Towards a universal end effector : the design and development of production technology's intelligent robot hand : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Engineering and Automation at Massey University

Research into robot hands for industrial use began in the early 1980s and there are now many examples of robot hands in existence. The reason for research into robot hands is that standard robot end effectors have to be designed for each application and are therefore costly. A universal end effector is needed that will be able to perform any parts handling operation or use other tools for other industrial operations. Existing robot hand research would therefore benefit from new concepts, designs and control systems. The Department of Production Technology is developing an intelligent robot hand of a novel configuration, with the ultimate aim of producing a universal end effector. The concept of PTIRH (Production Technology's Intelligent Robot Hand) is that it is a multi-fingered manipulator with a configuration of two thumbs and two fingers. Research by the author for this thesis concentrated on five major areas. First, the background research into the state of the art in robot hand research. Second, the initiation, development and analysis of the novel configuration concept of PTIRH. Third, specification, testing and analysis of air muscle actuation, including design, development and testing of a servo pneumatic control valve for the air muscles. Fourth, choice of sensors for the robot hand, including testing and analysis of two custom made air pressure sensors. Fifth, definition, design, construction, development, testing and analysis of the mechanical structure for an early prototype of PTIRH. Development of an intelligent controller for PTIRH was outside the scope of the author's research. The results of the analysis on the air muscles showed that they could be a suitable direct drive actuator for an intelligent robotic hand. The force, pressure and position sensor results indicate that the sensors could form the basis of the feedback loop for an intelligent controller. The configuration of PTIRH enables it to grasp objects with little reliance on friction. This was demonstrated with an early prototype of the robot hand, which had one finger with actuation and three other static digits, by successfully manually arranging the digits into stable grasps of various objects

A finger mechanism for adaptive end effectors

This paper presents design and analysis of a rigid link finger, which may be suitable for a number of adaptive end effectors. The design has evolved from an industrial need for a tele-operated system to be used in nuclear environments. The end effector is designed to assist repair work in nuclear reactors during retrieval operation, particularly for the purpose of grasping objects of various shape, size and mass. The work is based on the University of Southampton's Whole Arm Manipulator, which has a special design consideration for safety and flexibility. The paper discusses kinematic issues associated with the finger design, and to the end of the paper specifies the limits of finger operating parameters for implementing control law

Ground Robotic Hand Applications for the Space Program study (GRASP)

This document reports on a NASA-STDP effort to address research interests of the NASA Kennedy Space Center (KSC) through a study entitled, Ground Robotic-Hand Applications for the Space Program (GRASP). The primary objective of the GRASP study was to identify beneficial applications of specialized end-effectors and robotic hand devices for automating any ground operations which are performed at the Kennedy Space Center. Thus, operations for expendable vehicles, the Space Shuttle and its components, and all payloads were included in the study. Typical benefits of automating operations, or augmenting human operators performing physical tasks, include: reduced costs; enhanced safety and reliability; and reduced processing turnaround time

Design and control of a multi-fingered robot hand provided with tactile feedback

The design, construction, control and application of a three fingered robot hand with nine degrees of freedom and built-in multi-component force sensors is described. The adopted gripper kinematics are justified and optimized with respect to grasping and manipulation flexibility. The hand was constructed with miniature motor drive systems imbedded into the fingers. The control is hierarchically structured and is implemented on a simple PC-AT computer. The hand's dexterity and intelligence are demonstrated with some experiments

Concept for a large master/slave-controlled robotic hand

A strategy is presented for the design and construction of a large master/slave-controlled, five-finger robotic hand. Each of the five fingers will possess four independent axes each driven by a brushless DC servomotor and, thus, four degrees-of-freedom. It is proposed that commercially available components be utilized as much as possible to fabricate a working laboratory model of the device with an anticipated overall length of two-to-four feet (0.6 to 1.2 m). The fingers are to be designed so that proximity, tactile, or force/torque sensors can be imbedded in their structure. In order to provide for the simultaneous control of the twenty independent hand joints, a multilevel master/slave control strategy is proposed in which the operator wears a specially instrumented glove which produces control signals corresponding to the finger configurations and which is capable of conveying sensor feedback signals to the operator. Two dexterous hand master devices are currently commercially available for this application with both undergoing continuing development. A third approach to be investigated for the master control mode is the use of real-time image processing of a specially patterned master glove to provide the respective control signals for positioning the multiple finger joints

Grasping and Control Issues in Adaptive End Effectors

Research into robotic grasping and manipulation has led to the development of a large number of tendon based end effectors. Many are, however, developed as a research tool, which are limited in application to the laboratory environment. The main reason being that the designs requiring a large number of actuators to be controlled. Due to the space and safety requirements, very few have been developed and commissioned for industrial applications. This paper presents design of a rigid link finger operated by a minimum number of actuators, which may be suitable for a number of adaptive end effectors. The adaptive nature built into the end effector (due to limited number of actuators) presents considerable problems in grasping and control. The paper discusses the issues associated with such designs. The research can be applicable to any adaptive end effectors that are controlled by limited number of actuators and evaluates their suitability in industrial environments

Flight telerobot mechanism design: Problems and challenges

Problems and challenges of designing flight telerobot mechanisms are discussed. Specific experiences are drawn from the following system developments: (1) the Force Reflecting Hand Controller, (2) the Smart End Effector, (3) the force-torque sensor, and a generic multi-degrees-of-freedom manipulator

