Fully Learnable Front-End for Multi-Channel Acoustic Modeling using Semi-Supervised Learning

In this work, we investigated the teacher-student training paradigm to train a fully learnable multi-channel acoustic model for far-field automatic speech recognition (ASR). Using a large offline teacher model trained on beamformed audio, we trained a simpler multi-channel student acoustic model used in the speech recognition system. For the student, both multi-channel feature extraction layers and the higher classification layers were jointly trained using the logits from the teacher model. In our experiments, compared to a baseline model trained on about 600 hours of transcribed data, a relative word-error rate (WER) reduction of about 27.3% was achieved when using an additional 1800 hours of untranscribed data. We also investigated the benefit of pre-training the multi-channel front end to output the beamformed log-mel filter bank energies (LFBE) using L2 loss. We find that pre-training improves the word error rate by 10.7% when compared to a multi-channel model directly initialized with a beamformer and mel-filter bank coefficients for the front end. Finally, combining pre-training and teacher-student training produces a WER reduction of 31% compared to our baseline.Comment: To appear in ICASSP 202

Effects of a near-field rigid sphere scatterer on the performance of linear microphone array beamformers

© 2016 Acoustical Society of America. Beamformers enable a microphone array to capture acoustic signals from a sound source with high signal to noise ratio in a noisy environment, and the linear microphone array is of particular importance, in practice, due to its simplicity and easy implementation. A linear microphone array sometimes is used near some scattering objects, which affect its beamforming performance. This paper develops a numerical model with a linear microphone array near a rigid sphere for both far-field plane wave and near-field sources. The effects of the scatterer on two typical beamformers, i.e., the delay-and-sum beamformer and the superdirective beamformer, are investigated by both simulations and experiments. It is found that the directivity factor of both beamformers improves due to the increased equivalent array aperture when the size of the array is no larger than that of the scatter. With the increase of the array size, the directivity factor tends to deteriorate at high frequencies because of the rising side-lobes. When the array size is significantly larger than that of the scatterer, the scattering has hardly any influence on the beamforming performance

A Low-Cost Robust Distributed Linearly Constrained Beamformer for Wireless Acoustic Sensor Networks with Arbitrary Topology

We propose a new robust distributed linearly constrained beamformer which utilizes a set of linear equality constraints to reduce the cross power spectral density matrix to a block-diagonal form. The proposed beamformer has a convenient objective function for use in arbitrary distributed network topologies while having identical performance to a centralized implementation. Moreover, the new optimization problem is robust to relative acoustic transfer function (RATF) estimation errors and to target activity detection (TAD) errors. Two variants of the proposed beamformer are presented and evaluated in the context of multi-microphone speech enhancement in a wireless acoustic sensor network, and are compared with other state-of-the-art distributed beamformers in terms of communication costs and robustness to RATF estimation errors and TAD errors

