Sample-Parallel Execution of EBCOT in Fast Mode

JPEG 2000’s most computationally expensive building block is the Embedded Block Coder with Optimized Truncation (EBCOT). This paper evaluates how encoders targeting a parallel architecture such as a GPU can increase their throughput in use cases where very high data rates are used. The compression efficiency in the less significant bit-planes is then often poor and it is beneficial to enable the Selective Arithmetic Coding Bypass style (fast mode) in order to trade a small loss in compression efficiency for a reduction of the computational complexity. More importantly, this style exposes a more finely grained parallelism that can be exploited to execute the raw coding passes, including bit-stuffing, in a sample-parallel fashion. For a latency- or memory critical application that encodes one frame at a time, EBCOT’s tier-1 is sped up between 1.1x and 2.4x compared to an optimized GPU-based implementation. When a low GPU occupancy has already been addressed by encoding multiple frames in parallel, the throughput can still be improved by 5% for high-entropy images and 27% for low-entropy images. Best results are obtained when enabling the fast mode after the fourth significant bit-plane. For most of the test images the compression rate is within 1% of the original

Bitplane image coding with parallel coefficient processing

Image coding systems have been traditionally tailored for multiple instruction, multiple data (MIMD) computing. In general, they partition the (transformed) image in codeblocks that can be coded in the cores of MIMD-based processors. Each core executes a sequential flow of instructions to process the coefficients in the codeblock, independently and asynchronously from the others cores. Bitplane coding is a common strategy to code such data. Most of its mechanisms require sequential processing of the coefficients. The last years have seen the upraising of processing accelerators with enhanced computational performance and power efficiency whose architecture is mainly based on the single instruction, multiple data (SIMD) principle. SIMD computing refers to the execution of the same instruction to multiple data in a lockstep synchronous way. Unfortunately, current bitplane coding strategies cannot fully profit from such processors due to inherently sequential coding task. This paper presents bitplane image coding with parallel coefficient (BPC-PaCo) processing, a coding method that can process many coefficients within a codeblock in parallel and synchronously. To this end, the scanning order, the context formation, the probability model, and the arithmetic coder of the coding engine have been re-formulated. The experimental results suggest that the penalization in coding performance of BPC-PaCo with respect to the traditional strategies is almost negligible

A Wavelet Visible Difference Predictor

In this paper, we describe a model of the human visual system (HVS) based on the wavelet transform. This model is largely based on a previously proposed model, but has a number of modifications that make it more amenable to potential integration into a wavelet based image compression scheme. These modifications include the use of a separable wavelet transform instead of the cortex transform, the application of a wavelet contrast sensitivity function (CSF), and a simplified definition of subband contrast that allows us to predict noise visibility directly from wavelet coefficients. Initially, we outline the luminance, frequency, and masking sensitivities of the HVS and discuss how these can be incorporated into the wavelet transform. We then outline a number of limitations of the wavelet transform as a model of the HVS, namely the lack of translational invariance and poor orientation sensitivity. In order to investigate the efficacy of this wavelet based model, a wavelet visible difference predictor (WVDP) is described. The WVDP is then used to predict visible differences between an original and compressed (or noisy) image. Results are presented to emphasize the limitations of commonly used measures of image quality and to demonstrate the performance of the WVDP. The paper concludes with suggestions on how the WVDP can be used to determine a visually optimal quantization strategy for wavelet coefficients and produce a quantitative measure of image quality

A Real Time Image Processing Subsystem: GEZGIN

In this study, a real-time image processing subsystem, GEZGIN, which is currently being developed for BILSAT-1, a 100kg class micro-satellite, is presented. BILSAT-1 is being constructed in accordance with a technology transfer agreement between TÜBITAK-BILTEN (Turkey) and SSTL (UK) and planned to be placed into a 650 km sunsynchronous orbit in Summer 2003. GEZGIN is one of the two Turkish R&D payloads to be hosted on BILSAT-1. One of the missions of BILSAT-1 is constructing a Digital Elevation Model of Turkey using both multi-spectral and panchromatic imagers. Due to limited down-link bandwidth and on-board storage capacity, employment of a realtime image compression scheme is highly advantageous for the mission. GEZGIN has evolved as an implementation to achieve image compression tasks that would lead to an efficient utilization of both the down-link and on-board storage. The image processing on GEZGIN includes capturing of 4-band multi-spectral images of size 2048x2048 8- bit pixels, compressing them simultaneously with the new industry standard JPEG2000 algorithm and forwarding the compressed multi-spectral image to Solid State Data Recorders (SSDR) of BILSAT-1 for storage and down-link transmission. The mission definition together with orbital parameters impose a 6.5 seconds constraint on real-time image compression. GEZGIN meets this constraint by exploiting the parallelism among image processing units and assigning compute intensive tasks to dedicated hardware. The proposed hardware also allows for full reconfigurability of all processing units