Towards Developing Gripper to obtain Dexterous Manipulation

Artificial hands or grippers are essential elements in many robotic systems, such as, humanoid, industry, social robot, space robot, mobile robot, surgery and so on. As humans, we use our hands in different ways and can perform various maneuvers such as writing, altering posture of an object in-hand without having difficulties. Most of our daily activities are dependent on the prehensile and non-prehensile capabilities of our hand. Therefore, the human hand is the central motivation of grasping and manipulation, and has been explicitly studied from many perspectives such as, from the design of complex actuation, synergy, use of soft material, sensors, etc; however to obtain the adaptability to a plurality of objects along with the capabilities of in-hand manipulation of our hand in a grasping device is not easy, and not fully evaluated by any developed gripper. Industrial researchers primarily use rigid materials and heavy actuators in the design for repeatability, reliability to meet dexterity, precision, time requirements where the required flexibility to manipulate object in-hand is typically absent. On the other hand, anthropomorphic hands are generally developed by soft materials. However they are not deployed for manipulation mainly due to the presence of numerous sensors and consequent control complexity of under-actuated mechanisms that significantly reduce speed and time requirements of industrial demand. Hence, developing artificial hands or grippers with prehensile capabilities and dexterity similar to human like hands is challenging, and it urges combined contributions from multiple disciplines such as, kinematics, dynamics, control, machine learning and so on. Therefore, capabilities of artificial hands in general have been constrained to some specific tasks according to their target applications, such as grasping (in biomimetic hands) or speed/precision in a pick and place (in industrial grippers). Robotic grippers developed during last decades are mostly aimed to solve grasping complexities of several objects as their primary objective. However, due to the increasing demands of industries, many issues are rising and remain unsolved such as in-hand manipulation and placing object with appropriate posture. Operations like twisting, altering orientation of object within-hand, require significant dexterity of the gripper that must be achieved from a compact mechanical design at the first place. Along with manipulation, speed is also required in many robotic applications. Therefore, for the available speed and design simplicity, nonprehensile or dynamic manipulation is widely exploited. The nonprehensile approach however, does not focus on stable grasping in general. Also, nonprehensile or dynamic manipulation often exceeds robot\u2019s kinematic workspace, which additionally urges installation of high speed feedback and robust control. Hence, these approaches are inapplicable especially when, the requirements are grasp oriented such as, precise posture change of a payload in-hand, placing payload afterward according to a strict final configuration. Also, addressing critical payload such as egg, contacts (between gripper and egg) cannot be broken completely during manipulation. Moreover, theoretical analysis, such as contact kinematics, grasp stability cannot predict the nonholonomic behaviors, and therefore, uncertainties are always present to restrict a maneuver, even though the gripper is capable of doing the task. From a technical point of view, in-hand manipulation or within-hand dexterity of a gripper significantly isolates grasping and manipulation skills from the dependencies on contact type, a priory knowledge of object model, configurations such as initial or final postures and also additional environmental constraints like disturbance, that may causes breaking of contacts between object and finger. Hence, the property (in-hand manipulation) is important for a gripper in order to obtain human hand skill. In this research, these problems (to obtain speed, flexibility to a plurality of grasps, within-hand dexterity in a single gripper) have been tackled in a novel way. A gripper platform named Dexclar (DEXterous reConfigurable moduLAR) has been developed in order to study in-hand manipulation, and a generic spherical payload has been considered at the first place. Dexclar is mechanism-centric and it exploits modularity and reconfigurability to the aim of achieving within-hand dexterity rather than utilizing soft materials. And hence, precision, speed are also achievable from the platform. The platform can perform several grasps (pinching, form closure, force closure) and address a very important issue of releasing payload with final posture/ configuration after manipulation. By exploiting 16 degrees of freedom (DoF), Dexclar is capable to provide 6 DoF motions to a generic spherical or ellipsoidal payload. And since a mechanism is reliable, repeatable once it has been properly synthesized, precision and speed are also obtainable from them. Hence Dexclar is an ideal starting point to study within-hand dexterity from kinematic point of view. As the final aim is to develop specific grippers (having the above capabilities) by exploiting Dexclar, a highly dexterous but simply constructed reconfigurable platform named VARO-fi (VARiable Orientable fingers with translation) is proposed, which can be used as an industrial end-effector, as well as an alternative of bio-inspired gripper in many robotic applications. The robust four fingered VARO-fi addresses grasp, in-hand manipulation and release (payload with desired configuration) of plurality of payloads, as demonstrated in this thesis. Last but not the least, several tools and end-effectors have been constructed to study prehensile and non-prehensile manipulation, thanks to Bayer Robotic challenge 2017, where the feasibility and their potentiality to use them in an industrial environment have been validated. The above mentioned research will enhance a new dimension for designing grippers with the properties of dexterity and flexibility at the same time, without explicit theoretical analysis, algorithms, as those are difficult to implement and sometime not feasible for real system

A novel design process of low cost 3D printed ambidextrous finger designed for an ambidextrous robotic hand

This paper presents the novel mechanical design of an ambidextrous finger specifically designed for an ambidextrous anthropomorphic robotic hand actuated by pneumatic artificial muscles. The ambidextrous nature of design allows fingers to perform both left and right hand movements. The aim of our design is to reduce the number of actuators, increase the range of movements with best possible range ideally greater than a common human finger. Four prototypes are discussed in this paper; first prototype is focused on the choice of material and to consider the possible ways to reduce friction. Second prototype is designed to investigate the tendons routing configurations. Aim of third and fourth prototype is to improve the overall performance and to maximize the grasping force. Finally, a unified design (Final design) is presented in great detail. Comparison of all prototypes is done from different angles to evaluate the best design. The kinematic features of intermediate mode have been analysed to optimize both the flexibility and the robustness of the system, as well as to minimize the number of pneumatic muscles. The final design of an ambidextrous finger has developed, tested and 3D printed