Energy Harvesting in Wireless Applications

The objective of this thesis has been to study how extensive current research has gone within energy harvesting and to investigate a solution for making the OLP425 (a sensor module developed by ConnectBlue AB) independent of a conventional battery as energy source, whilst staying wireless. This has been done by investigating the amounts of energy that is available from our surroundings (e.g. solar´radiation, thermal gradients, and radio waves) and how suitable the methods are for supplying the OLP425. A solution based on a photovoltaic cell was chosen and an electrical circuit was designed around it, powering the OLP425 and recharging a Li-ion rechargeable battery. It was successful in powering the OLP425 but limited by the sensor module’s duty cycle. Whilst being a successful solution there is still more to investigate in the field that includes other energy harvesting methods where some require a larger business model to implement

Integrated cmos rectifier for rf-powered wireless sensor network nodes

This article presents a review of the CMOS rectifier for radio frequency energy harvesting application. The on-chip rectifier converts the ambient low-power radio frequency signal coming to antenna to useable DC voltage that recharges energy to wireless sensor network (WSN) nodes and radiofrequency identification (RFID) tags, therefore the rectifier is the most important part of the radio frequency energy harvesting system. The impedance matching network maximizes power transfer from antenna to rectifier. The design and comparison between the simulation results of one- and multi-stage differential drive cross connected rectifier (DDCCR) at the operating frequencies of 2.44GHz, and 28GHz show the output voltage of the multi-stage rectifier doubles at each added stage and power conversion efficiency (PCE) of rectifier at 2.44GHz was higher than 28GHz. The (DDCCR) rectifier is the most efficient rectifier topology to date and is used widely for passive WSN nodes and RFID tags

DTER: Schedule Optimal RF Energy Request and Harvest for Internet of Things

We propose a new energy harvesting strategy that uses a dedicated energy source (ES) to optimally replenish energy for radio frequency (RF) energy harvesting powered Internet of Things. Specifically, we develop a two-step dual tunnel energy requesting (DTER) strategy that minimizes the energy consumption on both the energy harvesting device and the ES. Besides the causality and capacity constraints that are investigated in the existing approaches, DTER also takes into account the overhead issue and the nonlinear charge characteristics of an energy storage component to make the proposed strategy practical. Both offline and online scenarios are considered in the second step of DTER. To solve the nonlinear optimization problem of the offline scenario, we convert the design of offline optimal energy requesting problem into a classic shortest path problem and thus a global optimal solution can be obtained through dynamic programming (DP) algorithms. The online suboptimal transmission strategy is developed as well. Simulation study verifies that the online strategy can achieve almost the same energy efficiency as the global optimal solution in the long term

Integrated CMOS rectifier for RF-powered wireless sensor network nodes

This article presents a review of the CMOS rectifier for radio frequency energy harvesting application. The on-chip rectifier converts the ambient low-power radio frequency signal coming to antenna to useable DC voltage that recharges energy to wireless sensor network (WSN) nodes and radiofrequency identification (RFID) tags, therefore the rectifier is the most important part of the radio frequency energy harvesting system. The impedance matching network maximizes power transfer from antenna to rectifier. The design and comparison between the simulation results of oneand multi-stage differential drive cross connected rectifier (DDCCR) at the operating frequencies of 2.44GHz, and 28GHz show the output voltage of the multi-stage rectifier doubles at each added stage and power conversion efficiency (PCE) of rectifier at 2.44GHz was higher than 28GHz. The (DDCCR) rectifier is the most efficient rectifier topology to date and is used widely for passive WSN nodes and RFID tag

SURE: A Novel Approach for Self Healing Battery Starved Users using Energy Harvesting

Radio Frequency (RF) energy harvesting holds a promising future for energizing low power mobile devices in next generation wireless networks. Harvesting from a dedicated RF energy source acquires much more energy than simply harvesting from ambient RF sources. In this paper, novel Self-healing of Users equipment by RF Energy transfer scheme is introduced between the network operator and battery starved users to heal and extend their battery life time by sending dedicated energy from different sources in order to be aggregated and harvested by starved users. This approach depends on the concept of Energy as a Service where the network operator delivers energy to battery starved users in the next generation networks. A mixed integer non-linear optimization problem is formulated and solved efficiently using three heuristic algorithms. Simulation results prove that sufficient amounts of energy can be delivered to starved users while minimizing their uplink power requirements and guaranteeing a minimum uplink data rate

Printable Organic Thermoelectric Energy Harvesting Devices For Applications In Wearable Biomedical Devices