High throughput image compression and decompression on GPUs

Diese Arbeit befasst sich mit der Entwicklung eines GPU-freundlichen, intra-only, Wavelet-basierten Videokompressionsverfahrens mit hohem Durchsatz, das für visuell verlustfreie Anwendungen optimiert ist. Ausgehend von der Beobachtung, dass der JPEG 2000 Entropie-Kodierer ein Flaschenhals ist, werden verschiedene algorithmische Änderungen vorgeschlagen und bewertet. Zunächst wird der JPEG 2000 Selective Arithmetic Coding Mode auf der GPU realisiert, wobei sich die Erhöhung des Durchsatzes hierdurch als begrenzt zeigt. Stattdessen werden zwei nicht standard-kompatible Änderungen vorgeschlagen, die (1) jede Bitebebene in nur einem einzelnen Pass verarbeiten (Single-Pass-Modus) und (2) einen echten Rohcodierungsmodus einführen, der sample-weise parallelisierbar ist und keine aufwendige Kontextmodellierung erfordert. Als nächstes wird ein alternativer Entropiekodierer aus der Literatur, der Bitplane Coder with Parallel Coefficient Processing (BPC-PaCo), evaluiert. Er gibt Signaladaptivität zu Gunsten von höherer Parallelität auf und daher wird hier untersucht und gezeigt, dass ein aus verschiedensten Testsequenzen gemitteltes statisches Wahrscheinlichkeitsmodell eine kompetitive Kompressionseffizienz erreicht. Es wird zudem eine Kombination von BPC-PaCo mit dem Single-Pass-Modus vorgeschlagen, der den Speedup gegenüber dem JPEG 2000 Entropiekodierer von 2,15x (BPC-PaCo mit zwei Pässen) auf 2,6x (BPC-PaCo mit Single-Pass-Modus) erhöht auf Kosten eines um 0,3 dB auf 1,0 dB erhöhten Spitzen-Signal-Rausch-Verhältnis (PSNR). Weiter wird ein paralleler Algorithmus zur Post-Compression Ratenkontrolle vorgestellt sowie eine parallele Codestream-Erstellung auf der GPU. Es wird weiterhin ein theoretisches Laufzeitmodell formuliert, das es durch Benchmarking von einer GPU ermöglicht die Laufzeit einer Routine auf einer anderen GPU vorherzusagen. Schließlich wird der erste JPEG XS GPU Decoder vorgestellt und evaluiert. JPEG XS wurde als Low Complexity Codec konzipiert und forderte erstmals explizit GPU-Freundlichkeit bereits im Call for Proposals. Ab Bitraten über 1 bpp ist der Decoder etwa 2x schneller im Vergleich zu JPEG 2000 und 1,5x schneller als der schnellste hier vorgestellte Entropiekodierer (BPC-PaCo mit Single-Pass-Modus). Mit einer GeForce GTX 1080 wird ein Decoder Durchsatz von rund 200 fps für eine UHD-4:4:4-Sequenz erreicht.This work investigates possibilities to create a high throughput, GPU-friendly, intra-only, Wavelet-based video compression algorithm optimized for visually lossless applications. Addressing the key observation that JPEG 2000’s entropy coder is a bottleneck and might be overly complex for a high bit rate scenario, various algorithmic alterations are proposed. First, JPEG 2000’s Selective Arithmetic Coding mode is realized on the GPU, but the gains in terms of an increased throughput are shown to be limited. Instead, two independent alterations not compliant to the standard are proposed, that (1) give up the concept of intra-bit plane truncation points and (2) introduce a true raw-coding mode that is fully parallelizable and does not require any context modeling. Next, an alternative block coder from the literature, the Bitplane Coder with Parallel Coefficient Processing (BPC-PaCo), is evaluated. Since it trades signal adaptiveness for increased parallelism, it is shown here how a stationary probability model averaged from a set of test sequences yields competitive compression efficiency. A combination of BPC-PaCo with the single-pass mode is proposed and shown to increase the speedup with respect to the original JPEG 2000 entropy coder from 2.15x (BPC-PaCo with two passes) to 2.6x (proposed BPC-PaCo with single-pass mode) at the marginal cost of increasing the PSNR penalty by 0.3 dB to at most 1 dB. Furthermore, a parallel algorithm is presented that determines the optimal code block bit stream truncation points (given an available bit rate budget) and builds the entire code stream on the GPU, reducing the amount of data that has to be transferred back into host memory to a minimum. A theoretical runtime model is formulated that allows, based on benchmarking results on one GPU, to predict the runtime of a kernel on another GPU. Lastly, the first ever JPEG XS GPU-decoder realization is presented. JPEG XS was designed to be a low complexity codec and for the first time explicitly demanded GPU-friendliness already in the call for proposals. Starting at bit rates above 1 bpp, the decoder is around 2x faster compared to the original JPEG 2000 and 1.5x faster compared to JPEG 2000 with the fastest evaluated entropy coder (BPC-PaCo with single-pass mode). With a GeForce GTX 1080, a decoding throughput of around 200 fps is achieved for a UHD 4:4:4 sequence