Monostatic Airborne Synthetic Aperture Radar Using Commercial WiMAX Transceivers In the License-exempt Spectrum

The past half-century witnessed an evolution of synthetic aperture radar (SAR). Boosted by digital signal processing (DSP), a variety of SAR imaging algorithms have been developed, in which the wavenumber domain algorithm is mature for airborne SAR and independent of signal waveforms. Apart from the algorithm development, there is a growing interest in how to acquire the raw data of targets’ echoes before the DSP for SAR imaging in a cost-effective way. For the data acquisition, various studies over the past 15 years have shed light on utilizing the signal generated from the ubiquitous broadband wireless technology – orthogonal frequency division multiplexing (OFDM). However, the purpose of this thesis is to enable commercial OFDM-based wireless systems to work as an airborne SAR sensor. The unlicensed devices of Worldwide interoperability for Microwave Access (WiMAX) are the first option, owing to their accessibility, similarity and economy. This dissertation first demonstrates the feasibility of applying WiMAX to SAR by discussing their similar features. Despite the similarities they share, the compatibility of the two technologies is undermined by a series of problems resulted from WiMAX transceiver mechanisms and industrial rules for radiated power. In order to directly apply commercial WiMAX base station transceivers in unlicensed band to airborne SAR application, we propose a radio-frequency (RF) front design together with a signal processing means. To be specific, a double-pole, double-throw (DPDT) switch is inserted between an antenna and two WiMAX transceivers for generating pulsed signal. By simulations, the transmitted power of the SAR sensor is lower than 0dBm, while its imaging range can be over 10km for targets with relatively large radar cross section (RCS), such as a ship. Its range resolution is 9.6m whereas its cross-range resolution is finer than 1m. Equipped with the multi-mode, this SAR sensor is further enhanced to satisfy the requirements of diversified SAR applications. For example, the width of the scan-mode SAR’s range swath is 2.1km, over five times the width of other modes. Vital developed Matlab code is given in Appendix D, and its correctness is shown by comparing with the image of chirped SAR. To summarize, the significance of this dissertation is to propose, for the first time, a design of directly leveraging commercial OFDM-based systems for airborne SAR imaging. Compared with existing designs of airborne SAR, it is a promising low-cost solution

Efficient Raw Signal Generation Based on Equivalent Scatterer and Subaperture Processing for SAR with Arbitrary Motion

An efficient SAR raw signal generation method based on equivalent scatterer and subaperture processing is proposed in this paper. It considers the radar’s motion track, which can obtain the precise raw signal for the real SAR. First, the imaging geometry with arbitrary motion is established, and then the scene is divided into several equidistant rings. Based on the equivalent scatterer model, the approximate expression of the SAR system transfer function is derived, thus each pulse’s raw signal can be generated by the convolution of the transmitted signal and system transfer function, performed by the fast Fourier transform (FFT). To further improve the simulation efficiency, the subaperture and polar subscene processing is used. The system transfer function of pluses for the same subaperture is calculated simultaneously by the weighted sum of all subscenes’ equivalent backscattering coefficient in the same equidistant ring, performed by the nonuniform FFT (NUFFT). The method only involves the FFT, NUFFT and complex multiplication operations, which means the easier implementation and higher efficiency. Simulation results are given to prove the validity of this method

Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

undefine

Technique-Based Exploitation Of Low Grazing Angle SAR Imagery Of Ship Wakes

The pursuit of the understanding of the effect a ship has on water is a field of study that is several hundreds of years old, accelerated during the years of the industrial revolution where the efficiency of a ship’s engine and hull determined the utility of the burgeoning globally important sea lines of communication. The dawn of radar sensing and electronic computation have expanding this field of study still further where new ground is still being broken. This thesis looks to address a niche area of synthetic aperture radar imagery of ship wakes, specifically the imaging geometry utilising a low grazing angle, where significant non-linear effects are often dominant in the environment. The nuances of the synthetic aperture radar processing techniques compounded with the low grazing angle geometry to produce unusual artefacts within the imagery. It is the understanding of these artefacts that is central to this thesis. A sub-aperture synthetic aperture radar technique is applied to real data alongside coarse modelling of a ship and its wake before finally developing a full hydrodynamic model for a ship’s wake from first principles. The model is validated through comparison with previously developed work. The analysis shows that the resultant artefacts are a culmination of individual synthetic aperture radar anomalies and the reaction of the radar energy to the ambient sea surface and spike events

Frequency-modulated continuous-wave synthetic-aperture radar: improvements in signal processing

