilisées, la diffusion Raman étant sensible aux variations de température et la diffusion Brillouin aux variations de température et de déformation. L'intensité de diffusion Raman peut-être exaltée au contact de nanostructures de métaux nobles, par l'intermédiaire de l'effet SERS (Diffusion Raman Exaltée de Surface) faisant intervenir notamment la résonance plasmon de surface (SPR), oscillation collective des électrons libres à la surface métallique générant une large amplification du champ électrique local. L'intégration de nanostructures métalliques dans les fibres optiques pourrait permettre d'augmenter l'intensité de rétrodiffusion Raman et améliorer les performances des CFO (sensibilité, temps d'intégration…). Une étude sur des échantillons modèles, constitués de substrats SERS nanostructurés d'or et recouvert de silice par dépôt sol-gel, est présentée dans ce manuscrit. Les résultats SERS ainsi obtenus permettent de caractériser le phénomène physique du SERS de SiO2 et de prédire sa potentielle utilité dans les CFO Rama