Hardware co-processor to enable MIMO in next generation wireless networks

One prevailing technology in wireless communication is Multiple Input, Multiple Output (MIMO) communication. MIMO communication simultaneously transmits several data streams, each from their own antenna within the same frequency channel. This technique can increase data bandwidth by up to a factor of the number of transmitting antennas, but comes with the cost of a much higher computational complexity for the wireless receiver. MIMO communication exploits differing channel effects caused by physical distances between antennas to differentiate between transmitting antennas, an intrinsically two dimensional operation. Current Digital Signal Processors (DSPs), on the other hand, are designed to perform computations on one dimensional vectors of incoming data. To compensate for the lack of native support of these higher dimensional operations, current base stations are forced to add multiple new processing elements while many mobile devices cannot support MIMO communication. In order to allow wireless clients and stations to have native support of the two dimensional operations required by MIMO communication, a hardware co-processor was designed to allow the DSP to offload these operations onto another processor to reduce computation time

Enhancing Electromagnetic Side-Channel Analysis in an Operational Environment

Side-channel attacks exploit the unintentional emissions from cryptographic devices to determine the secret encryption key. This research identifies methods to make attacks demonstrated in an academic environment more operationally relevant. Algebraic cryptanalysis is used to reconcile redundant information extracted from side-channel attacks on the AES key schedule. A novel thresholding technique is used to select key byte guesses for a satisfiability solver resulting in a 97.5% success rate despite failing for 100% of attacks using standard methods. Two techniques are developed to compensate for differences in emissions from training and test devices dramatically improving the effectiveness of cross device template attacks. Mean and variance normalization improves same part number attack success rates from 65.1% to 100%, and increases the number of locations an attack can be performed by 226%. When normalization is combined with a novel technique to identify and filter signals in collected traces not related to the encryption operation, the number of traces required to perform a successful attack is reduced by 85.8% on average. Finally, software-defined radios are shown to be an effective low-cost method for collecting side-channel emissions in real-time, eliminating the need to modify or profile the target encryption device to gain precise timing information

A configurable vector processor for accelerating speech coding algorithms

The growing demand for voice-over-packer (VoIP) services and multimedia-rich applications has made increasingly important the efficient, real-time implementation of low-bit rates speech coders on embedded VLSI platforms. Such speech coders are designed to substantially reduce the bandwidth requirements thus enabling dense multichannel gateways in small form factor. This however comes at a high computational cost which mandates the use of very high performance embedded processors. This thesis investigates the potential acceleration of two major ITU-T speech coding algorithms, namely G.729A and G.723.1, through their efficient implementation on a configurable extensible vector embedded CPU architecture. New scalar and vector ISAs were introduced which resulted in up to 80% reduction in the dynamic instruction count of both workloads. These instructions were subsequently encapsulated into a parametric, hybrid SISD (scalar processor)–SIMD (vector) processor. This work presents the research and implementation of the vector datapath of this vector coprocessor which is tightly-coupled to a Sparc-V8 compliant CPU, the optimization and simulation methodologies employed and the use of Electronic System Level (ESL) techniques to rapidly design SIMD datapaths