440 research outputs found

    In-wheel motor vibration control for distributed-driven electric vehicles:A review

    Get PDF
    Efficient, safe, and comfortable electric vehicles (EVs) are essential for the creation of a sustainable transport system. Distributed-driven EVs, which often use in-wheel motors (IWMs), have many benefits with respect to size (compactness), controllability, and efficiency. However, the vibration of IWMs is a particularly important factor for both passengers and drivers, and it is therefore crucial for a successful commercialization of distributed-driven EVs. This paper provides a comprehensive literature review and state-of-the-art vibration-source-analysis and -mitigation methods in IWMs. First, selection criteria are given for IWMs, and a multidimensional comparison for several motor types is provided. The IWM vibration sources are then divided into internally-, and externally-induced vibration sources and discussed in detail. Next, vibration reduction methods, which include motor-structure optimization, motor controller, and additional control-components, are reviewed. Emerging research trends and an outlook for future improvement aims are summarized at the end of the paper. This paper can provide useful information for researchers, who are interested in the application and vibration mitigation of IWMs or similar topics

    Critical Aspects of Electric Motor Drive Controllers and Mitigation of Torque Ripple - Review

    Get PDF
    Electric vehicles (EVs) are playing a vital role in sustainable transportation. It is estimated that by 2030, Battery EVs will become mainstream for passenger car transportation. Even though EVs are gaining interest in sustainable transportation, the future of EV power transmission is facing vital concerns and open research challenges. Considering the case of torque ripple mitigation and improved reliability control techniques in motors, many motor drive control algorithms fail to provide efficient control. To efficiently address this issue, control techniques such as Field Orientation Control (FOC), Direct Torque Control (DTC), Model Predictive Control (MPC), Sliding Mode Control (SMC), and Intelligent Control (IC) techniques are used in the motor drive control algorithms. This literature survey exclusively compares the various advanced control techniques for conventionally used EV motors such as Permanent Magnet Synchronous Motor (PMSM), Brushless Direct Current Motor (BLDC), Switched Reluctance Motor (SRM), and Induction Motors (IM). Furthermore, this paper discusses the EV-motors history, types of EVmotors, EV-motor drives powertrain mathematical modelling, and design procedure of EV-motors. The hardware results have also been compared with different control techniques for BLDC and SRM hub motors. Future direction towards the design of EV by critical selection of motors and their control techniques to minimize the torque ripple and other research opportunities to enhance the performance of EVs are also presented.publishedVersio

    Analysis of longitudinal-vertical coupling vibration of four hub motors driven electric vehicle under unsteady condition

    Get PDF
    The influence of hub motor unbalanced magnetic force (UMF) on the vibration of electric vehicle under steady state conditions has been known, but under unsteady conditions, the hub motor UMF will change with the vehicle operation condition, and there would exist complex coupling vibration for the hub motors driven electric vehicle. Here, the longitudinal-vertical coupling dynamics of the four hub motors driven electric vehicle under unsteady condition is studied. Integrating the motor electromagnetic excitation and electric vehicle dynamics, a longitudinal-vertical coupling dynamics model of the four hub motors driven electric vehicle is established. Based on the variable switching frequency field-oriented control model, analytical model of the UMFs acting on the motor stator and rotor parts under unsteady condition are developed. For model validation, a four hub motors driven electric vehicle has been tested, the accuracy of the longitudinal-vertical coupling dynamics model established in this paper was verified. Then, longitudinal-vertical coupling vibration characteristics of the four hub motors driven electric vehicle under road excitation and coupling excitation are analyzed. The results show that the longitudinal and vertical movement of the four hub motors driven electric vehicle is coupled by hub motor. In addition, under unsteady condition, the motor UMFs will cause vertical vibration of the electric vehicle body and hub motor stator, the vibration shows order characteristics including low order harmonic hfc and inverter switching frequency sideband harmonic k1fs±k2fc (fc = pn/60, fs is inverter switching frequency, k1 and k2 are positive integers, p is the number of pole pairs and n is motor speed.). The motor electromagnetic torque will cause longitudinal vibration of the electric vehicle body, the vibration shows order characteristics including harmonics fs±3fc and 2fs. The main harmonic of vehicle body pitch angle acceleration is 2fs.</p