Advanced algorithms for audio and image processing

The objective of the thesis is the development of a set of innovative algorithms around the topic of beamforming in the field of acoustic imaging, audio and image processing, aimed at significantly improving the performance of devices that exploit these computational approaches. Therefore the context is the improvement of devices (ultrasound machines and video/audio devices) already on the market or the development of new ones which, through the proposed studies, can be introduced on new the markets with the launch of innovative high-tech start-ups. This is the motivation and the leitmotiv behind the doctoral work carried out. In fact, in the first part of the work an innovative image reconstruction algorithm in the field of ultrasound biomedical imaging is presented, which is connected to the development of such equipment that exploits the computing opportunities currently offered nowadays at low cost by GPUs (Moore\u2019s law). The proposed target is to obtain a new pipeline of the reconstruction of the image abandoning the architecture of such hardware based In the first part of the thesis I faced the topic of the reconstruction of ultrasound images for applications hypothesized on a software based device through image reconstruction algorithms processed in the frequency domain. An innovative beamforming algorithm based on seismic migration is presented, in which a transformation of the RF data is carried out and the reconstruction algorithm can evaluate a masking of the k-space of the data, speeding up the reconstruction process and reducing the computational burden. The analysis and development of the algorithms responsible for carrying out the thesis has been approached from a feasibility point in an off-line context and on the Matlab platform, processing both synthetic simulated generated data and real RF data: the subsequent development of these algorithms within of the future ultrasound biomedical equipment will exploit an high-performance computing framework capable of processing customized kernel pipelines (henceforth called \u2019filters\u2019) on CPU/GPU. The type of filters implemented involved the topic of Plane Wave Imaging (PWI), an alternative method of acquiring the ultrasound image compared to the state of the art of the traditional standard B-mode which currently exploit sequential sequence of insonification of the sample under examination through focused beams transmitted by the probe channels. The PWI mode is interesting and opens up new scenarios compared to the usual signal acquisition and processing techniques, with the aim of making signal processing in general and image reconstruction in particular faster and more flexible, and increasing importantly the frame rate opens up and improves clinical applications. The innovative idea is to introduce in an offline seismic reconstruction algorithm for ultrasound imaging a further filter, named masking matrix. The masking matrices can be computed offline knowing the system parameters, since they do not depend from acquired data. Moreover, they can be pre-multiplied to propagation matrices, without affecting the overall computational load. Subsequently in the thesis, the topic of beamforming in audio processing on super-direct linear arrays of microphones is addressed. The aim is to make an in depth analysis of two main families of data-independent approaches and algorithms present in the literature by comparing their performances and the trade-off between directivity and frequency invariance, which is not yet known at to the state-of-the-art. The goal is to validate the best algorithm that allows, from the perspective of an implementation, to experimentally verify performance, correlating it with the characteristics and error statistics. Frequency-invariant beam patterns are often required by systems using an array of sensors to process broadband signals. In some experimental conditions, the array spatial aperture is shorter than the involved wavelengths. In these conditions, superdirective beamforming is essential for an efficient system. I present a comparison between two methods that deal with a data-independent beamformer based on a filter-and-sum structure. Both methods (the first one numerical, the second one analytic) formulate a mathematical convex minimization problem, in which the variables to be optimized are the filters coefficients or frequency responses. In the described simulations, I have chosen a geometry and a set-up of parameters that allows us to make a fair comparison between the performances of the two different design methods analyzed. In particular, I addressed a small linear array for audio capture with different purposes (hearing aids, audio surveillance system, video-conference system, multimedia device, etc.). The research activity carried out has been used for the launch of a high-tech device through an innovative start-up in the field of glasses/audio devices (https://acoesis.com/en/). It has been proven that the proposed algorithm gives the possibility of obtaining higher performances than the state of the art of similar algorithms, additionally providing the possibility of connecting directivity or better generalized directivity to the statistics of phase errors and gain of sensors, extremely important in superdirective arrays in the case of real and industrial implementation. Therefore, the method proposed by the comparison is innovative because it quantitatively links the physical construction characteristics of the array to measurable and experimentally verifiable quantities, making the real implementation process controllable. The third topic faced is the reconstruction of the Room Impluse Response (RIR) using audio processing blind methods. Given an unknown audio source, the estimation of time differences-of-arrivals (TDOAs) can be efficiently and robustly solved using blind channel identification and exploiting the cross-correlation identity (CCI). Prior blind works have improved the estimate of TDOAs by means of different algorithmic solutions and optimization strategies, while always sticking to the case N = 2 microphones. But what if we can obtain a direct improvement in performance by just increasing N? In the fourth Chapter I tried to investigate this direction, showing that, despite the arguable simplicity, this is capable of (sharply) improving upon state-of-the-art blind channel identification methods based on CCI, without modifying the computational pipeline. Inspired by our results, we seek to warm up the community and the practitioners by paving the way (with two concrete, yet preliminary, examples) towards joint approaches in which advances in the optimization are combined with an increased number of microphones, in order to achieve further improvements. Sound source localisation applications can be tackled by inferring the time-difference-of-arrivals (TDOAs) between a sound-emitting source and a set of microphones. Among the referred applications, one can surely list room-aware sound reproduction, room geometry\u2019s estimation, speech enhancement. Despite a broad spectrum of prior works estimate TDOAs from a known audio source, even when the signal emitted from the acoustic source is unknown, TDOAs can be inferred by comparing the signals received at two (or more) spatially separated microphones, using the notion of cross-corrlation identity (CCI). This is the key theoretical tool, not only, to make the ordering of microphones irrelevant during the acquisition stage, but also to solve the problem as blind channel identification, robustly and reliably inferring TDOAs from an unknown audio source. However, when dealing with natural environments, such \u201cmutual agreement\u201d between microphones can be tampered by a variety of audio ambiguities such as ambient noise. Furthermore, each observed signal may contain multiple distorted or delayed replicas of the emitting source due to reflections or generic boundary effects related to the (closed) environment. Thus, robustly estimating TDOAs is surely a challenging problem and CCI-based approaches cast it as single-input/multi-output blind channel identification. Such methods promote robustness in the estimate from the methodological standpoint: using either energy-based regularization, sparsity or positivity constraints, while also pre-conditioning the solution space. Last but not least, the Acoustic Imaging is an imaging modality that exploits the propagation of acoustic waves in a medium to recover the spatial distribution and intensity of sound sources in a given region. Well known and widespread acoustic imaging applications are, for example, sonar and ultrasound. There are active and passive imaging devices: in the context of this thesis I consider a passive imaging system called Dual Cam that does not emit any sound but acquires it from the environment. In an acoustic image each pixel corresponds to the sound intensity of the source, the whose position is described by a particular pair of angles and, in the case in which the beamformer can, as in our case, work in near-field, from a distance on which the system is focused. In the last part of this work I propose the use of a new modality characterized by a richer information content, namely acoustic images, for the sake of audio-visual scene understanding. Each pixel in such images is characterized by a spectral signature, associated to a specific direction in space and obtained by processing the audio signals coming from an array of microphones. By coupling such array with a video camera, we obtain spatio-temporal alignment of acoustic images and video frames. This constitutes a powerful source of self-supervision, which can be exploited in the learning pipeline we are proposing, without resorting to expensive data annotations. However, since 2D planar arrays are cumbersome and not as widespread as ordinary microphones, we propose that the richer information content of acoustic images can be distilled, through a self-supervised learning scheme, into more powerful audio and visual feature representations. The learnt feature representations can then be employed for downstream tasks such as classification and cross-modal retrieval, without the need of a microphone array. To prove that, we introduce a novel multimodal dataset consisting in RGB videos, raw audio signals and acoustic images, aligned in space and synchronized in time. Experimental results demonstrate the validity of our hypothesis and the effectiveness of the proposed pipeline, also when tested for tasks and datasets different from those used for training. Chapter 6 closes the thesis, presenting a development activity of a new Dual Cam POC to build-up from it a spin-off, assuming to apply for an innovation project for hi-tech start- ups (such as a SME instrument H2020) for a 50Keuro grant, following the idea of the technology transfer. A deep analysis of the reference market, technologies and commercial competitors, business model and the FTO of intellectual property is then conducted. Finally, following the latest technological trends (https://www.flir.eu/products/si124/) a new version of the device (planar audio array) with reduced dimensions and improved technical characteristics is simulated, simpler and easier to use than the current one, opening up new interesting possibilities of development not only technical and scientific but also in terms of business fallout

