Programming Languages for Distributed Computing Systems

When distributed systems first appeared, they were programmed in traditional sequential languages, usually with the addition of a few library procedures for sending and receiving messages. As distributed applications became more commonplace and more sophisticated, this ad hoc approach became less satisfactory. Researchers all over the world began designing new programming languages specifically for implementing distributed applications. These languages and their history, their underlying principles, their design, and their use are the subject of this paper. We begin by giving our view of what a distributed system is, illustrating with examples to avoid confusion on this important and controversial point. We then describe the three main characteristics that distinguish distributed programming languages from traditional sequential languages, namely, how they deal with parallelism, communication, and partial failures. Finally, we discuss 15 representative distributed languages to give the flavor of each. These examples include languages based on message passing, rendezvous, remote procedure call, objects, and atomic transactions, as well as functional languages, logic languages, and distributed data structure languages. The paper concludes with a comprehensive bibliography listing over 200 papers on nearly 100 distributed programming languages

Pattern operators for grid

The definition and programming of distributed applications has become a major research issue due to the increasing availability of (large scale) distributed platforms and the requirements posed by the economical globalization. However, such a task requires a huge effort due to the complexity of the distributed environments: large amount of users may communicate and share information across different authority domains; moreover, the “execution environment” or “computations” are dynamic since the number of users and the computational infrastructure change in time. Grid environments, in particular, promise to be an answer to deal with such complexity, by providing high performance execution support to large amount of users, and resource sharing across different organizations. Nevertheless, programming in Grid environments is still a difficult task. There is a lack of high level programming paradigms and support tools that may guide the application developer and allow reusability of state-of-the-art solutions. Specifically, the main goal of the work presented in this thesis is to contribute to the simplification of the development cycle of applications for Grid environments by bringing structure and flexibility to three stages of that cycle through a commonmodel. The stages are: the design phase, the execution phase, and the reconfiguration phase. The common model is based on the manipulation of patterns through pattern operators, and the division of both patterns and operators into two categories, namely structural and behavioural. Moreover, both structural and behavioural patterns are first class entities at each of the aforesaid stages. At the design phase, patterns can be manipulated like other first class entities such as components. This allows a more structured way to build applications by reusing and composing state-of-the-art patterns. At the execution phase, patterns are units of execution control: it is possible, for example, to start or stop and to resume the execution of a pattern as a single entity. At the reconfiguration phase, patterns can also be manipulated as single entities with the additional advantage that it is possible to perform a structural reconfiguration while keeping some of the behavioural constraints, and vice-versa. For example, it is possible to replace a behavioural pattern, which was applied to some structural pattern, with another behavioural pattern. In this thesis, besides the proposal of the methodology for distributed application development, as sketched above, a definition of a relevant set of pattern operators was made. The methodology and the expressivity of the pattern operators were assessed through the development of several representative distributed applications. To support this validation, a prototype was designed and implemented, encompassing some relevant patterns and a significant part of the patterns operators defined. This prototype was based in the Triana environment; Triana supports the development and deployment of distributed applications in the Grid through a dataflow-based programming model. Additionally, this thesis also presents the analysis of a mapping of some operators for execution control onto the Distributed Resource Management Application API (DRMAA). This assessment confirmed the suitability of the proposed model, as well as the generality and flexibility of the defined pattern operatorsDepartamento de Informática and Faculdade de Ciências e Tecnologia of the Universidade Nova de Lisboa; Centro de Informática e Tecnologias da Informação of the FCT/UNL; Reitoria da Universidade Nova de Lisboa; Distributed Collaborative Computing Group, Cardiff University, United Kingdom; Fundação para a Ciência e Tecnologia; Instituto de Cooperação Científica e Tecnológica Internacional; French Embassy in Portugal; European Union Commission through the Agentcities.NET and Coordina projects; and the European Science Foundation, EURESCO