    Fuzzy Controller Based DTC of SRM Drive Fed by Common High Side Asymmetric Switch Converter

    Get PDF
    The switched reluctance motor (SRM) is recently gaining huge popularity in electric vehicle (EV) applications due to its control flexibility, simple structure, lower cost and high efficiency than the synchronous and induction motors. Among all the controllers, the direct torque control (DTC) is the most preferred due to its higher efficiency, lower losses and superior control characteristics. In this paper, a 6/4 pole SRM with fuzzy logic based DTC has been proposed for the EV application along with a converter with reduced switch counts to reduce the torque ripples and enhance the performance of the system under steady and transient state conditions. The proposed system is tested and validated under various scenarios that include load torque and speed variations and compared with the vector control method. From, the investigation it has been found that the proposed technique reduces ripples from the system during all the scenarios with a resultant flux of less than 0.5pu

    New design of switched reluctance motor using finite element analysis for hybrid electric vehicle applications

    Get PDF
    Switched reluctance motors (SRMs) have been gaining increasing popularity and emerging as an attractive alternative to traditional electrical motors in hybrid vehicle applications due to their simple structure, ruggedness, ability of fault-tolerance, extremely high-speed operation, high power density, and low manufacturing cost. However, large torque ripple and acoustic noise are well-known as their major disadvantages. This thesis presents a novel five-phase 15/12 SRM which features higher power density, very low level of vibration with flexibility in controlling the torque ripple profile. This design is classified as an axial field SRM, hence it needs 3-dimensional finite-element analysis model. Nonetheless, an alternative 2-dimensional model is developed and simulated using FEA software (MagNet) in order to analyze the proposed model. The findings from the simulation is scrutinized and analyzed to realize various design features along with performance of the model. The finding in reference to the proposed axial field model is then compared with existing radial field models to validate its performance improvement. The manufacturing issues were addressed to prove its feasibility and cost effectiveness in conjunction with its assembly competences. Taking all the aspects into account superiority of new model\u27s efficiency is comprehended to justify its application in HEV application

    Advancements in Flux Switching Machine Optimization : Applications and Future Prospects

    Get PDF
    This work was supported by the Commonwealth Scholarship Commission, U. K., under Grant Number: NGCN-180-2021Peer reviewe

    A novel step current excitation control method to reduce the torque ripple of outer-rotor switched reluctance motors

    Get PDF
    Featured in low-speed and high-torque operation, outer-rotor switched reluctance motors (OSRMs) have the potential to be widely deployed in low-speed commuter and logistics vehicle applications. In this paper, a five-phase OSRM and the control method featuring torque ripple reduction has been proposed, which can be applied as the wheel hub motor in the electric vehicles. The simulation was carried out to analyze the OSRM operation. The electromagnetic characteristics of single-phase and two-phase hybrid excitation mode, as well as step current excitation mode, were compared and analyzed. To solve the problem of the large torque ripple of OSRMs under traditional excitation modes, the torque ripple suppression method based on step current excitation was also studied. The experiment design, including motor start-up control, speed control, and torque ripple reduction, are presented to verify the system torque ripple mitigation method

    A switched reluctance motor torque ripple reduction strategy with deadbeat current control and active thermal management

    Get PDF
    This paper presents a switched reluctance motor (SRM) torque ripple reduction strategy with deadbeat current control and active thermal management. In this method, the SRM torque is indirectly controlled by the phase current. A deadbeat current control method is used to improve the SRM phase current control accuracy, so that SRM torque control error can be reduced significantly. According to the online measurement of the power switching device temperature, the switching frequency will be reduced to prevent the SRM power converter from being damaged by over-temperature. The feasibility and effectiveness of the proposed strategy have been verified in both simulation and experimental studies
    corecore