The Statistics of Superdirective Beam Patterns

Superdirective arrays have been extensively studied because of their considerable potential accompanied, unfortunately, by a high sensitivity to random errors that affect the responses and positions of array elements. However, the statistics of their actual beam pattern (BP) has never been systematically investigated. This paper shows that the Rician probability density function (PDF), sometimes adopted to study the impact of errors in conventional arrays, is a valid approximation for superdirective BP statistics only where some mathematical terms are negligible. The paper also shows that this is the case for all linear end-fire arrays considered. A similar study is proposed concerning the correlation between BP lobes, showing that for the superdirective arrays considered the lobes, especially non-adjacent ones, are almost independent. Furthermore, knowledge of the PDF of the actual BP allows one to define quantile BP functions, whose probability of being exceeded, at any point, is fixed. Combining the lobes' independence with quantile BP functions, an empirical equation for the probability that the entire actual BP will not exceed a quantile function over an interval larger than a given size is obtained. This new knowledge and these tools make it possible to devise new methods to design robust superdirective arrays via optimization goals with clearer and more relevant statistical meaning

Akustinen monimikrofonikeilanmuodostus käytännöllisessä laitteessa

Signal quality and noiselessness is important for Automatic Speech Recognition and communications. These can be achieved with the help of microphone arrays and beamforming. Multiple microphones can be used to pick sound coming from one direction while attenuating other directions. In this thesis, three arrays and three beamformers are compared. The target is to see how different structures affect the output signal and if one of the arrays is superior to the others. The results show that the baffled array appears bigger than the reference array or the array on the top surface of a cylinder, but it adds complexity to the beamformers. For Automatic Speech Recognition, all three arrays performed the same, but there were clear differences between the beamforming algorithms. Thus the array to use depends on the use-case and especially on the industrial design of the device.Äänenlaatu ja kohinattomuus ovat tärkeitä automaattisen puheentunnistuksen ja puheviestinnän toimivuuden kannalta. Mikrofoniryhmiä ja keilanmuodostusta voidaan käyttää parantamaan signaalin laatua ja vähentämään kohinaa nauhoittamalla vain yhdestä suunnasta tulevaa ääntä. Tässä työssä vertaillaan kolmea mikrofoniryhmää ja kolmea keilanmuodostusalgoritmia. Tarkoituksena on selvittää miten erilaiset rakenteet, joihin mikrofoniryhmä on kiinnitettynä vaikuttaa nauhoitettuun signaaliin, ja jos jokin ryhmistä on merkittävästi parempi kuin muut. Tulokset osoittavat, että sylinterin ulkoreunalle kiinnitetty mikrofoniryhmä vaikuttaa akustisesti suuremmalta kuin referenssi mikrofoniryhmä tai sylinterin päälipinnalle kiinnitetty mikrofoniryhmä, mutta se lisää keilanmuodostusalgoritmin monimutkaisuutta. Automaattisessa puheentunnistuksessa kaikki kolme mikrofoniryhmää suoriutuivat yhtä hyvin, mutta keilanmuodostusalgoritmien suorituskyvyssä oli selkeät erot. Käytännössä siis mikrofoniryhmä kannattaa valita käyttötarkoitukseen ja etenkin lopullisen tuotteen teollisen muotoiluun sopivaksi

Implementation and evaluation of a low complexity microphone array for speaker recognition

Includes bibliographical references (leaves 83-86).This thesis discusses the application of a microphone array employing a noise canceling beamforming technique for improving the robustness of speaker recognition systems in a diffuse noise field

Speech processing using digital MEMS microphones

The last few years have seen the start of a unique change in microphones for consumer devices such as smartphones or tablets. Almost all analogue capacitive microphones are being replaced by digital silicon microphones or MEMS microphones. MEMS microphones perform differently to conventional analogue microphones. Their greatest disadvantage is significantly increased self-noise or decreased SNR, while their most significant benefits are ease of design and manufacturing and improved sensitivity matching. This thesis presents research on speech processing, comparing conventional analogue microphones with the newly available digital MEMS microphones. Specifically, voice activity detection, speaker diarisation (who spoke when), speech separation and speech recognition are looked at in detail. In order to carry out this research different microphone arrays were built using digital MEMS microphones and corpora were recorded to test existing algorithms and devise new ones. Some corpora that were created for the purpose of this research will be released to the public in 2013. It was found that the most commonly used VAD algorithm in current state-of-theart diarisation systems is not the best-performing one, i.e. MLP-based voice activity detection consistently outperforms the more frequently used GMM-HMM-based VAD schemes. In addition, an algorithm was derived that can determine the number of active speakers in a meeting recording given audio data from a microphone array of known geometry, leading to improved diarisation results. Finally, speech separation experiments were carried out using different post-filtering algorithms, matching or exceeding current state-of-the art results. The performance of the algorithms and methods presented in this thesis was verified by comparing their output using speech recognition tools and simple MLLR adaptation and the results are presented as word error rates, an easily comprehensible scale. To summarise, using speech recognition and speech separation experiments, this thesis demonstrates that the significantly reduced SNR of the MEMS microphone can be compensated for with well established adaptation techniques such as MLLR. MEMS microphones do not affect voice activity detection and speaker diarisation performance