Thermal energy as an alternative renewable source of electricity can be used in a wide range of applications. Over the past decade, thermoelectric (TE) devices have emerged as potential candidates to convert thermal energy to electrical power. Due to the advantages of using organic TE materials over conventional TE generators, including light weight, low thermal conductivity, cost effectiveness, flexibility, and processability, they have become the subject of universal research in recent years. Poly (3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS) is a promising candidate among other polymers to be used in TE modules due to its unique characteristics. Therefore, the focus on this thesis was to design and develop a thermoelectric energy harvesting module using only PEDOT: PSS as the active component. In addition, in order to test the performance of the module, a test setup was designed and developed particularly for the purpose of this work. The performance of the TE device was evaluated by examining an induced voltage resulting from establishing a temperature difference across the two sides of the modules. It was observed that by increasing the temperature difference across the module, the generated voltage will also increase linearly reaching a maximum value of 280 μV for a 40 °C temperature difference. The TE device developed in this work can be used as a power source in a wide range of applications from electronic devices to power supplies for distributed sensor networks in the Internet of Things. However, the main application is wearable medical devices in which the electricity is generated by thermoelectric conversion of body heat

Wireless Power Transfer For Biomedical Applications

In this research wireless power transfer using near-field inductive coupling is studied and investigated. The focus is on delivering power to implantable biomedical devices. The objective of this research is to optimize the size and performance of the implanted wireless biomedical sensors by: (1) proposing a hybrid multiband communication system for implantable devices that combines wireless communication link and power transfer, and (2) optimizing the wireless power delivery system. Wireless data and power links are necessary for many implanted biomedical devices such as biosensors, neural recording and stimulation devices, and drug delivery and monitoring systems. The contributions from this research work are summarized as follows: 1. Development of a combination of inductive power transfer and antenna system. 2. Design and optimization of novel microstrip antenna that may resonate at different ultra-high frequency bands including 415 MHz, 905 MHz, and 1300MHz. These antennas may be used to transfer power through radiation or send/receive data. 3. Design of high-frequency coil (13.56 MHz) to transfer power and optimization of the parameters for best efficiency. 4. Study of the performance of the hybrid antenna/coil system at various depths inside a body tissue model. 5. Minimizing the coupling effect between the coil and the antenna through addressed by optimizing their dimensions. 6. Study of the effects of lateral and angular misalignment on a hybrid compact system consisting of coil and antenna, as well as design and optimize the coilâs geometry which can provide maximum power efficiency under misalignment conditions. 7. Address the effects of receiver bending of a hybrid power transfer and communication system on the communication link budget and the transmitted power. 8. Study the wireless power transfer safety and security systems

Supplying the Power Requirements to a Sensor Network Using Radio Frequency Power Transfer

sensor

Silicon nanowire field-effect transistors for the detection of proteins

In this dissertation I present results on our efforts to increase the sensitivity and selectivity of silicon nanowire ion-sensitive field-effect transistors for the detection of biomarkers, as well as a novel method for wireless power transfer based on metamaterial rectennas for their potential use as implantable sensors. The sensing scheme is based on changes in the conductance of the semiconducting nanowires upon binding of charged entities to the surface, which induces a field-effect. Monitoring the differential conductance thus provides information of the selective binding of biological molecules of interest to previously covalently linked counterparts on the nanowire surface. In order to improve on the performance of the nanowire sensing, we devised and fabricated a nanowire Wheatstone bridge, which allows canceling out of signal drift due to thermal fluctuations and dynamics of fluid flow. We showed that balancing the bridge significantly improves the signal-to-noise ratio. Further, we demonstrated the sensing of novel melanoma biomarker TROY at clinically relevant concentrations and distinguished it from nonspecific binding by comparing the reaction kinetics. For increased sensitivity, an amplification method was employed using an enzyme which catalyzes a signal-generating reaction by changing the redox potential of a redox pair. In addition, we investigated the electric double layer, which forms around charges in an electrolytic solution. It causes electrostatic screening of the proteins of interest, which puts a fundamental limitation on the biomarker detection in solutions with high salt concentrations, such as blood. We solved the coupled Nernst-Planck and Poisson equations for the electrolyte under influence of an oscillating electric field and discovered oscillations of the counterion concentration at a characteristic frequency. In addition to exploring different methods for improved sensing capabilities, we studied an innovative method to supply power to implantable biosensors wirelessly, eliminating the need for batteries. A metamaterial split ring resonator is integrated with a rectifying circuit for efficient conversion of microwave radiation to direct electrical power. We studied the near-field behavior of this rectenna with respect to distance, polarization, power, and frequency. Using a 100 mW microwave power source, we demonstrated operating a simple silicon nanowire pH sensor with light indicator