PACE: Simple Multi-hop Scheduling for Single-radio 802.11-based Stub Wireless Mesh Networks

IEEE 802.11-based Stub Wireless Mesh Networks (WMNs) are a cost-effective and flexible solution to extend wired network infrastructures. Yet, they suffer from two major problems: inefficiency and unfairness. A number of approaches have been proposed to tackle these problems, but they are too restrictive, highly complex, or require time synchronization and modifications to the IEEE 802.11 MAC. PACE is a simple multi-hop scheduling mechanism for Stub WMNs overlaid on the IEEE 802.11 MAC that jointly addresses the inefficiency and unfairness problems. It limits transmissions to a single mesh node at each time and ensures that each node has the opportunity to transmit a packet in each network-wide transmission round. Simulation results demonstrate that PACE can achieve optimal network capacity utilization and greatly outperforms state of the art CSMA/CA-based solutions as far as goodput, delay, and fairness are concerned

Scheduling for next generation WLANs: filling the gap between offered and observed data rates

In wireless networks, opportunistic scheduling is used to increase system throughput by exploiting multi-user diversity. Although recent advances have increased physical layer data rates supported in wireless local area networks (WLANs), actual throughput realized are significantly lower due to overhead. Accordingly, the frame aggregation concept is used in next generation WLANs to improve efficiency. However, with frame aggregation, traditional opportunistic schemes are no longer optimal. In this paper, we propose schedulers that take queue and channel conditions into account jointly, to maximize throughput observed at the users for next generation WLANs. We also extend this work to design two schedulers that perform block scheduling for maximizing network throughput over multiple transmission sequences. For these schedulers, which make decisions over long time durations, we model the system using queueing theory and determine users' temporal access proportions according to this model. Through detailed simulations, we show that all our proposed algorithms offer significant throughput improvement, better fairness, and much lower delay compared with traditional opportunistic schedulers, facilitating the practical use of the evolving standard for next generation wireless networks

Mixing Properties of CSMA Networks on Partite Graphs

We consider a stylized stochastic model for a wireless CSMA network. Experimental results in prior studies indicate that the model provides remarkably accurate throughput estimates for IEEE 802.11 systems. In particular, the model offers an explanation for the severe spatial unfairness in throughputs observed in such networks with asymmetric interference conditions. Even in symmetric scenarios, however, it may take a long time for the activity process to move between dominant states, giving rise to potential starvation issues. In order to gain insight in the transient throughput characteristics and associated starvation effects, we examine in the present paper the behavior of the transition time between dominant activity states. We focus on partite interference graphs, and establish how the magnitude of the transition time scales with the activation rate and the sizes of the various network components. We also prove that in several cases the scaled transition time has an asymptotically exponential distribution as the activation rate grows large, and point out interesting connections with related exponentiality results for rare events and meta-stability phenomena in statistical physics. In addition, we investigate the convergence rate to equilibrium of the activity process in terms of mixing times.Comment: Valuetools, 6th International Conference on Performance Evaluation Methodologies and Tools, October 9-12, 2012, Carg\`ese, Franc

Max-min Fairness in 802.11 Mesh Networks

In this paper we build upon the recent observation that the 802.11 rate region is log-convex and, for the first time, characterise max-min fair rate allocations for a large class of 802.11 wireless mesh networks. By exploiting features of the 802.11e/n MAC, in particular TXOP packet bursting, we are able to use this characterisation to establish a straightforward, practically implementable approach for achieving max-min throughput fairness. We demonstrate that this approach can be readily extended to encompass time-based fairness in multi-rate 802.11 mesh networks

Risk-Informed Interference Assessment for Shared Spectrum Bands: A Wi-Fi/LTE Coexistence Case Study

Interference evaluation is crucial when deciding whether and how wireless technologies should operate. In this paper we demonstrate the benefit of risk-informed interference assessment to aid spectrum regulators in making decisions, and to readily convey engineering insight. Our contributions are: we apply, for the first time, risk assessment to a problem of inter-technology spectrum sharing, i.e. Wi-Fi/LTE in the 5 GHz unlicensed band, and we demonstrate that this method comprehensively quantifies the interference impact. We perform simulations with our newly publicly-available tool and we consider throughput degradation and fairness metrics to assess the risk for different network densities, numbers of channels, and deployment scenarios. Our results show that no regulatory intervention is needed to ensure harmonious technical Wi-Fi/LTE coexistence: for the typically large number of channels available in the 5 GHz band, the risk for Wi-Fi from LTE is negligible, rendering policy and engineering concerns largely moot. As an engineering insight, Wi-Fi coexists better with itself in dense, but better with LTE, in sparse deployments. Also, both main LTE-in-unlicensed variants coexist well with Wi-Fi in general. For LTE intra-technology inter-operator coexistence, both variants typically coexist well in the 5 GHz band, but for dense deployments, implementing listen-before-talk causes less interference

A survey of performance enhancement of transmission control protocol (TCP) in wireless ad hoc networks

This Article is provided by the Brunel Open Access Publishing Fund - Copyright @ 2011 Springer OpenTransmission control protocol (TCP), which provides reliable end-to-end data delivery, performs well in traditional wired network environments, while in wireless ad hoc networks, it does not perform well. Compared to wired networks, wireless ad hoc networks have some specific characteristics such as node mobility and a shared medium. Owing to these specific characteristics of wireless ad hoc networks, TCP faces particular problems with, for example, route failure, channel contention and high bit error rates. These factors are responsible for the performance degradation of TCP in wireless ad hoc networks. The research community has produced a wide range of proposals to improve the performance of TCP in wireless ad hoc networks. This article presents a survey of these proposals (approaches). A classification of TCP improvement proposals for wireless ad hoc networks is presented, which makes it easy to compare the proposals falling under the same category. Tables which summarize the approaches for quick overview are provided. Possible directions for further improvements in this area are suggested in the conclusions. The aim of the article is to enable the reader to quickly acquire an overview of the state of TCP in wireless ad hoc networks.This study is partly funded by Kohat University of Science & Technology (KUST), Pakistan, and the Higher Education Commission, Pakistan

A Clean-Slate Architecture for Reliable Data Delivery in Wireless Mesh Networks

In this paper, we introduce a clean-slate architecture for improving the delivery of data packets in IEEE 802.11 wireless mesh networks. Opposed to the rigid TCP/IP layer architecture which exhibits serious deficiencies in such networks, we propose a unitary layer approach that combines both routing and transport functionalities in a single layer. The new Mesh Transmission Layer (MTL) incorporates cross-interacting routing and transport modules for a reliable data delivery based on the loss probabilities of wireless links. Due to the significant drawbacks of standard TCP over IEEE 802.11, we particularly focus on the transport module, proposing a pure rate-based approach for transmitting data packets according to the current contention in the network. By considering the IEEE 802.11 spatial reuse constraint and employing a novel acknowledgment scheme, the new transport module improves both goodput and fairness in wireless mesh networks. In a comparative performance study, we show that MTL achieves up to 48% more goodput and up to 100% less packet drops than TCP/IP, while maintaining excellent fairness results