Pattern Operators for Grid Environments

The definition and programming of distributed applications has become a major research issue due to the increasing availability of (large scale) distributed platforms and the requirements posed by the economical globalization. However, such a task requires a huge effort due to the complexity of the distributed environments: large amount of users may communicate and share information across different authority domains; moreover, the “execution environment” or “computations” are dynamic since the number of users and the computational infrastructure change in time. Grid environments, in particular, promise to be an answer to deal with such complexity, by providing high performance execution support to large amount of users, and resource sharing across different organizations. Nevertheless, programming in Grid environments is still a difficult task. There is a lack of high level programming paradigms and support tools that may guide the application developer and allow reusability of state-of-the-art solutions. Specifically, the main goal of the work presented in this thesis is to contribute to the simplification of the development cycle of applications for Grid environments by bringing structure and flexibility to three stages of that cycle through a commonmodel. The stages are: the design phase, the execution phase, and the reconfiguration phase. The common model is based on the manipulation of patterns through pattern operators, and the division of both patterns and operators into two categories, namely structural and behavioural. Moreover, both structural and behavioural patterns are first class entities at each of the aforesaid stages. At the design phase, patterns can be manipulated like other first class entities such as components. This allows a more structured way to build applications by reusing and composing state-of-the-art patterns. At the execution phase, patterns are units of execution control: it is possible, for example, to start or stop and to resume the execution of a pattern as a single entity. At the reconfiguration phase, patterns can also be manipulated as single entities with the additional advantage that it is possible to perform a structural reconfiguration while keeping some of the behavioural constraints, and vice-versa. For example, it is possible to replace a behavioural pattern, which was applied to some structural pattern, with another behavioural pattern. In this thesis, besides the proposal of the methodology for distributed application development, as sketched above, a definition of a relevant set of pattern operators was made. The methodology and the expressivity of the pattern operators were assessed through the development of several representative distributed applications. To support this validation, a prototype was designed and implemented, encompassing some relevant patterns and a significant part of the patterns operators defined. This prototype was based in the Triana environment; Triana supports the development and deployment of distributed applications in the Grid through a dataflow-based programming model. Additionally, this thesis also presents the analysis of a mapping of some operators for execution control onto the Distributed Resource Management Application API (DRMAA). This assessment confirmed the suitability of the proposed model, as well as the generality and flexibility of the defined pattern operatorsDepartamento de Informática and Faculdade de Ciências e Tecnologia of the Universidade Nova de Lisboa; Centro de Informática e Tecnologias da Informação of the FCT/UNL; Reitoria da Universidade Nova de Lisboa; Distributed Collaborative Computing Group, Cardiff University, United Kingdom; Fundação para a Ciência e Tecnologia; Instituto de Cooperação Científica e Tecnológica Internacional; French Embassy in Portugal; European Union Commission through the Agentcities.NET and Coordina projects; and the European Science Foundation, EURESCO

Parallel Patterns for Adaptive Data Stream Processing

In recent years our ability to produce information has been growing steadily, driven by an ever increasing computing power, communication rates, hardware and software sensors diffusion. This data is often available in the form of continuous streams and the ability to gather and analyze it to extract insights and detect patterns is a valuable opportunity for many businesses and scientific applications. The topic of Data Stream Processing (DaSP) is a recent and highly active research area dealing with the processing of this streaming data. The development of DaSP applications poses several challenges, from efficient algorithms for the computation to programming and runtime systems to support their execution. In this thesis two main problems will be tackled: * need for high performance: high throughput and low latency are critical requirements for DaSP problems. Applications necessitate taking advantage of parallel hardware and distributed systems, such as multi/manycores or cluster of multicores, in an effective way; * dynamicity: due to their long running nature (24hr/7d), DaSP applications are affected by highly variable arrival rates and changes in their workload characteristics. Adaptivity is a fundamental feature in this context: applications must be able to autonomously scale the used resources to accommodate dynamic requirements and workload while maintaining the desired Quality of Service (QoS) in a cost-effective manner. In the current approaches to the development of DaSP applications are still missing efficient exploitation of intra-operator parallelism as well as adaptations strategies with well known properties of stability, QoS assurance and cost awareness. These are the gaps that this research work tries to fill, resorting to well know approaches such as Structured Parallel Programming and Control Theoretic models. The dissertation runs along these two directions. The first part deals with intra-operator parallelism. A DaSP application can be naturally expressed as a set of operators (i.e. intermediate computations) that cooperate to reach a common goal. If QoS requirements are not met by the current implementation, bottleneck operators must be internally parallelized. We will study recurrent computations in window based stateful operators and propose patterns for their parallel implementation. Windowed operators are the most representative class of stateful data stream operators. Here computations are applied on the most recent received data. Windows are dynamic data structures: they evolve over time in terms of content and, possibly, size. Therefore, with respect to traditional patterns, the DaSP domain requires proper specializations and enhanced features concerning data distribution and management policies for different windowing methods. A structured approach to the problem will reduce the effort and complexity of parallel programming. In addition, it simplifies the reasoning about the performance properties of a parallel solution (e.g. throughput and latency). The proposed patterns exhibit different properties in terms of applicability and profitability that will be discussed and experimentally evaluated. The second part of the thesis is devoted to the proposal and study of predictive strategies and reconfiguration mechanisms for autonomic DaSP operators. Reconfiguration activities can be implemented in a transparent way to the application programmer thanks to the exploitation of parallel paradigms with well known structures. Furthermore, adaptation strategies may take advantage of the QoS predictability of the used parallel solution. Autonomous operators will be driven by means of a Model Predictive Control approach, with the intent of giving QoS assurances in terms of throughput or latency in a resource-aware manner. An experimental section will show the effectiveness of the proposed approach in terms of execution costs reduction as well as the stability degree of a system reconfiguration. The experiments will target shared and distributed memory architectures