NON-PARAMETRIC STATISTICAL APPROACH TO CORRECT SATELLITE RAINFALL DATA IN NEAR-REAL-TIME FOR RAIN BASED FLOOD NOWCASTING

Floods resulting from intense rainfall are one of the most disastrous hazards in many regions of the world since they contribute greatly to personal injury and to property damage mainly as a result of their ability to strike with little warning. The possibility to give an alert about a flooding situation at least a few hours before helps greatly to reduce the damage. Therefore, scores of flood forecasting systems have been developed during the past few years mainly at country level and regional level. Flood forecasting systems based only on traditional methods such as return period of flooding situations or extreme rainfall events have failed on most occasions to forecast flooding situations accurately because of changes on territory in recent years by extensive infrastructure development, increased frequency of extreme rainfall events over recent decades, etc. Nowadays, flood nowcasting systems or early warning systems which run on real- time precipitation data are becoming more popular as they give reliable forecasts compared to traditional flood forecasting systems. However, these kinds of systems are often limited to developed countries as they need well distributed gauging station networks or sophisticated surface-based radar systems to collect real-time precipitation data. In most of the developing countries and in some developed countries also, precipitation data from available sparse gauging stations are inadequate for developing representative aerial samples needed by such systems. As satellites are able to provide a global coverage with a continuous temporal availability, currently the possibility of using satellite-based rainfall estimates in flood nowcasting systems is being highly investigated. To contribute to the world's requirement for flood early warning systems, ITHACA developed a global scale flood nowcasting system that runs on near-real-time satellite rainfall estimates. The system was developed in cooperation with United Nations World Food Programme (WFP), to support the preparedness phase of the WFP like humanitarian assistance agencies, mainly in less developed countries. The concept behind this early warning system is identifying critical rainfall events for each hydrological basin on the earth with past rainfall data and using them to identify floodable rainfall events with real time rainfall data. The individuation of critical rainfall events was done with a hydrological analysis using 3B42 rainfall data which is the most accurate product of Tropical Rainfall Measuring Mission (TRMM) Multi-satellite Precipitation Analysis (TMPA) dataset. These critical events have been stored in a database and when a rainfall event is found in real-time which is similar or exceeds the event in the database an alert is issued for the basin area. The most accurate product of TMPA (3B42) is derived by applying bias adjustments to real time rainfall estimates using rain gauge data, thus it is available for end-users 10-15 days after each calendar month. The real time product of TMPA (3B42RT) is released approximately 9 hours after real-time and lacks of such kind of bias adjustments using rain gauge data as rain gauge data are not available in real time. Therefore, to have reliable alerts it is very important to reduce the uncertainty of 3B42RT product before using it in the early warning system. For this purpose, a statistical approach was proposed to make near real- time bias adjustments for the near real time product of TMPA (3B42RT). In this approach the relationship between the bias adjusted rainfall data product (3B42) and the real-time rainfall data product (3B42RT) was analyzed on the basis of drainage basins for the period from January 2003 to December 2007, and correction factors were developed for each basin worldwide to perform near real-time bias adjusted product estimation from the real-time rainfall data product (3B42RT). The accuracy of the product was analyzed by comparing with gauge rainfall data from Bangladesh and it was found that the uncertainty of the product is less even than the most accurate product of TMPA dataset (3B42

Guidance for benthic habitat mapping: an aerial photographic approach

This document, Guidance for Benthic Habitat Mapping: An Aerial Photographic Approach, describes proven technology that can be applied in an operational manner by state-level scientists and resource managers. This information is based on the experience gained by NOAA Coastal Services Center staff and state-level cooperators in the production of a series of benthic habitat data sets in Delaware, Florida, Maine, Massachusetts, New York, Rhode Island, the Virgin Islands, and Washington, as well as during Center-sponsored workshops on coral remote sensing and seagrass and aquatic habitat assessment. (PDF contains 39 pages) The original benthic habitat document, NOAA Coastal Change Analysis Program (C-CAP): Guidance for Regional Implementation (Dobson et al.), was published by the Department of Commerce in 1995. That document summarized procedures that were to be used by scientists throughout the United States to develop consistent and reliable coastal land cover and benthic habitat information. Advances in technology and new methodologies for generating these data created the need for this updated report, which builds upon the foundation of its predecessor

Airborne photogrammetry and LIDAR for DSM extraction and 3D change detection over an urban area : a comparative study

A digital surface model (DSM) extracted from stereoscopic aerial images, acquired in March 2000, is compared with a DSM derived from airborne light detection and ranging (lidar) data collected in July 2009. Three densely built-up study areas in the city centre of Ghent, Belgium, are selected, each covering approximately 0.4 km(2). The surface models, generated from the two different 3D acquisition methods, are compared qualitatively and quantitatively as to what extent they are suitable in modelling an urban environment, in particular for the 3D reconstruction of buildings. Then the data sets, which are acquired at two different epochs t(1) and t(2), are investigated as to what extent 3D (building) changes can be detected and modelled over the time interval. A difference model, generated by pixel-wise subtracting of both DSMs, indicates changes in elevation. Filters are proposed to differentiate 'real' building changes from false alarms provoked by model noise, outliers, vegetation, etc. A final 3D building change model maps all destructed and newly constructed buildings within the time interval t(2) - t(1). Based on the change model, the surface and volume of the building changes can be quantified

Mapping and classification of ecologically sensitive marine habitats using unmanned aerial vehicle (UAV) imagery and object-based image analysis (OBIA)

Nowadays, emerging technologies, such as long-range transmitters, increasingly miniaturized components for positioning, and enhanced imaging sensors, have led to an upsurge in the availability of new ecological applications for remote sensing based on unmanned aerial vehicles (UAVs), sometimes referred to as “drones”. In fact, structure-from-motion (SfM) photogrammetry coupled with imagery acquired by UAVs offers a rapid and inexpensive tool to produce high-resolution orthomosaics, giving ecologists a new way for responsive, timely, and cost-effective monitoring of ecological processes. Here, we adopted a lightweight quadcopter as an aerial survey tool and object-based image analysis (OBIA) workflow to demonstrate the strength of such methods in producing very high spatial resolution maps of sensitive marine habitats. Therefore, three different coastal environments were mapped using the autonomous flight capability of a lightweight UAV equipped with a fully stabilized consumer-grade RGB digital camera. In particular we investigated a Posidonia oceanica seagrass meadow, a rocky coast with nurseries for juvenile fish, and two sandy areas showing biogenic reefs of Sabelleria alveolata. We adopted, for the first time, UAV-based raster thematic maps of these key coastal habitats, produced after OBIA classification, as a new method for fine-scale, low-cost, and time saving characterization of sensitive marine environments which may lead to a more effective and efficient monitoring and management of natural resource