5,648 research outputs found
Spatial Separation of Closely-Spaced Users in Measured Massive Multi-User MIMO Channels
Fully-synchronous measurements of a massive multi-user multiple-input multiple-output (MU-MIMO) radio propagation channel are presented. We evaluate the ability of a massive MIMO system to spatially separate users located close to each other in line-of-sight (LOS) propagation conditions. The system consists of a base-station (BS) antenna array equipped with 64 dual-polarized antenna elements (128 ports) arranged in a cylindrical configuration, and eight single-antenna users. The users are confined to a five-meter diameter circle and move randomly at pedestrian speeds. The BS antenna array is located on top of a 20 m tall building and has LOS to the users. We examine user separability by studying singular value spread of the MU-MIMO channel matrix for several subsets of BS antenna array ports, along with sum-rate capacity and achievable sum-rates with both zero-forcing and matched-filtering linear precoders. We also analyze the performance of the user with the lowest rate. Finally, a comparison between the performance offered by the massive MIMO system and that of a conventional MU-MIMO system is provided. To the best of our knowledge, this is the first report of fully-synchronous dynamic measurements of a massive MIMO system. Our investigation shows that even users located close to each other in LOS propagation conditions can be spatially separated in a massive MIMO system
Massive MIMO performance evaluation based on measured propagation data
Massive MIMO, also known as very-large MIMO or large-scale antenna systems,
is a new technique that potentially can offer large network capacities in
multi-user scenarios. With a massive MIMO system, we consider the case where a
base station equipped with a large number of antenna elements simultaneously
serves multiple single-antenna users in the same time-frequency resource. So
far, investigations are mostly based on theoretical channels with independent
and identically distributed (i.i.d.) complex Gaussian coefficients, i.e.,
i.i.d. Rayleigh channels. Here, we investigate how massive MIMO performs in
channels measured in real propagation environments. Channel measurements were
performed at 2.6 GHz using a virtual uniform linear array (ULA) which has a
physically large aperture, and a practical uniform cylindrical array (UCA)
which is more compact in size, both having 128 antenna ports. Based on
measurement data, we illustrate channel behavior of massive MIMO in three
representative propagation conditions, and evaluate the corresponding
performance. The investigation shows that the measured channels, for both array
types, allow us to achieve performance close to that in i.i.d. Rayleigh
channels. It is concluded that in real propagation environments we have
characteristics that can allow for efficient use of massive MIMO, i.e., the
theoretical advantages of this new technology can also be harvested in real
channels.Comment: IEEE Transactions on Wireless Communications, 201
Hybrid Beamforming via the Kronecker Decomposition for the Millimeter-Wave Massive MIMO Systems
Despite its promising performance gain, the realization of mmWave massive
MIMO still faces several practical challenges. In particular, implementing
massive MIMO in the digital domain requires hundreds of RF chains matching the
number of antennas. Furthermore, designing these components to operate at the
mmWave frequencies is challenging and costly. These motivated the recent
development of hybrid-beamforming where MIMO processing is divided for separate
implementation in the analog and digital domains, called the analog and digital
beamforming, respectively. Analog beamforming using a phase array introduces
uni-modulus constraints on the beamforming coefficients, rendering the
conventional MIMO techniques unsuitable and call for new designs. In this
paper, we present a systematic design framework for hybrid beamforming for
multi-cell multiuser massive MIMO systems over mmWave channels characterized by
sparse propagation paths. The framework relies on the decomposition of analog
beamforming vectors and path observation vectors into Kronecker products of
factors being uni-modulus vectors. Exploiting properties of Kronecker mixed
products, different factors of the analog beamformer are designed for either
nulling interference paths or coherently combining data paths. Furthermore, a
channel estimation scheme is designed for enabling the proposed hybrid
beamforming. The scheme estimates the AoA of data and interference paths by