With the advance of solid state devices, frequency-modulated continuous-wave (FMCW) designs have recently been used in synthetic-aperture radar (SAR) to decrease cost, size, weight and power consumption, making it deployable on smaller mobile plat-forms, including small (< 25 kg) unmanned aerial vehicle(s) (UAV). To foster its mobile uses, several SAR capabilities were studied: moving target indication (MTI) for increased situational awareness, bistatic operation, e.g. in UAV formation flights, for increased range, and signal processing algorithms for faster real-time performance. Most off-the-shelf SAR systems for small mobile platforms are commercial proprie-tary and/or military (ITAR, International Trades in Arms Regulations) restricted. As such, it necessitated the design and build of a prototype FMCW SAR system at the early stage to serve as a research tool. This enabled unrestricted hardware and software modifica-tions and experimentation. A model to analyze the triangularly modulated (TM) linear frequency modulated (LFM) waveform as one signal was established and used to develop a MTI algorithm which is effective for slow moving targets detection. Experimental field data collected by the prototyped FMCW SAR was then used to validate and demonstrate the effectiveness of the proposed MTI method. A bistatic FMCW SAR model was next introduced: Bistatic configuration is a poten-tial technique to overcome the power leakage problem in monostatic FMCW SAR. By mounting the transmitter and receiver on spatially separate mobile (UAV) platforms in formation deployment, the operation range of a bistatic FMCW SAR can be significantly improved. The proposed approximation algorithm established a signal model for bistatic FMCW SAR by using the Fresnel approximation. This model allows the existing signal processing algorithms to be used in bistatic FMCW SAR image generation without sig-nificant modification simplifying bistatic FMCW SAR signal processing. The proposed range migration algorithm is a versatile and efficient FMCW SAR sig-nal processing algorithm which requires less memory and computational load than the traditional RMA. This imaging algorithm can be employed for real-time image genera-tion by the FMCW SAR system on mobile platforms. Simulation results verified the pro-posed spectral model and experimental data demonstrated the effectiveness of the modi-fied RMA

Spaceborne Video Synthetic Aperture Radar (SAR): A New Microwave Remote Sensing Mode

The transient information like a ‘picture’ can be obtained by the traditional microwave remote sensing system. It will bring some shortcomings for detection of the moving targets and long-time monitoring of the variational scene over the region of interest. As a new imaging mode, more and more scholars and agencies have focused on the video Synthetic Aperture Radar (SAR) due to it can provide continuous surveillance over the region of interest. The spaceborne video SAR has the corresponding advantages over the spaceborne SAR image system and the optical video system. The working principles, imaging algorithm, and application method of spaceborne video SAR have been proposed in this chapter. First of all, a theoretical System of spaceborne video SAR has been constructed. The operation and application mode have also been defined. Some key performances have been discussed. To meet the demand for video SAR applications, one imaging algorithm has been proposed for dealing with the spaceborne video SAR data. Experiments on simulated data show that the algorithm was effective

A Study on Range Cell Migration Correction in SAR Imagery and MATLAB Implementation of Algorithms

Synthetic Aperture Radar(SAR) is an active microwave remote sensing technology that is used to create two-dimensional images of targets and the Earth surface through the use of radar [16]. SAR has many real time applications in different fields like as hydrology, geophysics, archeology etc. The term synthetic in the name comes from the concept of effectively creating a very long, narrow antenna by post-processing signal analysis rather than using a physical structure. This yields a much better resolution in the axis perpendicular to the radar beam(called the azimuth axis) effectively yielding images with quality normally only possible by using a much larger physical radar antenna. Goal of this thesis is to study and implementation of range doppler algorithm in MATLAB to extract out focused Single Look Complex (SLC) image that can be used for Automatic Target Recognition (ATR) and different techniques to correct range cell migration. The simulation results presented in this thesis are obtained from MATLAB environment where it is implemented a twodimension SAR target space as originally introduced by Brain Zaharris[22]. In this thesis, we have first implemented Range Doppler Algorithm(RDA) using synthetic data to get SLC image. Then RDA is used for the formation of SLC image from practical SAR data. In the simulation results, RDA has been implemented using SAR raw data that is collected from European Space Agency (ESA) via David Sandwell’s Data [13]. For focusing a moving target we need velocity compensation techniques. When the velocity of target is known by some other sources then range shifting methods will give good result for the focusing of moving target. However, this method will give good results only for a single moving target. For analysis of multiple moving target Keystone transformation (that is nothing but scaling of slow time parameter for uncoupling of fast frequency and slow time) will give better results. Keystone formatting [11] has the capability of compensating multiple targets range walk simultaneously without using any specific knowledge of the target motion, so it is widely used in the imaging of ground moving target[10] and dim target detection area [23].Therefore also, we have considered different relative velocity of targets with respect to SAR. Then range doppler matrix is formed and analyze the effect on moving target when velocity get increased

Recent Topics in Electromagnetic Compatibility

Recent Topics in Electromagnetic Compatability discusses several topics in electromagnetic compatibility (EMC) and electromagnetic interference (EMI), including measurements, shielding, emission, interference, biomedical devices, and numerical modeling. Over five sections, chapters address the electromagnetic spectrum of corona discharge, life cycle assessment of flexible electromagnetic shields, EMC requirements for implantable medical devices, analysis and design of absorbers for EMC applications, artificial surfaces, and media for EMC and EMI shielding, and much more

Generation of a combined dataset of simulated radar and electro-optical imagery

In the world of remote sensing there exist radar sensors and EO/IR sensors, both of which carry with them unique information useful to the imaging community. Radar has the capability of imaging through all types of weather, day or night. EO/IR produces radiance maps and frequently images at much finer resolution than radar. While each of these systems is valuable to imaging, there exists unknown territory in the imaging community as to the value added in combining the best of both these worlds. This work will begin to explore the challenges in simulating a scene in both a radar tool called Xpatch and an EO/IR tool called DIRSIG. The capabilities and limitations inherent to both radar and EO/IR are similar in the image simulation tools, so the work done in a simulated environment will carry over to the real-world environment as well. The synthetic data generated will be compared to existing measured data to demonstrate the validity of the experiment. Future work should explore registration and various types of fusion of the resulting images to demonstrate the synergistic value of the combined images