1,985 research outputs found
Fog-supported delay-constrained energy-saving live migration of VMs over multiPath TCP/IP 5G connections
The incoming era of the fifth-generation fog computing-supported radio access networks (shortly, 5G FOGRANs) aims at exploiting computing/networking resource virtualization, in order to augment the limited resources of wireless devices through the seamless live migration of virtual machines (VMs) toward nearby fog data centers. For this purpose, the bandwidths of the multiple wireless network interface cards of the wireless devices may be aggregated under the control of the emerging MultiPathTCP (MPTCP) protocol. However, due to the fading and mobility-induced phenomena, the energy consumptions of the current state-of-the-art VM migration techniques may still offset their expected benefits. Motivated by these considerations, in this paper, we analytically characterize and implement in software and numerically test the optimal minimum-energy settable-complexity bandwidth manager (SCBM) for the live migration of VMs over 5G FOGRAN MPTCP connections. The key features of the proposed SCBM are that: 1) its implementation complexity is settable on-line on the basis of the target energy consumption versus implementation complexity tradeoff; 2) it minimizes the network energy consumed by the wireless device for sustaining the migration process under hard constraints on the tolerated migration times and downtimes; and 3) by leveraging a suitably designed adaptive mechanism, it is capable to quickly react to (possibly, unpredicted) fading and/or mobility-induced abrupt changes of the wireless environment without requiring forecasting. The actual effectiveness of the proposed SCBM is supported by extensive energy versus delay performance comparisons that cover: 1) a number of heterogeneous 3G/4G/WiFi FOGRAN scenarios; 2) synthetic and real-world workloads; and, 3) MPTCP and wireless connections
Towards a context aware multipath-TCP
Multi-homing has become ubiquitous in the mobile domain. Despite this, mobile devices are not yet capable of fully realizing the potential of the increasing variety and availability of network resources. Multipath-TCP (MPTCP) is one of the most prominent technologies for multi-homed mobile devices, that is able to effectively tackle both resource pooling and mobility. Despite the success of MPTCP we believe that the implementation can be enhanced for the mobile domain, by increasing the granularity of control a device has over how its network interfaces are used. In this paper we present and evaluate MPTCP - Context Aware (MPTCP-CA), which introduces a policy oriented approach to the management and control of MPTCP connections. Our evaluation demonstrates three use cases that leverage context awareness to improve the utilization of multiple network interfaces with respect to the users requirements
Seamless Multimedia Delivery Within a Heterogeneous Wireless Networks Environment: Are We There Yet?
The increasing popularity of live video streaming from mobile devices, such as Facebook Live, Instagram Stories, Snapchat, etc. pressurizes the network operators to increase the capacity of their networks. However, a simple increase in system capacity will not be enough without considering the provisioning of quality of experience (QoE) as the basis for network control, customer loyalty, and retention rate and thus increase in network operators revenue. As QoE is gaining strong momentum especially with increasing users' quality expectations, the focus is now on proposing innovative solutions to enable QoE when delivering video content over heterogeneous wireless networks. In this context, this paper presents an overview of multimedia delivery solutions, identifies the problems and provides a comprehensive classification of related state-of-the-art approaches following three key directions: 1) adaptation; 2) energy efficiency; and 3) multipath content delivery. Discussions, challenges, and open issues on the seamless multimedia provisioning faced by the current and next generation of wireless networks are also provided
Seamless multimedia delivery within a heterogeneous wireless networks environment: are we there yet?
The increasing popularity of live video streaming from mobile devices such as Facebook Live, Instagram Stories, Snapchat, etc. pressurises the network operators to increase the capacity of their networks. However, a simple increase in system capacity will not be enough without considering the provisioning of Quality of Experience (QoE) as the basis for network control, customer loyalty and retention rate and thus increase in network operators revenue. As QoE is gaining strong momentum especially with increasing users’ quality expectations, the focus is now on proposing innovative solutions to enable QoE when delivering video content over heterogeneous wireless networks. In this context, this paper presents an overview of multimedia delivery solutions, identifies the problems and provides a comprehensive classification of related state-of-the-art approaches following three key directions: adaptation, energy efficiency and multipath content delivery. Discussions, challenges and open issues on the seamless multimedia provisioning faced by the current and next generation of wireless networks are also provided
Reliable Video Streaming over mmWave with Multi Connectivity and Network Coding
The next generation of multimedia applications will require the
telecommunication networks to support a higher bitrate than today, in order to
deliver virtual reality and ultra-high quality video content to the users. Most
of the video content will be accessed from mobile devices, prompting the
provision of very high data rates by next generation (5G) cellular networks. A
possible enabler in this regard is communication at mmWave frequencies, given
the vast amount of available spectrum that can be allocated to mobile users;
however, the harsh propagation environment at such high frequencies makes it
hard to provide a reliable service. This paper presents a reliable video
streaming architecture for mmWave networks, based on multi connectivity and
network coding, and evaluates its performance using a novel combination of the
ns-3 mmWave module, real video traces and the network coding library Kodo. The
results show that it is indeed possible to reliably stream video over cellular
mmWave links, while the combination of multi connectivity and network coding
can support high video quality with low latency.Comment: To be presented at the 2018 IEEE International Conference on
Computing, Networking and Communications (ICNC), March 2018, Maui, Hawaii,
USA (invited paper). 6 pages, 4 figure
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
IETF standardization in the field of the Internet of Things (IoT): a survey
Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities
- …