analog beam scanning and data-path gains by analog beam steering. The
performance of the channel estimation scheme is analyzed. In particular, the
AoA spectrum resulting from beam scanning, which displays the magnitude
distribution of paths over the AoA range, is derived in closed-form. It is
shown that the inter-cell interference level diminishes inversely with the
array size, the square root of pilot sequence length and the spatial separation
between paths.Comment: Submitted to IEEE JSAC Special Issue on Millimeter Wave
Communications for Future Mobile Networks, minor revisio
A Generalized Framework on Beamformer Design and CSI Acquisition for Single-Carrier Massive MIMO Systems in Millimeter Wave Channels
In this paper, we establish a general framework on the reduced dimensional
channel state information (CSI) estimation and pre-beamformer design for
frequency-selective massive multiple-input multiple-output MIMO systems
employing single-carrier (SC) modulation in time division duplex (TDD) mode by
exploiting the joint angle-delay domain channel sparsity in millimeter (mm)
wave frequencies. First, based on a generic subspace projection taking the
joint angle-delay power profile and user-grouping into account, the reduced
rank minimum mean square error (RR-MMSE) instantaneous CSI estimator is derived
for spatially correlated wideband MIMO channels. Second, the statistical
pre-beamformer design is considered for frequency-selective SC massive MIMO
channels. We examine the dimension reduction problem and subspace (beamspace)
construction on which the RR-MMSE estimation can be realized as accurately as
possible. Finally, a spatio-temporal domain correlator type reduced rank
channel estimator, as an approximation of the RR-MMSE estimate, is obtained by
carrying out least square (LS) estimation in a proper reduced dimensional
beamspace. It is observed that the proposed techniques show remarkable
robustness to the pilot interference (or contamination) with a significant
reduction in pilot overhead
Channel correlation-based approach for feedback overhead reduction in massive MIMO
For frequency-division duplex multiple-input-multiple-output (MIMO) systems, the channel state information at the transmitter is usually obtained by sending pilots or reference signals from all elements of the antenna array. The channel is then estimated by the receiver and communicated back to the transmitter. However, for massive MIMO, this periodical estimation of the full transfer matrix can lead to prohibitive overhead. To reduce the amount of data, we propose to estimate the updated channel matrix from the knowledge of the full correlation matrix at the transmitter made during some initialization time and the instantaneous measured channel matrix of smaller size, characterizing the link between the user and a limited number of reference array elements. The proposed algorithm is validated with measured massive MIMO channel transfer functions at 3.5GHz between a uniform rectangular array and different user positions. Since measurements were made in static conditions, the criteria chosen for evaluating the performance of the algorithm are based on a comparison of the predicted channel capacity calculated from either the measured or estimated channel matrix
A Novel Millimeter-Wave Channel Simulator and Applications for 5G Wireless Communications
This paper presents details and applications of a novel channel simulation
software named NYUSIM, which can be used to generate realistic temporal and
spatial channel responses to support realistic physical- and link-layer
simulations and design for fifth-generation (5G) cellular communications.
NYUSIM is built upon the statistical spatial channel model for broadband
millimeter-wave (mmWave) wireless communication systems developed by
researchers at New York University (NYU). The simulator is applicable for a
wide range of carrier frequencies (500 MHz to 100 GHz), radio frequency (RF)
bandwidths (0 to 800 MHz), antenna beamwidths (7 to 360 degrees for azimuth and
7 to 45 degrees for elevation), and operating scenarios (urban microcell, urban
macrocell, and rural macrocell), and also incorporates multiple-input
multiple-output (MIMO) antenna arrays at the transmitter and receiver. This
paper also provides examples to demonstrate how to use NYUSIM for analyzing
MIMO channel conditions and spectral efficiencies, which show that NYUSIM is an
alternative and more realistic channel model compared to the 3rd Generation
Partnership Project (3GPP) and other channel models for mmWave bands.Comment: 7 pages, 8 figures, in 2017 IEEE International Conference on
Communications (ICC), Paris, May 201
- …